1. 제품 오버view
The Fantech EDF7 Electronic Multifunction Dehumidistat is designed for use with all Fantech HRV/ERV units, with the exception of the SH/VH 704 models. This advanced control offers three distinct modes of operation: ventilation, recirculation, and standby, providing comprehensive air quality management for your space.
Key features of the EDF7 Dehumidistat include:
- Adjustable Relative Humidity (RH) set point for precise control.
- User-selectable fan speeds: Low, Medium, Normal, and a 20 minutes per hour cycle.
- A dedicated Summer setting to deactivate dehumidification when not needed.
- An LED backlit screen for clear visibility of settings and readings.
- Continuous display of indoor Relative Humidity.
그림 1: 전면 view of the Fantech EDF7 Electronic Multifunction Dehumidistat. The control panel features an upper section for 'OVERRIDE CONTROLS' including humidity adjustment buttons and a digital display for humidity. The lower section, 'MODE CONTROLS', includes buttons for Power, Modes, Mode Speed, and Cycle, along with indicators for filter status and various operational states.
2. 설치 및 설정
The Fantech EDF7 Dehumidistat is designed for wall-mounted installation and requires connection to a compatible Fantech HRV/ERV unit. For optimal performance and safety, it is highly recommended that installation be performed by a qualified HVAC professional or a certified electrician.
2.1 설치 전 체크리스트
- Ensure power to the HRV/ERV unit is disconnected at the circuit breaker before beginning installation.
- Verify compatibility with your Fantech HRV/ERV model (not compatible with SH/VH 704).
- 필요한 도구를 준비하세요: 드라이버, 전선 피복 벗기기 도구, 드릴(새로운 위치에 설치하는 경우).
2.2 배선 지침
Refer to the wiring diagram provided with your Fantech HRV/ERV unit and the EDF7 packaging for specific connection points. Generally, the dehumidistat connects to the low-voltage control terminals of the HRV/ERV unit. Ensure all connections are secure and follow local electrical codes.
메모: Incorrect wiring can damage the unit or pose a safety hazard. If unsure, consult a professional.
2.3 초기 전원 켜기
After installation and wiring are complete, restore power to the HRV/ERV unit. The EDF7's LED backlit screen should illuminate, displaying the current indoor relative humidity.
3. 사용 설명서
The EDF7 Dehumidistat provides intuitive control over your ventilation system. Familiarize yourself with the control panel as shown in Figure 1.
3.1 전원 켜기/끄기
- 위치 힘 button on the lower left of the control panel.
- 를 누르세요 힘 button to toggle the unit on or off. When on, the screen will display the current humidity.
3.2 작동 모드 선택
The EDF7 offers three primary operating modes:
- 환기 모드 : Continuously exchanges indoor air with fresh outdoor air.
- 재순환 모드: Filters and circulates indoor air without introducing outdoor air.
- 대기 모드: The unit is idle, only activating if specific conditions (e.g., high humidity) trigger an override.
To change modes, press the 모드 button (located next to the Power button) repeatedly until the desired mode indicator illuminates on the display.
3.3 Adjusting Humidity Set Point
The dehumidistat allows you to set a desired relative humidity level. When the indoor humidity exceeds this set point, the unit will activate to reduce humidity.
- In the upper section of the control panel, locate the 습기 display and the adjacent up (▲) 및 아래 (▼) arrow buttons.
- Press the up or down arrow buttons to increase or decrease the desired humidity set point. The new setting will be displayed temporarily.
3.4 팬 속도 제어
The EDF7 offers four fan speed settings:
- 낮은: Minimum airflow, quiet operation.
- 중간: Moderate airflow.
- 정상: Standard operating airflow.
- 20 Minutes per Hour: Operates for 20 minutes within each hour, then pauses.
To adjust the fan speed, press the 모드 속도 button (located in the lower section) repeatedly until the indicator for the desired speed is lit.
3.5 Summer Setting
During summer months when dehumidification is not required, you can activate the Summer setting to prevent the unit from operating based on humidity levels.
- Consult your HRV/ERV unit's manual for specific instructions on activating the Summer setting via the EDF7, as this may involve a combination of button presses or a dedicated setting within the 'MODES' cycle.
- When active, the dehumidification function will be deactivated, saving energy.
3.6 Override Controls
The upper section of the control panel features override controls, allowing for temporary adjustments or activation of specific functions regardless of the current mode or humidity settings. These typically include timed boosts or specific cycle activations. Refer to your HRV/ERV unit's comprehensive manual for detailed use of these override functions.
4. 유지관리
Regular maintenance ensures the longevity and optimal performance of your Fantech EDF7 Dehumidistat and connected HRV/ERV system.
4.1 Cleaning the Dehumidistat
- 제어판 표면을 부드러운 천으로 닦으세요.amp 옷감.
- Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the display or internal components.
- Ensure the unit is powered off before cleaning.
4.2 Filter Maintenance (HRV/ERV Unit)
The EDF7 control panel includes a 필터 indicator (as seen in Figure 1). This light illuminates to remind you to check and clean or replace the filters in your connected Fantech HRV/ERV unit. Refer to your HRV/ERV unit's manual for specific filter maintenance procedures and schedules.
중요한: Neglecting filter maintenance can reduce system efficiency and air quality.
5. 문제 해결
If you experience issues with your Fantech EDF7 Dehumidistat, try the following common troubleshooting steps. For more complex issues, consult a qualified technician.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Dehumidistat display is off. | No power to the unit or HRV/ERV. | Check the circuit breaker for the HRV/ERV unit. Ensure the dehumidistat is properly wired. Press the 힘 단추. |
| Unit not responding to humidity settings. | Summer setting active; incorrect humidity set point; HRV/ERV unit malfunction. | Deactivate Summer setting. Adjust humidity set point lower than current indoor humidity. Consult HRV/ERV manual for troubleshooting its operation. |
| 팬 속도가 변하지 않습니다. | Incorrect button press; HRV/ERV unit issue. | 당신이 누르고 있는지 확인하십시오 모드 속도 button. Check HRV/ERV unit for errors or blockages. |
| FILTER indicator light is on. | HRV/ERV filters are dirty or need replacement. | Clean or replace the filters in your Fantech HRV/ERV unit as per its manual. Reset the filter indicator if applicable (refer to HRV/ERV manual). |
6. 제품 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | EDF7 |
| 상표 | 팬 테크 |
| 호환성 | All Fantech HRV/ERV units (except SH/VH 704) |
| 작동 모드 | Ventilation, Recirculation, Standby |
| 속도의 수 | 4 (Low, Medium, Normal, 20 min/hr) |
| 표시하다 | LED Backlit, displays Indoor Relative Humidity |
| 색상 | 하얀색 |
| 포함된 구성 요소 | 제어 장치 |
| 패키지 크기 | 5.51 x 4.41 x 1.65 인치 |
| 품목 무게 | 4.94 온스 |
| 한국어: | 650737448837 |
7. 보증 정보
Specific warranty terms and conditions for the Fantech EDF7 Electronic Multifunction Dehumidistat are provided by the manufacturer. Please refer to the warranty card included with your product packaging or visit the official Fantech web자세한 보증 범위, 기간 및 청구 절차는 해당 사이트를 참조하십시오.
메모: 보증 청구를 위해 구매 증빙 자료를 보관하십시오.
8. 고객 지원
For technical assistance, replacement parts, or further inquiries regarding your Fantech EDF7 Dehumidistat, please contact Fantech customer support.
- 팬테크 공식 Web대지: www.fantech.net (Please note: This is a generic placeholder for Fantech's website, actual URL may vary. Refer to product packaging for precise contact information.)
- 연락처 정보: Refer to the Fantech website or product documentation for phone numbers and email addresses.
When contacting support, please have your product model number (EDF7) and purchase date available.
