1. 서론
1.1개 제품 이상view
The ASTRALPOOL Peristaltic Pump, Model 57178, is designed for precise fluid dosing applications. This pump features continuous flow regulation, adjustable from 0% to 100% of its maximum capacity. Flow adjustment is managed by varying the motor speed via a potentiometer conveniently located on the pump's front panel. It is capable of delivering up to 12 liters per hour at a maximum pressure of 1 bar.
1.2 안전 정보
Please read and understand all safety instructions before installing, operating, or performing maintenance on this pump. Failure to follow these instructions may result in personal injury or equipment damage.
- 설치나 유지관리를 하기 전에는 반드시 전원을 분리하세요.
- Ensure the pump is installed in a dry, well-ventilated area, protected from direct sunlight and extreme temperatures.
- 전원 공급 장치의 볼륨을 확인하십시오.tage matches the pump's requirements (230 Volts AC).
- Do not operate the pump with damaged cables or connections.
- Wear appropriate personal protective equipment (PPE) when handling chemicals or performing maintenance.
2. 설정 및 설치
2.1 펌프 장착
Select a stable, vertical surface for mounting the pump. Ensure there is adequate space around the pump for ventilation and access for maintenance. Use appropriate fasteners to secure the pump firmly to the chosen surface.
2.2 전기 연결
The pump requires a 230 Volts AC power supply. Connect the pump to a grounded electrical outlet. It is recommended to use a dedicated circuit with appropriate overcurrent protection. Consult a qualified electrician if you are unsure about electrical connections.
2.3 Fluid Connections
Identify the inlet and outlet ports on the pump. The inlet port typically draws fluid from the source, and the outlet port delivers the fluid. Connect appropriate tubing to these ports, ensuring all connections are secure and leak-free. Use tubing compatible with the fluid being pumped and capable of withstanding the operating pressure.
This image displays the Astralpool Peristaltic Pump, model 57178. The pump features a blue casing with a transparent front cover, allowing visibility of the internal peristaltic mechanism and tubing. At the bottom, two black connection ports are visible for fluid inlet and outlet.
3. 사용 설명서
3.1 초기 시동
- Ensure all fluid connections are secure and the pump is properly mounted.
- Verify that the fluid source is available and the discharge line is correctly routed.
- Plug the pump into the power supply.
3.2 Flow Regulation
The pump's flow rate is adjusted using the potentiometer located on the front panel. Rotate the potentiometer clockwise to increase the flow rate and counter-clockwise to decrease it. The flow can be continuously regulated from 0% to 100% of the pump's maximum capacity (12 L/H).
4. 유지관리
4.1 일반 유지 관리
- Regularly inspect the tubing for signs of wear, cracks, or blockages. Replace tubing as necessary.
- Check all connections for leaks and tighten if required.
- Keep the pump's exterior clean and free from dust and debris.
4.2 청소
To clean the pump, first disconnect it from the power supply. Wipe the exterior with a damp cloth. If the internal tubing requires cleaning, follow the manufacturer's guidelines for flushing the system with an appropriate cleaning solution, ensuring it is compatible with the pump materials and the fluids being handled.
5. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 시작되지 않습니다 | 전원 공급이 없습니다 손상된 전원 케이블 | 전원 연결 및 콘센트를 확인하세요 Inspect and replace cable if damaged |
| 유체 흐름 없음 | 튜브가 꼬이거나 막혔습니다. 입구 필터 막힘 Potentiometer set to 0% | 배관을 점검하고 청소하십시오. 흡입 필터를 청소하거나 교체하세요 Adjust potentiometer to desired flow rate |
| Inconsistent flow | 라인의 공기 Worn tubing | 시스템에서 공기 빼기 Replace peristaltic tubing |
| 연결 부위 누출 | 느슨한 연결 Damaged seals/tubing | 모든 연결을 조입니다 Inspect and replace seals or tubing |
6. 기술 사양
| 사양 | 값 |
|---|---|
| 상표 | 아스트랄풀 |
| 모델 번호 | 57178 |
| 제품 크기(L x W x H) | 23 x 11 x 13cm |
| 무게 | 900그램 |
| 권tage | 230볼트(AC) |
| 유량 | Up to 12 L/H (continuously adjustable) |
| 최대 압력 | 1바 |
| 예비 부품 가용성 | 정보를 사용할 수 없습니다 |
