소개
Thank you for choosing the Nitecore EF1W Explosion-Proof Flashlight. This manual provides detailed instructions for the safe and effective use of your device. Please read this manual thoroughly before operation to ensure optimal performance and safety.
중요한 안전 정보
⚠ WARNING: This is an Explosion-Proof Flashlight. Adhere strictly to all safety guidelines.
- 배터리 안전: Always ensure batteries are inserted with correct polarity. Replace batteries only in a secured, non-hazardous area to maintain explosion-proof integrity.
- Explosion-Proof Certification: The EF1W is certified for explosion-proof environments. Refer to the product's specific certification details (e.g., "Serial No:2015012ル Certificate No.Ch") for compliance information. Do not modify the flashlight in any way, as this will void its explosion-proof rating.
- 열: The flashlight may generate heat during prolonged use. Handle with care.
- 눈 보호: 빛을 눈에 직접 비추지 마십시오.
패키지 내용
포장을 풀 때 아래 나열된 품목이 모두 들어 있는지 확인하세요.
- Nitecore EF1W Flashlight
- 고품질 홀스터
- 매는 밧줄
- 사용 설명서 (본 문서)
설정
배터리 설치
The Nitecore EF1W operates on one 18650 Li-ion battery or two CR123/RCR123 batteries. Ensure batteries are fully charged before first use.
- 손전등의 꼬리 캡을 시계 반대 방향으로 돌려서 풉니다.
- Insert the battery(ies) with the positive (+) terminal facing towards the head of the flashlight.
- 꼬리 캡을 시계 방향으로 돌려 단단히 조여질 때까지 다시 조입니다.
메모: Always use high-quality, reputable batteries to ensure optimal performance and safety, especially in explosion-proof environments. Improper battery installation can damage the device or pose a safety risk.
작동 지침
켜기/끄기
To turn the flashlight on, rotate the magnetic control ring (located near the head of the flashlight) from the "0" position to "1" or "2". To turn it off, rotate the ring back to the "0" position.
모드 선택
The Nitecore EF1W features a magnetic control ring for seamless mode selection. Rotate the ring to switch between different brightness levels:
- Position "0": 끄다
- Position "1": Low/Medium Brightness Mode
- Position "2": High Brightness Mode (up to 830 lumens)
The magnetic control ring allows for quick and precise adjustment of light output, even with gloves on.
유지
- 청소: 깨끗하고 부드러운 천으로 손전등을 닦으세요. 잘 지워지지 않는 오염에는 약간 묽은 천을 사용하세요.amp 천. 강한 화학 물질이나 연마재를 사용하지 마십시오.
- 매끄럽게 하기: 방수 기능과 원활한 작동을 유지하려면 주기적으로 O링과 나사산에 실리콘 그리스를 도포하십시오.
- 배터리 관리 : 장기간 손전등을 사용하지 않을 경우 누액 및 손상을 방지하기 위해 배터리를 제거하십시오. 배터리는 서늘하고 건조한 곳에 보관하십시오.
- 저장: 손전등은 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 손전등이 켜지지 않습니다. |
|
|
| 조명 출력이 어둡거나 깜박입니다. |
|
|
| Magnetic control ring is stiff. |
|
|
명세서
| 모델 | EF1W |
| 상표 | Nitecore |
| 최대 출력 | 830루멘 |
| 배터리 유형 | 1x 18650 or 2x CR123/RCR123 |
| 전원 | 배터리 구동 |
| 색상 | White (Flashlight body is black) |
| 품목 무게 | 454g |
| 품목 치수(LxWxH) | 35.6 x 15.2 x 15.2 Centimeters (Note: This dimension seems unusually large for a flashlight and might refer to packaging. Actual flashlight dimensions are typically smaller.) |
| 포함된 구성 요소 | Quality holster, lanyard |
| 제조업체 | Light Junction |
| ASIN | B01CDZPVVW |
보증 및 지원
보증 정보
Nitecore products are typically covered by a warranty against defects in materials and workmanship. For specific warranty terms and conditions applicable to your EF1W flashlight, please refer to the warranty card included with your purchase or visit the official Nitecore web대지.
고객 지원
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Nitecore customer support through their official website or your local distributor. Provide your product model (EF1W) and purchase details for efficient service.
