소개
The Kanto PMX680 Full Motion Pro Series TV Mount is designed to provide versatile and secure mounting for flat panel televisions. This mount offers adjustable positioning, integrated cable management, and toolless tilt functionality to enhance your viewing experience. It is engineered for durability and ease of use, ensuring a reliable solution for your home or professional setup.
This manual provides comprehensive instructions for the safe and correct installation, operation, and maintenance of your Kanto PMX680 TV Mount.
상자 안에 무엇이 들어있나요?
- Kanto PMX680 Full Motion TV Mount
- All necessary mounting hardware for wood studs and concrete installation
- 설치 설명서
- Punched cardboard template for drilling
설정 및 설치
Proper installation is crucial for the safety and performance of your TV mount. Please follow these steps carefully. It is recommended to have assistance when lifting and mounting the television.
설치 비디오 가이드
This video provides a detailed guide for installing Kanto PMX Series Full Motion TV Mounts. It covers preparing the TV, mounting the wall plate, and attaching the arm assembly.
단계별 설치
- TV 준비:
Attach the TV brackets to the back of your television using the appropriate screws and spacers from the provided hardware kit. Ensure the brackets are securely fastened and evenly spaced.
이미지: 후면 view of a television with the vertical mounting brackets secured to the VESA holes.
- Locate Wall Studs/Mounting Area:
Use a stud finder to locate the center of your wall studs. Mark the desired height for the top of your TV mount. For concrete walls, ensure the area is suitable for drilling.
- 벽면 플레이트 부착:
Position the wall plate against the wall, aligning it with the marked stud locations. Use the provided template to mark the drill holes. Drill pilot holes as instructed in the manual for your wall type (wood stud or concrete). Secure the wall plate to the wall using the lag bolts and washers. Ensure it is level and firmly attached.
Image: The wall plate component of the TV mount, securely fastened to a wall.
- 암 어셈블리 부착:
The arm assembly can be easily attached to the installed wall plate. Align the arm assembly with the wall plate and secure it using the designated bolts. This design allows for easier installation by reducing the initial weight during wall plate mounting.
Image: The full motion arm assembly extended from the wall plate, showing its articulation.
- TV 설치:
With assistance, carefully lift your television and hook the attached TV brackets onto the arm assembly. Ensure the TV is securely seated. Engage any safety locks or screws as per the detailed instructions in the included manual to prevent accidental dislodgement.
TV 마운트 작동 방법
The Kanto PMX680 mount offers flexible positioning to achieve optimal viewing angles from various locations in your room.
실제 작동 중인 주요 기능
This video demonstrates the professional features and flexibility of the Kanto PMX Series TV Mounting Solutions, including extension, swivel, and tilt capabilities.
This video highlights the features of the Kanto PMX680 Full Motion Pro Series TV Mount, showcasing its adjustable positioning and integrated cable management.
Adjusting Your TV Mount
- 확장 및 수축:
Gently pull or push the television to extend it up to 24 inches (61.3 cm) from the wall or retract it to sit 2.5 inches (6.3 cm) from the wall. The smooth articulation allows for easy movement.
Image: The TV mount fully extended, showing the maximum reach from the wall.
- 기울기 조정:
The accessible toolless tilt mechanism allows for a tilt range of +12 degrees to -3 degrees. Use the lever to adjust the tension and set your desired tilt angle to reduce glare or optimize view잉 높이.
Image: The TV mount with the screen tilted downwards, demonstrating the tilt feature.
Image: A close-up of the lever used for toolless tilt adjustment on the mount.
- 회전 조정:
Swivel your television up to 90 degrees in either direction, depending on your screen size, to achieve the perfect viewing angle from any seat in the room.
- Horizontal Offset and Leveling:
The mount provides 9 inches (22.8 cm) of horizontal offset and adjustable horizontal leveling, allowing you to perfectly center your TV even if wall studs are not ideally placed.
- 케이블 관리 :
Utilize the integrated cable management clips and aluminum covers to route and conceal cables along the arms of the mount, maintaining a clean and organized appearance.
Image: Cables neatly routed through the cable management clips on the mount's articulating arms.
유지
To ensure the longevity and safe operation of your Kanto PMX680 TV Mount, periodic maintenance is recommended:
- 정기 검사: 모든 나사, 볼트 및 연결부가 단단히 조여져 있는지 주기적으로 점검하십시오.
- 청소: 먼지를 제거하려면 부드럽고 마른 천으로 거치대를 닦으십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제 사용은 피하십시오.
- 매끄럽게 하기: If movement becomes stiff over time, a small amount of silicone-based lubricant can be applied to the articulating joints.
문제 해결
If you encounter any issues with your Kanto PMX680 TV Mount, refer to the following common troubleshooting tips:
- TV 수평이 맞지 않음: Check the horizontal leveling adjustment on the mount. Ensure the wall plate was installed level. Minor adjustments can often be made using the built-in leveling features.
- Mount Movement is Stiff: Ensure all pivot points are free of obstructions. If necessary, apply a small amount of silicone lubricant to the moving parts.
- TV Feels Unstable: Immediately re-check all mounting hardware and TV bracket connections. Ensure all bolts are tightened to the recommended torque. If the issue persists, consult a professional installer.
- Cables are Pinched: Re-route cables through the cable management clips, ensuring they have enough slack to accommodate the full range of motion of the mount.
명세서
| 모델 번호 | PMX680 |
| TV 크기 호환성 | 39" to 80" flat panel TVs |
| 중량 용량 | 최대 125lb(57kg) |
| VESA 호환성 | 200x100 ~ 700x400 |
| 벽에서 연장된 부분 | 최대 24인치(61.3cm) |
| Retracted Profile | 2.5" (6.3 cm) from wall |
| 스터드 간격 | Accommodates 24" stud spacing |
| 기울기 범위 | +12° to -3° (Toolless) |
| 스위블 범위 | Up to 90° in either direction (screen size dependent) |
| 수평 오프셋 | 9인치(22.8cm) |
| 인증 | cULus 인증 |
| 재료 | 금속 |
| 색상 | 검은색 |
| 품목 무게 | 32파운드 |
| 제품 치수 | 28.9 x 24 x 15.7 인치 |
보증 및 지원
The Kanto PMX680 Full Motion Pro Series TV Mount comes with a Ten-Year Manufacturer's Warranty품질과 내구성에 대한 안심을 보장합니다.
For further assistance, technical support, or warranty claims, please contact Kanto customer service. Refer to the contact information provided in your product packaging or visit the official Kanto web대지.
Kanto Living: Visit the Kanto Store on Amazon
