Tascam US-32 MiniStudio USB Podcasting Broadcast Audio Interface User Manual

소개

The TASCAM MiNiSTUDIO Personal US-32 is a desktop online broadcast studio designed for podcasters, gamers, and online broadcasters. It features a professional-quality audio interface and real-time effects to enhance your audio productions.

This manual provides instructions for setting up, operating, and maintaining your US-32 MiniStudio, along with troubleshooting tips and product specifications.

그림 1: The Tascam US-32 MiniStudio USB Podcasting Broadcast Audio Interface. This image provides a general overview 장치의.

설정

패키지 내용

모든 구성 요소가 있는지 확인하세요.

• Tascam US-32 MiniStudio Unit
• USB 케이블
• 사용 설명서 (본 문서)

장치 연결

The US-32 MiniStudio connects to your computer via a USB 2.0 cable. It can be powered by the USB bus or an optional 5V DC adapter for tablet use.

1. Connect the USB cable from the US-32 MiniStudio to an available USB port on your computer.
2. If using with a tablet or requiring external power, connect a 5V DC power adapter (not included) to the "DC IN 5V" port.
3. Ensure the POWER switch on the rear panel is in the "ON" position.

그림 2: Rear panel connections of the Tascam US-32 MiniStudio. This image displays the power switch, USB 2.0 port for computer connection, and the DC IN 5V port for external power, typically used with tablets.

소프트웨어 설치

Before using the US-32 MiniStudio, install the necessary drivers and control software from the official Tascam website. The device supports ASIO/WDM for Windows and Core Audio for Mac.

1. Visit the official Tascam support web대지.
2. Locate the drivers and control software for the US-32 MiniStudio.
3. 화면의 지시에 따라 설치 프로그램을 다운로드하고 실행하세요.
4. 메시지가 나타나면 컴퓨터를 다시 시작하세요.

작동 지침

Microphone Input Options

The US-32 MiniStudio offers versatile microphone input options:

• XLR/TRS Input Jack: For professional microphones, with switchable +48V phantom power for condenser microphones.
• Built-in Condenser Mic: For convenient, immediate use without external microphones.
• 4-pole Mini-jack: For connecting earphone/microphone headsets.

Ensure appropriate input gain is set using the dedicated knob to achieve optimal audio levels without distortion.

PON Sound Effect Buttons

The three assignable PON buttons allow for instant playback of sound effects. The unit comes with pre-loaded effects like bell, buzzer, and applause. You can also customize these buttons with your own .wav or .mp3 audio files using the control software.

1. Open the US-32 MiniStudio control software on your computer.
2. Navigate to the PON button assignment section.
3. Double-click on a button in the software interface to select an audio file (.wav or .mp3) from your computer.
4. Once assigned, press the physical PON button on the unit to trigger the sound effect during your broadcast.

Real-time Voice Effects

The US-32 MiniStudio includes real-time voice effects accessible via the control software. These effects can modify your voice with pitch shifts, echo, shortwave radio effects, and studio-quality reverb.

• Access voice effects through the control software.
• Adjust parameters such as pitch, echo depth, and reverb type.
• The "ducking" effect can automatically lower background music when you speak.

그림 3: Front panel of the Tascam US-32 MiniStudio. This image highlights the various control knobs for input levels, the three assignable PON sound effect buttons, and the prominent ON AIR button for broadcast control.

"ON AIR" Function

The "ON AIR" button integrates your voice and effects with other audio sources from your computer, such as music or video playback. Pressing this button activates the broadcast mix.

• Ensure all audio sources (microphone, computer audio, effects) are properly configured in the control software.
• Press the "ON AIR" button to begin broadcasting your mixed audio.

오디오 모니터링

The US-32 MiniStudio provides two headphone outputs for monitoring: a 1/4" output and a 1/8" output (marked "headset"). Both outputs share a single volume control.

그림 4: Tascam US-32 MiniStudio in a typical usage scenario. The device is connected to a laptop, and headphones are plugged in, demonstrating its application in a broadcasting or podcasting setup.

유지

To ensure the longevity and optimal performance of your Tascam US-32 MiniStudio, follow these maintenance guidelines:

• 청소: 제품 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 연마성 세척제, 용제 또는 왁스는 사용하지 마십시오.
• 저장: 제품을 직사광선, 극한 온도 및 높은 습도를 피해 서늘하고 건조한 곳에 보관하십시오.
• 손질: 기기를 조심스럽게 다루십시오. 떨어뜨리거나 강한 충격을 주지 마십시오.
• 통풍: 과열을 방지하기 위해 제품 주변에 적절한 환기가 이루어지도록 하십시오. 통풍구를 막지 마십시오.
• 전원 끄기 : Always power off the unit and disconnect it from the power source when not in use for extended periods or during electrical storms.

문제 해결

If you encounter issues with your US-32 MiniStudio, refer to the following common problems and solutions:

No Sound or Low Audio Output

• 연결 확인: Ensure all cables (USB, microphone, headphones) are securely connected.
• 볼륨 레벨: Verify that the input gain knobs on the US-32 and the master volume control are turned up. Check software volume settings on your computer.
• 팬텀 파워 : If using a condenser microphone, ensure +48V phantom power is enabled for the XLR input.
• 마이크 유형: Some high-end dynamic microphones may require an external preamp for optimal gain, as the built-in preamps might not provide sufficient amplification for all models.
• 소프트웨어 설정: Confirm that the US-32 MiniStudio is selected as the default audio input/output device in your computer's sound settings and your broadcasting software.

Background Noise or Hum

• 접지 루프: Try connecting the computer and US-32 to the same power outlet or using a ground loop isolator.
• 케이블 품질: Use high-quality, shielded cables for microphones and other connections.
• 이득 Staging: Ensure input gain is set appropriately. Too high gain can amp소음을 줄입니다.
• 환경: Minimize electrical interference from other devices (e.g., fluorescent lights, power adapters).

PON Buttons or Effects Not Working

• 소프트웨어 실행 중: The PON buttons and voice effects require the Tascam control software to be running in the background.
• 과제: Verify that sound files are correctly assigned to the PON buttons within the software.
• Default Audio Device: Ensure the US-32 is set as the default audio device, as some effects may route through it.

컴퓨터에서 장치를 인식하지 못했습니다

• USB 연결: 다른 USB 포트나 USB 케이블을 사용해 보세요.
• 운전자: Reinstall the latest drivers from the Tascam web대지.
• 힘: Ensure the unit is powered on. If using external power, verify the adapter is working.
• 다시 시작: Restart your computer and the US-32 MiniStudio.

명세서

Note: While specifications mention "6 AA batteries required," the primary power source for the US-32 is typically USB bus power or an optional 5V DC adapter. Please refer to the official Tascam documentation for definitive power requirements.

보증 및 지원

For warranty information, technical support, or service inquiries, please contact Tascam customer support directly or visit their official web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

Tascam Official Web대지: https://tascam.com/us/