SOMMER 4079V000

SOMMER 4079V000 무선 키패드 사용 설명서

For Direct Drive Garage Door Openers

제품 끝view

The SOMMER 4079V000 Wireless Keypad is designed for secure and convenient access to your garage. This 12-channel keypad operates on a 310 MHz rolling code frequency, ensuring enhanced security. It is capable of managing up to 10 different garage doors, each with its own unique code ranging from 1 to 9 digits in length.

주요 특징:

  • 12-Channel Wireless Keypad
  • 310 MHz Rolling Code Technology
  • Capable of operating up to 10 garage doors
  • Supports codes from 1 to 9 digits in length
SOMMER 4079V000 Wireless Keypad for Garage Door Opener
Image showing the SOMMER 4079V000 wireless keypad, typically black with silver accents, featuring a numeric keypad and function buttons.

설정 및 설치

1. 배터리 설치

The keypad requires one CR123A battery, which is included. To install the battery:

  1. 키패드 뒷면에 있는 배터리함 덮개를 찾으세요.
  2. 덮개를 제거하세요.
  3. CR123A 배터리를 삽입할 때 극성(+/-)을 정확히 확인하십시오.
  4. 배터리함 덮개를 단단히 다시 닫으십시오.

2. 키패드 장착

Choose a suitable location outside your garage for mounting. The keypad should be installed at least 5 feet (1.5 meters) above the ground, in a position that is easily accessible but away from any moving parts of the garage door. Use the provided holder and fasteners to securely attach the keypad to the desired surface.

3. 키패드 프로그래밍

To program the keypad to your SOMMER garage door opener:

  1. Locate the 'Learn' or 'Program' button on your SOMMER garage door opener unit. The exact location may vary by model.
  2. Press and immediately release the 'Learn' or 'Program' button. The indicator light on the opener should illuminate or flash, signaling it is ready to learn a new code. You typically have 30 seconds to complete the next step.
  3. On the 4079V000 keypad, enter your desired 1-9 digit access code.
  4. Press the 'Enter' button on the keypad.
  5. The garage door opener's light should flash or click, indicating that the code has been successfully programmed.
  6. Test the programmed code by entering it on the keypad and pressing 'Enter'. The garage door should activate.

작동 지침

To operate your garage door using the SOMMER 4079V000 Wireless Keypad:

  1. Enter your previously programmed access code on the keypad.
  2. 'Enter' 버튼을 누르세요.
  3. The garage door will open or close.

Changing Your Access Code

To change an existing access code, you will need to reprogram the keypad following the 'Programming the Keypad' steps in the Setup section. This will overwrite the old code with the new one.

유지

배터리 교체

When the keypad's backlight dims, or if the keypad becomes unresponsive, it is likely time to replace the CR123A battery. Follow the battery installation steps outlined in the 'Setup and Installation' section.

청소

Clean the surface of the keypad with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the keypad's finish or internal components.

문제 해결

  • 키패드가 응답하지 않습니다.
    Check the battery level. If the backlight is dim or non-existent, replace the CR123A battery. Ensure the keypad is within effective range of the garage door opener. If issues persist, try reprogramming the keypad to the opener.
  • Garage door not opening/closing:
    Verify that the access code is entered correctly. Ensure the garage door opener itself is powered and functioning. Check for any physical obstructions preventing the door from moving.
  • 호환성 문제:
    The SOMMER 4079V000 keypad operates on a 310 MHz frequency. It is crucial to ensure that your SOMMER garage door opener is compatible with this specific frequency. Newer SOMMER garage door opener models may utilize different frequencies (e.g., 922 MHz) and will not be compatible with this 4079V000 keypad. Always confirm frequency compatibility before purchase or troubleshooting.

명세서

제조업체섬머
모델 번호4079V000
품목 무게4.8 온스
제품 치수1.4 x 1.9 x 6.3 인치
배터리1 CR123A(포함)
빈도310MHz 롤링 코드
코드 길이1~9자리
색상블랙/실버

보증 정보

The SOMMER 4079V000 Wireless Keypad is covered by a 2-year warranty from the original date of purchase. Please retain your proof of purchase, such as a receipt or order confirmation, as it will be required for any warranty claims. This warranty covers defects in materials and workmanship under normal use.

고객 지원

For additional assistance, technical support, or inquiries regarding your SOMMER 4079V000 Wireless Keypad, please visit the official SOMMER website or contact SOMMER customer service directly. When contacting support, please have your product model number (4079V000) readily available to expedite service.

관련 문서 - 4079V000

사전view 빠른 시작: Sommer Telecody 키패드에서 CarTeck Drive 600 오프너 프로그래밍 가이드로
CarTeck Drive 600 차고 문 오프너용 Sommer Telecody 키패드를 프로그래밍하는 방법에 대한 간략한 가이드로, 단일 및 다중 문 설정에 대한 단계별 지침이 포함되어 있습니다.
사전view Sommer Telecody Wireless Keypad Installation and Operation Manual
Comprehensive guide to installing, programming, and operating the Sommer Telecody wireless keypad for garage door openers. Covers features, troubleshooting, and safety instructions.
사전view SOMMER 트위스트 200 E 게이트 오프너 매뉴얼
SOMMER twist 200 E 게이트 오프너 시스템에 대한 포괄적인 설치, 작동 및 유지 관리 매뉴얼로, 자세한 지침과 안전 정보를 제공합니다.
사전view SOMMER 리모컨 프로그래밍 가이드
SOMMER 4020, 4026, 4031, APERTO TX02 및 APERTO TX03 리모컨을 수신기 장치와 함께 프로그래밍하는 단계별 가이드입니다.
사전view SOMMER Telecody+/Courier 무선 키패드 사용 설명서
SOMMER Telecody+/Courier 무선 키패드 사용 설명서에는 기술 사양, 안전 지침, 작동, 프로그래밍 및 배터리 교체에 대한 자세한 내용이 설명되어 있습니다.
사전view SOMMER ENTRAsys+ RX Funkempfänger 설치 및 프로그래밍 핸드북
Dieses Handbuch bietet Detaillierte Anleitungen zur Installation, Verdrahtung und Programmierung des SOMMER ENTRAsys+ RX Funkempfängers, einer Komponte für sichere Zugangskontrollsysteme für Türen.