Onset UA-003-64

Onset HOBO UA-003-64 펜던트 이벤트 및 온도 데이터 로거 사용 설명서

1. 서론

The Onset HOBO UA-003-64 Pendant Event and Temperature Data Logger is designed for accurate measurement of environmental conditions. This device efficiently collects and stores instantaneous contact event and temperature data, making it suitable for various monitoring applications, including rainfall measurement when paired with a tipping-bucket rain gauge. This manual provides essential information for the proper setup, operation, and maintenance of your data logger.

2. 제품 오버view

The HOBO UA-003-64 is a compact, waterproof data logger capable of recording both contact events and temperature. It is typically used with an optical base station (such as the BASE-U-4) for data offload and configuration. The device is designed for deployment in various environments, including outdoor and condensing conditions.

Onset HOBO UA-003-64 Pendant Event and Temperature Data Logger with Optical Base Station

An image showing the Onset HOBO UA-003-64 Pendant Event and Temperature Data Logger, which is a small yellow rectangular device with a white cable connected to it. Next to it is the smaller black Optic Base Station BASE-U-4 with a USB cable.

3. 특징

  • 2-wire interface sensor for mechanical and electrical contact closure measurement.
  • Maximum measurement rate of 1 Hz (1 pulse per second).
  • 온도 측정 범위: -20°C ~ 70°C.
  • User-replaceable coin cell lithium battery with a 1-year lifespan.
  • Waterproof housing suitable for outdoor or condensing environments, submersible up to 30 meters (100 feet).

4. 패키지 내용

기본 구성품에는 다음과 같은 구성 요소가 포함됩니다.

  • UA-003-64 Pendant Event and Temperature Data Logger
  • Optic Base Station BASE-U-4
  • Free software download (available from the manufacturer's web대지)

5. 설정

  1. 소프트웨어 설치: Download and install the HOBOware software from the Onset website onto your computer. This software is required to configure the data logger and offload data.
  2. 기지국 연결: Connect the Optic Base Station BASE-U-4 to your computer's USB port.
  3. Connect Data Logger: Place the UA-003-64 data logger onto the optical base station. Ensure a secure connection for data transfer and configuration.
  4. Configure Logger: Use the HOBOware software to configure the logging interval, start time, and other parameters for your specific application.
  5. 전개: Deploy the data logger in the desired monitoring location. For accurate temperature measurements in direct sunlight, it is recommended to use a solar radiation shield (e.g., RS1 or M-RSA, sold separately).

6. 사용 설명서

Once configured and deployed, the UA-003-64 data logger will automatically begin recording data based on your settings. Event data is stored only when an event occurs, optimizing memory usage.

  • 데이터 수집: The logger continuously monitors and records contact events and temperature at the specified intervals.
  • Data Offload: To retrieve data, connect the data logger to the optical base station and then to your computer. Use the HOBOware software to offload the recorded data.
  • 데이터 분석: The HOBOware software allows you to view, plot, and analyze the collected data. Detailed event data is accessible for in-depth analysis.

7. 유지관리

  • 배터리 교체: The data logger uses a user-replaceable coin cell lithium battery with an approximate 1-year lifespan. Refer to the full product manual for detailed instructions on safe battery replacement.
  • 청소: Keep the data logger and optical base station clean. Wipe with a damp 필요에 따라 천으로 닦아주세요. 강한 화학 물질이나 연마재는 사용하지 마세요.
  • 방수 하우징: Ensure the waterproof housing is intact and free from cracks or damage before deployment in wet environments.

8. 문제 해결

  • Logger Not Responding: Ensure the battery is properly installed and has sufficient charge. Reconnect the logger to the optical base station and computer.
  • 데이터 전송 문제: Verify that the HOBOware software is correctly installed and the optical base station is properly connected to the computer. Ensure the data logger is securely seated on the base station.
  • 부정확한 온도 측정값: If deployed in direct sunlight, ensure a solar radiation shield is used to prevent solar heating effects on temperature measurements.

9. 사양

사양
제조업체발병 컴퓨터
부품 번호UA-003-64-KIT
제품 무게50g
제품 크기(LxWxH)7.1 x 2.3 x 3.3cm
배터리 유형1개의 리튬 금속 배터리(포함)
스타일현대의
모양직사각형
전원배터리 구동
특징방수복
ASINB01H2DX1D0
첫 번째 가능한 날짜2018/09/04

10. 보증 및 지원

For detailed warranty information and technical support, please refer to the official Onset Computer Corporation web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.

관련 문서 - UA-003-64

사전view HOBO 펜던트 온도 데이터 로거 UA-001-xx 사용 설명서
Onset HOBO 펜던트 온도 데이터 로거(모델 UA-001-08 및 UA-001-64)에 대한 포괄적인 사용 설명서로, 사양, 연결, 설정, 작동, 알람 구성 및 배터리 교체에 대한 자세한 내용을 설명합니다.
사전view HOBO 펜던트 G 가속도 데이터 로거 - 사용 설명서
HOBO 펜던트 G 가속도 데이터 로거에 대한 종합 가이드입니다. 기능, 사양, 작동, 연결, 로깅 모드, 장착, 보호, 배터리 교체 및 지원에 대한 내용을 다룹니다. 측정 범위, 정확도, 로깅 간격, 온도 등급 및 보증 정보에 대한 자세한 정보가 포함되어 있습니다.
사전view HOBOware 사용자 가이드 - Onset 데이터 로깅 소프트웨어
Onset의 HOBOware 소프트웨어에 대한 종합적인 사용자 가이드로, HOBO 데이터 로거 및 무선 HOBO 노드의 데이터를 실행, 판독, 플롯 및 분석하는 방법을 자세히 설명합니다. HOBOware Pro 및 Lite의 기능, 설정, 데이터 분석 도구, 그리고 환경 모니터링을 위한 장치 관리 방법을 다룹니다.
사전view HOBO MX801 잠수형 로거 빠른 시작 가이드
HOBO MX801 잠수형 로거에 대한 빠른 시작 가이드. 자세한 내용은 다음과 같습니다.view, 센서 연결, 보정, 구성, 배포, 데이터 다운로드 및 처리.
사전view HOBO MX1101 온도/습도 데이터 로거 사용 설명서
HOBO MX1101 온도/습도 데이터 로거의 기능, 사양, 설정, 작동 및 문제 해결 방법을 자세히 설명하는 종합적인 사용 설명서입니다. Bluetooth Smart 기능을 탑재한 이 로거를 실내 환경 모니터링에 활용하고, 구성, 배포 및 데이터 판독하는 방법을 알아보세요.
사전view HOBO Pendant MX Temp (MX2201) & Temp/Light (MX2202) Logger Quick Start Guide
Quick start guide for Onset HOBO Pendant MX2201 and MX2202 data loggers, covering app setup, logger connection, deployment, and data offloading.