1. 서론
This manual provides essential instructions for the safe and efficient operation of your Intermec PB32A10004000 Series PB32 3-inch Rugged Mobile Direct Thermal Label-Receipt Printer. Please read this manual thoroughly before using the device and retain it for future reference.
The Intermec PB32 is a rugged mobile printer designed for demanding retail and warehouse environments. It offers fast label printing and seamless integration with Intermec mobile computers and other mobile devices.
2. 안전 정보
- Use only Intermec-approved power adapters and batteries.
- Do not expose the printer to extreme temperatures, moisture, or direct sunlight.
- Avoid dropping or subjecting the printer to severe impacts.
- 프린터를 인화성 물질로부터 멀리 두십시오.
- Do not attempt to disassemble or repair the printer yourself. Refer to qualified service personnel.
- 작동 및 충전 중에는 적절한 환기가 이루어지도록 하십시오.
3. 패키지 내용
포장을 개봉하신 후 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오. 일반적인 포장 구성품은 다음과 같습니다.
- Intermec PB32A10004000 Mobile Printer
- 충전식 배터리 팩
- 전원 어댑터/충전기
- 빠른 시작 가이드(또는 유사한 문서)
- Roll of Thermal Label/Receipt Media (may vary by region/bundle)
Image 1: The product packaging box for the Intermec PB32A10004000 printer. The box is white with the brand name "Intermec" and the model number "PB32A10004000" clearly visible on its side.
4. 설정
4.1. 배터리 충전
- Insert the rechargeable battery pack into the designated battery compartment of the printer. Ensure it clicks securely into place.
- 전원 어댑터를 프린터의 충전 포트에 연결하세요.
- 전원 어댑터를 표준 전기 콘센트에 연결하십시오.
- Allow the printer to charge fully before initial use. The charging indicator light will typically change color or turn off when charging is complete.
4.2. Loading Print Media
- Open the media cover latch on the printer.
- Place the roll of thermal labels or receipt paper into the media compartment. Ensure the print side of the media is facing the print head.
- Pull a small length of media out past the print head and align it with the media guides.
- Close the media cover securely until it latches.
4.3. 호스트 장치에 연결하기
The PB32 printer supports Bluetooth, RS232 Serial, and USB connectivity.
4.3.1. 블루투스 연결
- Ensure the printer is powered on and Bluetooth is enabled (refer to printer's display or indicator lights).
- On your host device (e.g., smartphone, mobile computer), navigate to Bluetooth settings and search for available devices.
- Select "Intermec PB32" (or similar name) from the list.
- Enter the pairing PIN if prompted (default PIN is often 0000 or 1234, refer to specific device documentation).
- Once paired, the printer is ready for wireless printing.
4.3.2. USB 연결
- Connect one end of a compatible USB cable to the printer's USB port.
- Connect the other end of the USB cable to your host device (e.g., computer, mobile computer).
- Install necessary printer drivers on your host device if prompted.
4.3.3. RS232 Serial Connection
- Connect a compatible RS232 serial cable to the printer's serial port.
- Connect the other end of the serial cable to your host device.
- Configure the serial communication settings (baud rate, data bits, parity, stop bits) on both the printer and the host device to match.
5. 사용 설명서
5.1. 전원 켜기 / 끄기
- 전원을 켜려면 표시등이 켜질 때까지 전원 버튼을 길게 누르십시오.
- 전원을 끄려면 표시등이 꺼질 때까지 전원 버튼을 길게 누르십시오.
5.2. 기본 인쇄
- Ensure the printer is powered on, has sufficient battery charge, and media is loaded correctly.
- Verify that the printer is connected to your host device via Bluetooth, USB, or RS232.
- From your application on the host device, select the print function.
- Choose the Intermec PB32 printer from the list of available printers.
- Adjust print settings (e.g., label format, quantity) as needed within your application.
- Initiate the print job. The printer will begin printing labels or receipts.
5.3. 표시등
Refer to the printer's specific indicator lights for status information (e.g., power, battery, error, Bluetooth connection). Consult the quick start guide or full product documentation for detailed explanations of each light's behavior.
6. 유지관리
6.1. 프린터 청소
- Power off the printer and disconnect it from any power source before cleaning.
- 부드럽고 보풀이 없는 천을 살짝 사용하십시오. dampened with isopropyl alcohol to clean the print head. Allow it to dry completely before use.
- 프린터 외부를 부드러운 천으로 닦으세요.amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
- Regularly remove any dust or debris from the media compartment.
6.2. 배터리 관리
- 배터리 수명을 극대화하려면 배터리를 자주 완전히 방전하지 마세요.
- 장기간 사용하지 않을 때는 프린터와 배터리를 서늘하고 건조한 곳에 보관하십시오.
- If the printer will not be used for a long time, charge the battery to approximately 50% before storage.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 프린터의 전원이 켜지지 않습니다. | Low or depleted battery; faulty power adapter. | Charge the battery. Ensure the power adapter is correctly connected and functional. |
| 출력물이 없습니다. | No media loaded; media loaded incorrectly; printer not connected; print head dirty. | Load media correctly. Verify connection to host device. Clean the print head. |
| 인쇄 품질이 좋지 않습니다. | Dirty print head; incorrect media type; low battery. | Clean the print head. Ensure you are using compatible thermal media. Charge the battery. |
| 블루투스 연결 문제. | Printer not in pairing mode; incorrect PIN; interference. | Ensure printer Bluetooth is enabled and discoverable. Re-enter PIN. Move closer to the printer. |
If the problem persists after attempting these solutions, contact Intermec customer support or your service provider.
8. 사양
| 모델명 | PB32A10004000 |
| 상표 | 인터멕 |
| 인쇄 기술 | 직접 열 |
| 프린터 출력 | 단색화 |
| 연결 기술 | Bluetooth, RS232 Serial, USB |
| 특징 | 블루투스 |
| 인쇄 매체 | 라벨 |
| 호환 장치 | Smartphones, Intermec Mobile Computers |
| 품목 무게 | 29.2 온스(약 0.83kg) |
| 패키지 크기 | 30 x 25 x 10인치(약 76.2 x 63.5 x 25.4cm) |
| 제조업체 | 인터멕 |
| 첫 번째 이용 가능 | 5년 2016월 XNUMX일 |
9. 보증 및 지원
For warranty information, please refer to the warranty card included with your product or visit the official Intermec web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
For technical support, service, or to purchase accessories, please contact Intermec customer support through their official channels. Contact details can typically be found on the manufacturer's web사이트 또는 제품 포장.
Online resources, including drivers, firmware updates, and additional documentation, may be available on the Intermec support portal.
