MXR 서브 머신 퍼즈 M225 사용 설명서

1. 서론

The MXR Sub Machine Fuzz (Model M225) is a versatile guitar effects pedal designed to deliver a wide range of fuzz tones combined with a growling sub-octave circuit. Building on the circuitry of the La Machine Fuzz, this pedal offers extensive sonic exploration for guitarists seeking unique and powerful sounds. Its intuitive controls allow for precise blending of fuzz and sub-octave signals, along with an electrifying octave-up mode and flexible signal routing options.

2. 설정

Before connecting your MXR Sub Machine Fuzz, ensure all other equipment is powered off to prevent potential damage.

1. 힘: The M225 operates on a 9-volt power supply (not included) or a 9-volt battery. Connect a standard 9V DC adapter (center-negative) to the power jack on the rear of the pedal. If using a battery, remove the bottom plate to access the battery compartment.
2. 입력 연결: 표준 1/4인치 악기 케이블을 사용하여 기타를 페달 오른쪽의 INPUT 잭에 연결하십시오.
3. 출력 연결: 페달 왼쪽의 OUTPUT 잭을 페달에 연결합니다. amp표준 1/4인치 악기 케이블을 사용하여 앰프 입력단자 또는 신호 체인의 다음 페달에 연결하십시오.

3. 작동 제어

The MXR Sub Machine Fuzz features a straightforward control layout for easy tone shaping.

• 볼륨 노브: 효과의 전반적인 출력 레벨을 제어합니다.
• 톤 노브: Shapes the tonal character of the fuzz, from dark and thick to bright and cutting.
• 퍼즈 노브: Adjusts the intensity and saturation of the fuzz effect.
• SUB OCTAVE Knob: Controls the output level of the sub-octave signal. Turn clockwise for more sub-octave.
• OCTAVE Switch: Toggles the fuzz signal into an electrifying octave-up mode when engaged.
• SERIES Switch: Selects the routing of the sub-octave signal. In Series mode, the sub-octave signal runs directly into the fuzz circuit for subterranean saturation. In Parallel mode, the sub-octave signal runs alongside the fuzz for a split-channel effect.
• 풋스위치: Engages or bypasses the effect. The pedal features true bypass switching, ensuring your dry signal remains unaffected when the pedal is off.

4. Sound Exploration & Usage Tips

The MXR Sub Machine Fuzz offers a wide tonal palette. Experiment with the controls to discover your preferred sounds:

• 빈tage Fuzz: Start with the SUB OCTAVE knob fully counter-clockwise (off) and adjust FUZZ and TONE to dial in classic fuzz tones. Engage the OCTAVE switch for searing octave-up fuzz.
• Subterranean Saturation: Engage the SERIES switch and gradually increase the SUB OCTAVE knob. This routes the sub-octave directly into the fuzz, creating a thick, heavy, and saturated sound.
• Split Channel Effect: Disengage the SERIES switch and blend the SUB OCTAVE with your fuzz tone. This creates a distinct, layered sound where the sub-octave retains more clarity alongside the fuzz.
• Sub-Octave Only: Turn the FUZZ knob fully counter-clockwise (off) and adjust the SUB OCTAVE knob for a clean sub-octave effect.

5. 유지관리

To ensure the longevity and optimal performance of your MXR Sub Machine Fuzz, follow these maintenance guidelines:

• 청소: 페달을 부드럽고 마른 천으로 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
• 배터리 교체: If using a 9-volt battery, replace it when the LED indicator dims or the sound quality degrades. To replace, remove the four screws from the bottom plate of the pedal. Carefully lift the plate and disconnect the old battery. Connect a new 9-volt battery, ensuring correct polarity, and reattach the bottom plate.
• 저장: 페달을 사용하지 않을 때는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.

6. 문제 해결

If you encounter issues with your MXR Sub Machine Fuzz, try the following basic troubleshooting steps:

• 소리 없음: Check all cable connections. Ensure the power supply is correctly connected and functioning, or that the battery is fresh and properly installed. Verify that your guitar and amplifier가 올바르게 작동하고 있습니다.
• 원하지 않는 소음: Ensure all cables are in good condition and properly shielded. Try using a different power supply to rule out noise from the adapter. Check for ground loops if using multiple pedals.
• 효과가 나타나지 않음: Ensure the footswitch is fully depressed. If using a battery, check its charge.

7. 사양

8. 상자 안에 무엇이 들어있나요?

• MXR M225 Sub Machine Octave Fuzz Pedal