Keeley Bubble Tron Dynamic Flanger Phaser Instruction Manual

1. 제품 오버view

The Keeley Bubble Tron Dynamic Flanger Phaser and Random Synth Filter is a versatile effects pedal designed to produce unique modulation sounds. Inspired by classic dynamic flangers and phasers, this pedal offers three distinct modes of operation: Dynamic Flange, Dynamic Phase, and Random Filter. It allows for expressive control over your guitar's signal, reacting to your pick attack and playing dynamics to create a range of sonic textures.

Figure 1: Keeley Bubble Tron Dynamic Flanger Phaser Pedal.

The pedal features a simple yet powerful control layout, allowing users to dial in subtle or extreme effects. Its dynamic response makes it an intuitive tool for guitarists seeking to add expressive modulation to their sound.

2. 설정

To set up your Keeley Bubble Tron pedal, follow these steps:

1. 전원 연결: Connect a standard 9V DC power supply (center negative, 65mA+ current draw) to the 9V jack on the pedal. Ensure the power supply meets these specifications to prevent damage.
2. 입력 연결: 기타 또는 다른 악기를 표준 1/4인치 악기 케이블을 사용하여 페달 오른쪽의 "INPUT" 잭에 연결하십시오.
3. 출력 연결: 페달 왼쪽의 "OUTPUT" 잭을 전원에 연결하세요. amp표준 1/4인치 악기 케이블을 사용하여 신호 체인의 다음 페달이나 리파이어를 연결합니다.
4. 초기 설정: Before engaging the pedal, set all knobs to their 12 o'clock position and ensure the mode switch is in the middle (Phase) position for a neutral starting point.

3. 사용 설명서

The Keeley Bubble Tron offers a variety of controls to shape your sound. Familiarize yourself with each knob and switch:

통제 수단:

• RATE (FDBK):
  • In Filter & Phase modes: Controls the rate of the LFO.
  • In Flange mode: Controls feedback. Turning left provides maximum negative feedback; turning right provides maximum positive feedback.
• SENS(민감도):
  • In Filter mode: Controls envelope sensitivity, acting like a synth filter.
  • In Phase & Flange modes: Controls input sensitivity, determining the point at which dynamic control is triggered. Start with this knob at full left and adjust for desired responsiveness.
• DEPTH (Shape):
  • In Filter mode: Selects LFO shape (from full left: ramp 위로, ramp down, random, or triangle).
  • In Phase & Flange modes: Sets the depth of the effect for mild or lush sounds.
• 수준: 효과의 전반적인 출력 레벨을 제어합니다.
• 풋스위치: 이 효과를 켜거나 끕니다.

Mode Select Switch:

• 쪽으로: Activates Filter mode.
• 가운데: Activates Phase mode.
• 내려가는: Activates Flange mode.

Figure 2: Bank A (Default Mode) Control Layout. This mode is active when the internal switch is set to Bank A.

Internal Mini Toggles (Bank Selection):

The Bubble Tron features internal mini toggles to expand its sonic capabilities. To access these, you will need to remove the back plate of the pedal.

• ANALOG FILTER (Vintage/Modern):
  • 빈tage 모드: Rolls off some high frequencies for a warmer tone.
  • 최신 모드: Provides full-range clarity (default setting).
• BANK TOGGLE (Bank 1/Bank 2):
  • Bank 1 (Default): Offers Sample & Hold Filter, Dynamic Phaser, and Dynamic Flanger modes.
  • 은행 2: Offers Envelope Filter, Standard 8-Stage Phaser, and Standard Classic Flanger modes.

Figure 3: Bank B Control Layout. Access this mode by switching the internal Bank Toggle from Bank A to Bank B.

Figure 4: Internal Mini Toggles for Analog Filter and Bank Selection.

Figure 5: External Toggle Switch modes for Bank 1 and Bank 2.

4. 유지관리

To ensure the longevity and optimal performance of your Keeley Bubble Tron, observe the following maintenance guidelines:

• 청소: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, as these can damage the finish.
• 저장: 페달은 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오. 장기간 사용하지 않을 경우 전원을 차단하십시오.
• 전원 공급 장치: Always use a regulated 9V DC power supply with a center-negative polarity and sufficient current (65mA+). Incorrect power supplies can cause damage and void the warranty.
• 사이: Ensure all cables are securely connected. Avoid excessive force when plugging or unplugging cables.

5. 문제 해결

If you encounter issues with your Keeley Bubble Tron, try these troubleshooting steps:

• 소리 없음:
  • 모든 케이블 연결 상태(입력, 출력, 전원)를 확인하십시오.
  • Verify the power supply is correctly connected and providing the specified 9V DC.
  • 악기와 amplifier가 올바르게 작동하고 있습니다.
  • Bypass the pedal to confirm the issue is with the pedal itself.
• 원치 않는 소음/윙윙거림:
  • 고품질의 절연된 전원 공급 장치를 사용하세요.
  • 결함이 있는 케이블이 있는지 확인하세요.
  • 접지가 제대로 되어 있는지 확인하십시오. amp리파이어 및 기타 장비.
• Effect Not Engaging/Responding:
  • Check the footswitch functionality.
  • Adjust the SENS (Sensitivity) knob, especially in dynamic modes, to ensure it's set appropriately for your playing style and instrument output.
  • Verify the MODE SELECT switch is in the desired position.

6. 사양

7. 보증 및 지원

For warranty information and technical support, please refer to the official Keeley Electronics web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

공식적인 Web대지: Keeley Electronics Store