소개
Thank you for choosing the Zacro LCD Digital Aquarium Thermometer. This device is designed to provide accurate and reliable water temperature readings for your aquarium, fish tank, or terrarium. Please read this manual thoroughly before use to ensure proper operation and longevity of your product.
안전 정보
- Ensure the thermometer unit (LCD display) itself is not submerged in water. Only the probe is designed for submersion.
- 배터리는 어린이의 손이 닿지 않는 곳에 보관하십시오. 삼켰을 경우 즉시 의사의 진료를 받으십시오.
- Do not expose the thermometer to extreme temperatures outside its operating range (-10°C to +50°C).
- Handle the probe and cable with care to prevent damage.
- Always turn off the device before performing any maintenance or battery replacement.
패키지 내용
- 1 x Zacro Digital Aquarium Thermometer
- 1 x LR44 Button Cell Battery (pre-installed or included separately)
- 1 x Suction Cup for probe attachment
- 1 x 사용자 매뉴얼(이 문서)
제품 특징
- 정확한 온도 측정: Provides readings to within 0.1 degree Celsius/Fahrenheit.
- 광범위한 온도 범위: Measures from -50°C to +70°C (-58°F to +158°F).
- 명확한 LCD 디스플레이: Large, easy-to-read digital display for quick temperature checks.
- Submersible Probe: Designed for direct immersion in water for precise readings.
- °C/°F 전환 가능: 섭씨와 화씨 단위를 간편하게 전환할 수 있습니다.
- 컴팩트한 디자인: Discrete size for minimal visual impact on your setup.
- 흡입 컵: For secure placement of the probe within the tank.
- 에너지 효율성: 배터리 수명이 길다.
명세서
| 모델 번호 | ZDT1-AUX-1 |
| 온도 범위 | -50°C ~ +70°C (-58°F ~ +158°F) |
| 작동 온도 | -10°C ~ +50°C(14°F ~ 122°F) |
| 정확성 | ±1°C (±2°F) |
| 디스플레이 유형 | 액정표시장치 |
| 전원 | 1 x LR44 Button Cell Battery |
| 제품 치수 | 3.6 x 3.2 x 0.6인치(9.1 x 8.1 x 1.5cm) |
| 프로브 케이블 길이 | 약 25cm(63인치) |
| 재료 | 플라스틱 |
설정 및 설치
- 배터리 삽입: Open the battery compartment on the back of the thermometer unit. Insert one LR44 button cell battery, ensuring correct polarity (+/-). Close the compartment securely.
Note: The battery may already be pre-installed. Remove any protective tab if present.
- Position the Display Unit: Place the main LCD display unit outside your aquarium or terrarium. It can be attached to the glass using a suction cup (not included for the main unit, typically placed on the rim or stand) or simply rested on a flat surface.
Image: The Zacro LCD Digital Aquarium Thermometer showing the main unit, probe, and suction cup. - Install the Probe: Attach the small suction cup to the temperature probe. Submerge the probe into the water of your aquarium or terrarium. Ensure the probe is fully immersed but the main display unit remains outside the water. Position the probe in an area where water circulation is good for accurate readings.
Image: Visual guide showing the installation of the thermometer: placing the monitor outside the tank and submerging the probe inside. 
Image: A close-up of the high accuracy probe submerged in an aquarium, illustrating its function. - 전원 켜기: Press the "PWR" button on the front of the thermometer to turn it on. The current temperature will be displayed on the LCD screen.
설치 비디오 가이드
Video: A short demonstration showing how to install the Zacro Digital Water Thermometer in an aquarium, including placing the display unit and submerging the probe.
작업
- 전원 켜기/끄기: Press the "PWR" button once to turn the thermometer on. To turn it off, press and hold the "PWR" button for approximately 3 seconds.
- 온도 단위 전환: Press the "°C/°F" button (located below the display) to toggle between Celsius and Fahrenheit temperature readings.
Image: Close-up of the thermometer displaying temperature in Celsius and Fahrenheit, highlighting the switch button. - 온도 측정: The large LCD display will continuously show the current water temperature.
유지
- 청소: Wipe the display unit with a soft, dry cloth. The probe can be gently cleaned with a soft brush or cloth if algae or debris accumulates. Do not use abrasive cleaners or solvents.
- 배터리 교체: When the display becomes dim or stops working, it's time to replace the LR44 button cell battery. Open the battery compartment, remove the old battery, and insert a new one with the correct polarity.
- 저장: If not in use for an extended period, remove the battery to prevent leakage and store the thermometer in a cool, dry place.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 없거나 어둡습니다 | 배터리 방전 또는 배터리 잔량 부족; 배터리 설치 오류. | LR44 배터리를 교체할 때 극성을 올바르게 맞춰주세요. |
| 부정확한 온도 측정 | Probe not fully submerged; probe placed in an area with poor water circulation; damaged probe. | Ensure probe is fully submerged and in a well-circulated area. Check for visible damage to the probe or cable. Compare with another reliable thermometer. |
| 디스플레이에 "HHH" 또는 "LLL"이 표시됩니다. | Temperature is outside the measurable range (-50°C to +70°C). | Move the probe to an environment within the specified temperature range. |
보증 및 지원
Zacro products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Zacro web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.
