소개
This manual provides detailed instructions for the installation, operation, and maintenance of your Gladen RS-X-12 High Performance 12" Subwoofer. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product. Proper installation and care are crucial for the best audio experience and to prevent damage.
이미지: 앞면 view of the Gladen RS-X-12 High Performance 12 inch Subwoofer, showcasing its black cone, red stitching, and robust construction.
제품 특징
The Gladen RS-X-12 Subwoofer is engineered for high-performance audio reproduction, featuring robust components designed for durability and sound quality.
- Vented Die-Cast Basket: Provides structural rigidity and aids in cooling the voice coil.
- Black Nomex Spider: Ensures precise cone control and durability under high excursion.
- Paper Cone: Offers an optimal balance of stiffness and low mass for accurate sound reproduction.
- PP-Dust Cap: Protects the voice coil assembly from dust and debris.
- 12" (30 cm) Diameter: Standard size for powerful bass output.
- 750/500 Watt Power Handling: Capable of handling significant power for dynamic bass.
- 4 옴 임피던스: Compatible with a wide range of car audio amp정수기.
- 2.5" Voice Coil: Designed for high power handling and thermal stability.
- 이전 코일: Constructed from Aluminum for efficient heat dissipation.
- 둘러 싸다: Made of durable Foam for optimal cone movement.
설정 및 설치
Proper installation is critical for the performance and longevity of your subwoofer. Consult a professional installer if you are unsure about any steps.
물리적 차원
- 외경 : 317mm / 12.48인치
- Installation Diameter: 284mm / 11.18인치
- 설치 깊이: 148mm / 5.82인치
- 자석 직경: 185mm / 7.28인치
Recommended Enclosure Volumes
For optimal performance, the RS-X-12 subwoofer is designed to operate within specific enclosure volumes:
- 통풍 상자: 48 liters (approximately 1.7 cubic feet)
- 봉인된 상자: 32 liters (approximately 1.1 cubic feet)
Ensure the enclosure is constructed from sturdy material and is airtight (for sealed boxes) or properly ported (for vented boxes) according to design specifications.
배선
서브우퍼를 amplifier using appropriate gauge speaker wire. Ensure correct polarity (+ to + and - to -) to prevent phase issues and ensure proper sound reproduction. Refer to your amplifier's manual for specific wiring configurations and impedance matching.
Image: Technical diagram showing the Gladen RS-X-12 subwoofer's dimensions, detailed speaker specifications, and recommended sealed and vented box volumes.
작동 지침
설치가 완료되면 최적의 작동을 위해 다음 지침을 따르세요.
- 침입 기간: 서브우퍼를 고음량으로 작동하기 전에 약 10~20시간 동안 적당한 음량으로 청취하여 길들이기 기간을 갖도록 하십시오. 이렇게 하면 서스펜션 부품이 부드러워져 최적의 성능을 발휘할 수 있습니다.
- 이득 설정: 설정하다 amplifier gain correctly to match the output of your head unit. Incorrect gain settings can lead to distortion and potential damage to the subwoofer. Avoid setting the gain too high.
- 크로스오버 설정: 저역 통과 필터를 사용하세요 amplifier or head unit to send only low frequencies to the subwoofer. A typical crossover point for a 12-inch subwoofer is between 60 Hz and 100 Hz.
- 볼륨 조절: 볼륨은 항상 서서히 높이십시오. 잡음이 들리면 즉시 볼륨을 줄이십시오.
- 파워 핸들링: While the subwoofer has a high power rating, continuous operation at maximum power can lead to overheating. Monitor for signs of stress or excessive heat.
유지
정기적인 유지 관리는 서브우퍼의 수명과 성능을 보장하는 데 도움이 됩니다.
- 청소: 부드럽고 마른 천으로 콘과 주변부를 살살 닦아주세요. 강한 화학 약품이나 과도한 습기는 피하십시오.
- 점검: Periodically check the speaker terminals for secure connections and inspect the cone and surround for any signs of damage or wear.
- 환경: Ensure the subwoofer is installed in a location free from excessive moisture, direct sunlight, and extreme temperatures.
- 통풍: If installed in an enclosure, ensure adequate ventilation around the amp과열을 방지하는 lifier.
문제 해결
서브우퍼에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소리가 나지 않습니다 | 전원이 없다. amp증폭기; 느슨한 배선; amp앰프가 보호 모드에 있습니다. 입력 신호가 잘못되었습니다. | 확인하다 amplifier power, fuses, and ground connections. Verify all speaker and RCA cables are securely connected. Reset amplifier if in protect mode. Ensure head unit is sending an audio signal. |
| 왜곡된 소리 | Amplifier gain too high; incorrect crossover settings; damaged subwoofer. | 줄이다 amplifier gain. Adjust crossover frequency. Inspect subwoofer cone and surround for physical damage. |
| 약한 저음 | Incorrect phase; insufficient power; improper enclosure. | Check subwoofer phase setting (0 or 180 degrees). Ensure amplifier is providing adequate power. Verify enclosure volume and construction. |
| 과열 | Amplifier gain too high; inadequate ventilation; continuous high power usage. | 줄이다 amplifier gain. Ensure amplifier has proper airflow. Avoid prolonged operation at maximum volume. |
명세서
Detailed technical specifications for the Gladen RS-X-12 Subwoofer:
| 사양 | 값 |
|---|---|
| 모델명 | RS-X-12 |
| 스피커 유형 | Subwoofer, Surround Sound |
| 서브우퍼 직경 | 12 인치 (30cm) |
| Power (RMS/Max) | 500W / 750W(RMS) |
| 스피커 최대 출력 전력 | 1500와트(최대) |
| 공칭 임피던스 | 4옴 |
| DC 저항(Re) | 3.71옴 |
| 공진 주파수(Fs) | 31.40Hz |
| 음성 코일 직경 | 2.5인치 |
| 엑스맥스 | 14mm (XNUMXmm) |
| 이동 질량(Mms) | 149.97g |
| 유효 피스톤 면적(Sd) | 514cm² |
| Mechanical Resistance (Rms) | 6.54 킬로그램 / 초 |
| Compliance (Cms) | 0.17mm/N |
| 힘 계수(BL) | 14.37 |
| 등가 공기량(Vas) | 63.57dm³ |
| 제품 치수 | 14인치 깊이 x 9인치 너비 x 14인치 높이 |
| 품목 무게 | 18 파운드 |
| 장착 유형 | 플러시 마운트 |
| 방수 | 거짓 |
| 포함된 구성 요소 | RS-X-12 Subwoofer |
보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Gladen web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
제조업체: Gladen
For further assistance, you may contact Gladen customer service through their official channels.
