1. 서론
This manual provides essential instructions for the safe installation, operation, and maintenance of your BFT ICARO Slide Gate Opener. The ICARO series is designed for intensive use, offering robust performance and reliability for sliding gates. Please read this manual thoroughly before proceeding with any installation or operation to ensure proper function and to prevent damage or injury.
The BFT ICARO Slide Gate Opener features a monoblock gear motor structure, ensuring maximum resistance and performance in various environmental conditions. It includes proximity limit switches for accurate gate positioning and a control unit with a programming display and D-Track torque, speed, and position management system. An incorporated dual-channel radio receiver simplifies remote control integration.
Figure 1: BFT ICARO Slide Gate Opener main unit. This image shows the compact design and robust casing of the gate opener.
2. 안전 정보
경고: Failure to follow these safety instructions could result in serious injury or death, and/or damage to the product or property.
- 설치 및 수리는 자격을 갖춘 담당자만 수행해야 합니다.
- 유지보수 또는 수리 작업을 수행하기 전에 반드시 전원 공급 장치를 차단하십시오.
- Keep hands, feet, and clothing clear of the gate and opener while the system is in operation.
- 어린이가 출입문 개폐 장치를 가지고 놀거나 조작하지 못하게 하십시오.
- 정기적으로 대문과 개폐 장치를 점검하여 마모, 손상 또는 정렬 불량 징후가 있는지 확인하십시오.
- 끼임 사고를 방지하기 위해 광전지 및 안전 모서리와 같은 안전 장치를 설치하십시오.
- Ensure the gate moves freely and is properly balanced before installing the opener.
3. 설정 및 설치
This section outlines the general steps for installing the BFT ICARO Slide Gate Opener. For detailed diagrams and specific wiring instructions, refer to the separate installation guide provided with your product.
3.1 사이트 준비
- Ensure the gate track is clean and free of obstructions.
- Verify the gate slides smoothly by hand and is properly aligned.
- Prepare a stable concrete base for mounting the opener unit, ensuring it is level and positioned correctly relative to the gate.
3.2 오프너 장착
- Securely fasten the opener unit to the prepared concrete base using appropriate anchor bolts.
- Ensure the pinion gear is correctly aligned with the gate's rack, maintaining a small clearance (approx. 1-2 mm) to allow for thermal expansion.
3.3 전기 연결
- Connect the main power supply (230 V, 60 Hz single-phase) to the control unit, ensuring all connections comply with local electrical codes.
- Wire all safety devices (photocells, safety edges) to the control unit as per the wiring diagram.
- Connect any accessories such as remote receivers or keypads.
3.4 초기 프로그래밍
- Power on the unit. The integrated LEO B CBB control panel will display programming options.
- Follow the on-screen instructions to perform an auto-setup cycle, which will detect the gate's travel limits and adjust motor parameters.
- Test all safety devices to ensure they function correctly before operating the gate automatically.
4. 사용 설명서
The BFT ICARO Slide Gate Opener can be operated using various methods, including remote controls, keypads, or other access control systems connected to the integrated dual-channel radio receiver.
4.1 자동 작동
- Press the designated button on your remote control or keypad to initiate gate movement.
- The gate will open or close to its programmed limit. A second press during movement will typically stop the gate. A third press will reverse its direction.
- The D-Track system continuously monitors torque, speed, and position, ensuring smooth and safe operation.
4.2 수동 해제
정전이나 고장이 발생한 경우, 게이트를 수동으로 작동할 수 있습니다.
- Locate the manual release knob on the opener unit.
- Insert the provided key (if applicable) and turn the knob to disengage the motor.
- 이제 문을 손으로 밀어서 열거나 닫을 수 있습니다.
- To re-engage the motor, turn the knob back to its original position and remove the key.
5. 유지관리
Regular maintenance ensures the longevity and reliable operation of your BFT ICARO Slide Gate Opener. Perform these checks periodically.
5.1 월별 점검
- 게이트 이동: Manually slide the gate to ensure it moves freely without excessive friction or binding.
- 안전 장치 : Test photocells and other safety sensors by obstructing their path during gate operation. The gate should stop or reverse.
- 장착 하드웨어: Inspect all mounting bolts and fasteners for tightness.
5.2 Bi-Annual Checks (Recommended by Qualified Technician)
- 매끄럽게 하기: Lubricate the gate wheels, bearings, and any moving parts of the gate itself. The opener's internal gears are typically self-lubricating.
- 전기 연결: Inspect all wiring for signs of wear, corrosion, or loose connections.
- 리미트 스위치: Verify the proper functioning and adjustment of the electromechanical limit switches.
- D-Track System: A technician can verify the optimal performance of the D-Track torque management system.
메모: Always disconnect power before performing any maintenance that requires opening the opener's casing.
6. 문제 해결
This section provides solutions to common issues you might encounter. For more complex problems, contact a qualified technician.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 문이 움직이지 않습니다. | No power; Safety device activated; Manual release engaged; Remote battery dead. | Check power supply and circuit breaker; Inspect safety sensors for obstructions; Disengage manual release; Replace remote battery. |
| 문이 예상치 못하게 멈춥니다. | Obstruction detected by safety device; Motor overload; Limit switch issue. | Clear obstructions; Check gate for free movement; Consult technician for motor or limit switch issues. |
| 리모컨이 작동하지 않습니다. | Dead battery; Out of range; Remote not programmed. | Replace battery; Move closer to the receiver; Refer to programming instructions for your remote. |
| 문이 부분적으로 열리거나 닫힙니다. | Limit switches misaligned; Obstruction. | Check for obstructions; Re-adjust limit switches (refer to setup section or technician). |
7. 기술 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | BFT-ICARO-SLIDE-GATE-OPENER-EM |
| 제어판 | LEO B CBB (incorporated) |
| 운영자 유형 | 뒤집을 수 없는 |
| 전원 공급 장치 | 230 V, 60 Hz single-phase |
| 흡수 된 힘 | 1마력(750W) |
| 열 보호 | 통합 |
| 피니언 피치 | 4mm(치수 25개) |
| Leaf Speed | 초당 7.9인치 |
| 출력 회전 속도 | 37 분당 |
| 충격 반응 | Electronic clutch with encoder (D-Track) |
| 리미트 스위치 | 전기기계 |
| 수동 릴리스 | Mechanical release with knob |
| 작동 주기 | 집중 사용 |
| 환경 조건 | 화씨 5도 ~ 화씨 140도(섭씨 -15도 ~ 60도) |
| 보호 정도 | IP24 |
| 작업자 무게 | 56파운드(25.4kg) |
| 사용 빈도 | Very intensive |
8. 보증 및 지원
8.1 보증 정보
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official BFT web해당 사이트에서 제공하는 보증 서비스를 이용하실 수 있습니다. 보증 범위는 일반적으로 구매일로부터 특정 기간 동안 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함을 포함합니다.
보증 청구를 위해 구매 증빙 서류를 보관하세요.
8.2 기술 지원
If you encounter issues that cannot be resolved using the troubleshooting guide, or require professional assistance, please contact your authorized BFT dealer or the manufacturer's technical support department.
제조업체: 비피에이치피(BFT)
Please have your model number (BFT-ICARO-SLIDE-GATE-OPENER-EM) and purchase date ready when contacting support.
