FIBARO Flood Sensor FGFS-101 ZW5 User Manual

소개

The FIBARO Flood Sensor FGFS-101 ZW5 is a highly functional Z-Wave Plus water leak detector designed for smart home environments. This device can be placed on the floor or mounted on a wall using extended wire probes. It offers flexible power options, operating on either battery or 12/24 VDC. Key features include a built-in tilt sensor to report device movement, and an integrated temperature sensor that can alert users to significant temperature changes, helping to prevent damage from issues like frozen pipes. The sensor is buoyant, allowing it to float on water surfaces, and is compatible with various Z-Wave smart hubs.

제품 끝view

The FIBARO Flood Sensor is engineered to provide reliable water detection and environmental monitoring. Its compact design integrates advanced features for comprehensive home protection.

주요 특징:

• Z-Wave Plus 인증: Ensures enhanced compatibility, longer battery life, and improved range within your Z-Wave network.
• 물 누수 감지: Utilizes three 24K gold-plated telescopic probes for ultra-sensitive and corrosion-resistant water detection on both even and uneven surfaces.
• 온도 센서: Monitors ambient temperature and can trigger alerts for critical spikes or drops, useful for preventing issues like frozen pipes.
• 기울기 센서: Detects any movement or change in the device's location, providing tamp어 보호.
• 이중 전원 옵션: Can be powered by a CR123A battery (included) or an external 12/24 VDC power supply. When DC powered, it acts as a Z-Wave repeater.
• 방수 케이스: Durable housing designed to resist scratches and function effectively even when submerged.
• Buoyant Design: The sensor floats on water, ensuring continuous operation during flooding.
• 알람 시스템 통합: Can be integrated with wired alarm systems.
• Network Range Tester: Built-in tool to assist with optimal placement in remote areas.

그림 1: 전면 view of the FIBARO Flood Sensor FGFS-101 ZW5, showing its compact, white, oval design.

Figure 2: Image displaying various Z-Wave hubs compatible with the FIBARO Flood Sensor, including FIBARO, Hubitat, SmartThings, and HomeSeer.

설정

1. 개봉 및 초기 검사:

Carefully remove the FIBARO Flood Sensor from its packaging. Ensure all components, including the sensor, CR123A battery, and user manual, are present. Inspect the device for any visible damage.

2. 장치 전원 공급:

The Flood Sensor can be powered in two ways:

• 배터리 전원: The sensor comes with one CR123A battery. To install or replace the battery, twist the top cover counter-clockwise to open the device. Insert the battery according to the polarity markings. The battery lifetime is approximately 2.5 years.
• VDC Power (Optional): For continuous power and Z-Wave repeater functionality, the sensor can be connected to a 12/24 VDC power supply. Connect the VDC wires to the appropriate terminals inside the sensor. Refer to the detailed wiring diagram in the full product manual for correct connections.

3. Adding to a Z-Wave Network (Inclusion):

To integrate the Flood Sensor into your smart home system:

1. Place the Flood Sensor within direct range of your Z-Wave controller.
2. Z-Wave 컨트롤러를 포함(추가) 모드로 설정하십시오. 자세한 지침은 컨트롤러 설명서를 참조하십시오.
3. Quickly triple-click the B-button located inside the sensor. The LED indicator will flash to confirm inclusion mode.
4. Once successfully added, the LED will stop flashing. The sensor should now appear in your Z-Wave controller's device list.

메모: If using a DC power supply with a battery backup, some Z-Wave hubs (e.g., Hubitat) may report incorrect battery levels or drain the battery quickly. It is recommended to consult your specific hub's documentation or community forums for optimal configuration.

4. 배치:

Position the Flood Sensor in areas prone to water leaks, such as:

• 싱크대 아래
• 세탁기나 식기세척기 근처
• 지하실이나 다용도실
• 온수기 근처

The gold-plated probes should make contact with the surface where water detection is desired. For wall mounting or hard-to-reach areas, additional wired probes can be connected to the SENS1 and SENS2 terminals inside the device.

작동 지침

1. Water Detection:

When the sensor's probes detect water, it will immediately:

• Emit an audible alarm.
• Flash its LED indicator.
• Send an alert to your Z-Wave controller, which can then notify you via smartphone, tablet, or email, and trigger predefined scenes or actions (e.g., shut off a water valve, turn on lights).

2. 온도 모니터링:

The integrated temperature sensor continuously monitors the environment. If a sudden or critical change in temperature is detected (e.g., a sharp drop indicating potential freezing conditions), the sensor can alert your Z-Wave controller. This feature is crucial for protecting pipes from freezing and bursting.

3. Tilt and Tamp어 탐지:

The built-in tilt sensor detects any unauthorized movement or removal of the device. If the sensor is tilted or moved from its intended position, it will send a tamper alert to your Z-Wave controller, enhancing the security of your monitoring setup.

유지

1. 배터리 교체:

When the battery level is low, the sensor will send a low battery warning to your Z-Wave controller. To replace the CR123A battery:

1. Twist the top cover of the sensor counter-clockwise to open it.
2. 오래된 배터리를 제거하세요.
3. 새로운 CR123A 배터리를 삽입할 때 극성을 확인하십시오.
4. Replace the top cover by aligning the marks and twisting clockwise until secure.

현지 규정에 따라 오래된 배터리를 책임감 있게 폐기하십시오.

2. 청소:

Clean the sensor's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the gold-plated probes are free from dirt or debris to maintain optimal detection sensitivity.

문제 해결

• Sensor not responding/not detected by Z-Wave controller:
  • Ensure the sensor is within range of your Z-Wave controller.
  • 배터리 잔량을 확인하고 필요한 경우 교체하십시오.
  • Verify that your Z-Wave controller is in inclusion mode when attempting to add the device.
  • Perform a factory reset on the sensor (refer to the full manual for specific steps) and attempt inclusion again.
• 오경보:
  • Ensure the probes are clean and free from moisture or conductive debris when no actual leak is present.
  • Check for condensation in high-humidity environments that might trigger the sensor.
• Battery drains quickly when DC powered:
  • Some Z-Wave hub drivers may not correctly manage power switching between DC and battery. Consult your specific Z-Wave hub's support resources or community forums for potential workarounds or driver updates.
  • If using DC power, consider removing the battery if a backup is not strictly required, or if your hub's integration causes issues.

명세서

보증

The FIBARO Flood Sensor FGFS-101 ZW5 comes with a 1년 보증 from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. For warranty claims or detailed terms and conditions, please refer to the official FIBARO web사이트를 방문하거나 고객 지원팀에 문의하세요.

지원하다

For further assistance, technical support, or to access the complete product manual, please visit the official FIBARO website or contact their customer service department. You can also find helpful resources and community support on various Z-Wave smart home forums.