iHome iH402B Dual Charging Alarm Clock with USB Instruction Manual

소개

This manual provides instructions for the setup, operation, and maintenance of your iHome iH402B Dual Charging Alarm Clock. This device features dual alarms, a USB charging port, and a removable USB battery pack for portable power. Please read these instructions carefully before using your device.

제품 끝view

영상: The iHome iH402B alarm clock displaying 10:09 PM, with a smartphone and a tablet connected via USB cables for charging. The removable power pack is visible on the right side of the clock.

The iH402B is designed to provide reliable timekeeping and alarm functions, along with convenient charging capabilities for your mobile devices. It includes a main unit with a digital display, a built-in USB charging port, and a unique pop-out removable lithium-ion battery pack with its own USB port.

설정

1. 전원 연결

Connect the power adapter (not included, but required for primary power) to the DC jack on the back of the iH402B unit and then plug the adapter into a standard wall outlet. The unit will power on and the display will illuminate.

2. 배터리 백업

The iH402B requires 2 AA batteries (included) for battery backup. Install these batteries into the compartment located on the bottom of the unit. This backup ensures that time and alarm settings are maintained during a power outage.

3. 시간 설정

1. 를 누르고 계세요 시간 설정 button (refer to unit for exact location).
2. 사용하세요 + or - buttons to adjust the hour. Observe the PM indicator for correct AM/PM setting.
3. 를 누르세요 시간 설정 button again to confirm the hour and proceed to minute adjustment.
4. 사용하세요 + or - 버튼을 사용하여 분을 조정합니다.
5. 를 누르세요 시간 설정 마지막으로 버튼을 한 번 더 눌러 시간을 저장하고 시간 설정 모드를 종료하세요.

4. Daylight Saving Time (DST) Switch

위치 일광 절약 시간제 switch on the back of the unit. Slide the switch to the appropriate position (DST or Standard Time) to instantly adjust the clock for seasonal time changes.

작동 지침

1. 알람 설정(알람 1 및 알람 2)

The iH402B features two independent alarms. Follow these steps for each alarm:

1. 를 누르고 계세요 알람 1 or 알람 2 알람 시간이 디스플레이에 깜빡일 때까지 버튼을 누르세요.
2. 사용하세요 + or - buttons to adjust the desired alarm hour. Ensure the AM/PM indicator is correct.
3. 해당되는 것을 누르세요 경보 button again to confirm the hour and proceed to minute adjustment.
4. 사용하세요 + or - 원하는 알람 시간을 분 단위로 조절할 수 있는 버튼이 있습니다.
5. 를 누르세요 경보 button one last time to save the alarm time. The alarm indicator will light up, confirming the alarm is active.
6. 작동 중인 알람을 끄려면 해당 버튼을 누르십시오. 경보 button once. The alarm indicator will turn off.

An alarm volume switch (High/Low) is located on the back of the unit to adjust the buzzer volume.

2. 스누즈 기능

알람이 울리면 누르세요 선잠 button (typically a large button on top of the unit) to temporarily silence the alarm. The alarm will sound again after a preset interval (usually 9 minutes).

3. 디스플레이 밝기

디스플레이 밝기를 조절할 수 있습니다. 주차 or 명도 button (refer to unit for exact location). Press it repeatedly to cycle through various brightness levels, including an option to turn the display off entirely.

4. USB 충전

The iH402B offers two ways to charge your mobile devices:

• 내장 USB 포트: Connect your device's USB charging cable to the USB port located on the side or back of the main unit.
• Removable USB Battery Pack: The unit includes a pop-out lithium-ion battery pack with its own USB port. To use it, press the release button (typically on the back) to eject the pack. Connect your device's USB charging cable to the port on the battery pack. To recharge the battery pack, reinsert it into the main unit.

영상: 더 가까이 view of the iHome iH402B, highlighting the USB charging capabilities. A smartphone is connected to the built-in USB port, and a tablet is connected to the removable power pack, which is inserted into the alarm clock.

유지

1. 청소

Wipe the unit with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish.

2. 배터리 교체 (백업)

If the display flickers or settings are lost during a power interruption, the AA backup batteries may need replacement. Open the battery compartment on the bottom of the unit, remove the old batteries, and insert two new AA batteries, observing correct polarity.

문제 해결

• 장치의 전원이 켜지지 않습니다. Ensure the power adapter is securely plugged into both the unit and a working wall outlet. Check the power source.
• 알람이 울리지 않습니다: Verify that the alarm is set and activated (alarm indicator lit). Check the alarm volume switch on the back of the unit.
• USB 충전이 작동하지 않습니다. Ensure the unit is powered on. Check the USB cable connection to both the alarm clock/battery pack and your device. Some devices may require more power than the removable pack can provide for a full charge.
• Time/settings lost during power outage: Replace the AA backup batteries.
• Display is too dim or off: Adjust the display brightness using the dedicated button.

명세서

보증 및 지원

보증 정보 및 기술 지원에 대해서는 구매 시 동봉된 설명서를 참조하시거나 iHome 공식 웹사이트를 방문하십시오. web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.