비셀 크로스웨이브 17132 3-in-1 다용도 바닥 청소기 사용 설명서

제품 끝view

The BISSELL CrossWave 17132 is a versatile 3-in-1 multi-surface floor cleaner designed to vacuum, wash, and dry hard floors, carpets, and rugs simultaneously. This integrated cleaning system offers an efficient alternative to traditional vacuuming and mopping, providing thorough cleaning with less effort. Its dual tank technology ensures that clean water and formula are always separate from dirty water, guaranteeing a fresh clean every time.

포함된 구성 요소

Before beginning assembly, ensure all components are present in the packaging:

• BISSELL CrossWave 17132 Unit (Main Body and Handle)
• Multi-Surface Cleaning Formula (Detergent)
• Multi-Surface Brush Roll (Replacement Brush)
• Storage and Cleaning Tray (Station)

Image: The BISSELL CrossWave 17132 unit shown with its accompanying multi-surface cleaning formula, an extra brush roll, and the storage and cleaning tray.

설치 지침

집회

1. 손잡이를 본체에 딸깍 소리가 나면서 제자리에 단단히 고정될 때까지 삽입하십시오.
2. Ensure the clean water tank is properly seated on the back of the unit.
3. Ensure the dirty water tank is properly seated on the front of the unit.

깨끗한 물 탱크 채우기

1. 기기 뒷면에서 깨끗한 물통을 분리하세요.
2. 탱크 바닥의 캡을 풉니 다.
3. Fill the tank with warm tap water up to the 'Water' fill line for the desired cleaning area (small or large).
4. Add the BISSELL Multi-Surface Cleaning Formula up to the corresponding 'Formula' fill line.
5. Replace the cap and reinsert the tank into the machine, ensuring it is securely latched.

작동 지침

전원 켜기 및 모드 선택

1. 전원 코드를 접지된 콘센트에 꽂으세요.
2. 손잡이에 있는 전원 버튼을 눌러 기기를 켜세요.
3. Use the fingertip controls on the handle to select the appropriate cleaning mode: 단단한 바닥 or 지역 깔개.

세척 과정

To dispense cleaning solution, hold down the spray trigger located on the handle. Release the trigger to stop dispensing.

For best results, make a wet pass by holding the spray trigger and moving the machine slowly forward and backward. Then, make a dry pass by releasing the trigger and moving the machine over the same area to suction up the dirty solution.

Image: A user operating the BISSELL CrossWave 17132 on a hard floor, demonstrating its cleaning action on a liquid spill.

Image: The BISSELL CrossWave 17132 cleaning a tiled floor, effectively picking up scattered dry debris and wet messes.

유지 보수 및 관리

더러운 물 탱크 비우기 및 청소

1. 기계를 끄고 플러그를 뽑습니다.
2. 세탁기 앞쪽에서 오수통을 분리하세요.
3. 필터를 조심스럽게 제거하고 더러운 물을 버리세요.
4. Rinse the tank and filter thoroughly with water. Allow the filter to air dry completely before reinserting.
5. Replace the filter and reattach the dirty water tank to the machine, ensuring it is securely latched.

Cleaning the Brush Roll and Brush Roll Window

1. 기계를 끄고 플러그를 뽑습니다.
2. 브러시 롤 창을 분리하려면 탭을 위로 당기세요.
3. Remove the brush roll by grasping the tab and pulling it out.
4. Rinse the brush roll and brush roll window under running water. Remove any hair or debris.
5. Allow both to air dry completely before reassembling.
6. Reinsert the brush roll, ensuring it clicks into place, then reattach the brush roll window.

이미지: 클로즈업 view of the BISSELL CrossWave 17132's brush roll and base, highlighting the multi-surface brush for effective cleaning.

Using the Storage and Cleaning Tray

After each use, place the CrossWave on the storage and cleaning tray. Fill the tray with water up to the indicated line. Run the machine for approximately 10-20 seconds to rinse the brush roll and internal components. This helps prevent odors and maintains performance.

문제 해결

Machine Not Dispensing Solution

• Check if the clean water tank is properly filled and seated.
• Ensure the spray trigger is being held down during operation.
• Verify that the formula cap is securely tightened.

흡입 불량

• 오수 탱크가 가득 차서 비워야 하는지 확인하십시오.
• Ensure the dirty water tank is properly seated and sealed.
• Inspect the brush roll and brush roll window for clogs or debris.
• 필터를 청소하고 재설치하기 전에 완전히 건조시키십시오.

기계가 켜지지 않음

• Verify the power cord is securely plugged into a working electrical outlet.
• 작동된 회로 차단기가 있는지 확인하십시오.

제품 사양

보증 및 지원

For warranty information, technical support, or to purchase replacement parts and cleaning formulas, please visit the official BISSELL website or contact BISSELL customer service. Always use genuine BISSELL replacement parts and cleaning formulas to ensure optimal performance and to maintain your warranty.

제공된 데이터를 기준으로 볼 때, 판매자가 제공하는 공식 제품 비디오는 내장할 수 없습니다.