1. 서론
본 설명서는 제품의 설치, 작동 및 유지 관리에 대한 자세한 지침을 제공합니다. Webasto 1533 Digital Timer. This timer is designed to control Webasto Thermo Top C heaters, allowing for convenient pre-programming of heating cycles. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. 안전 정보
- Always ensure the vehicle's power supply is disconnected before attempting any installation or maintenance.
- Installation should ideally be performed by a qualified technician to prevent damage to the device or vehicle.
- Do not expose the timer to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- 정품만 사용 Webasto replacement parts and accessories.
3. 제품 오버view
그만큼 Webasto 1533 Digital Timer is an oval-shaped control unit featuring an LCD display and intuitive buttons for setting time and programming heating functions. It allows users to schedule heater operation in advance.

그림 3.1: 앞쪽 view 의 Webasto 1533 Digital Timer, showing the oval shape, LCD display with '7:30' and a flame icon, and control buttons (up, down, set, flame/heater icon, fan icon).

그림 3.2: 그만큼 Webasto 1533 Digital Timer displayed with its original packaging, a foam gasket, and a mounting screw. The packaging indicates multilingual labels for 'Digital timer 1533'.
4. 설치 및 설정
그만큼 Webasto 1533 Digital Timer is designed for integration with your vehicle's Webasto Thermo Top C heating system. Proper installation is crucial for optimal performance.
4.1 타이머 설치
- Select a suitable location within the vehicle cabin that is easily accessible to the driver and away from direct heat or moisture.
- Ensure there is sufficient space behind the mounting surface for the electrical connector.
- Use the provided mounting screw to secure the timer in place.
4.2 전기 연결
The timer connects to the heater control unit via a dedicated wiring harness (not included, may need to be purchased separately). Refer to your heater's installation manual for specific wiring diagrams.

그림 4.1: 뒤쪽 view 의 Webasto 1533 Digital Timer, showing the product label with model number '1322580A' and the 4-pin electrical connector.

그림 4.2: Close-up of the 4-pin electrical connector on the rear of the Webasto 1533 Digital Timer, highlighting the gold-plated pins for connection to the wiring harness.
- Connect the 4-pin connector from the wiring harness to the corresponding port on the back of the timer. Ensure a secure fit.
- Once connected, restore power to the vehicle. The timer display should illuminate.
4.3 시계 설정
- 를 누르세요 세트 단추. 시간 숫자가 깜박입니다.
- 사용하세요 < 그리고 > 버튼으로 시간을 조정합니다.
- 누르다 세트 다시 한번. 분 숫자가 깜빡일 것입니다.
- 사용하세요 < 그리고 > 버튼을 사용하여 분을 조정합니다.
- 누르다 세트 a third time to confirm the time.
5. 사용 설명서
5.1 Manual Heater Activation
To manually turn on the heater, press the flame/heater icon button. The heater will start and operate for a preset duration (typically 30 minutes, adjustable via heater settings).
5.2 Programming a Heating Time
The timer allows you to program up to three different start times for your heater.
- 를 누르세요 세트 button repeatedly until 'P1' (Program 1) appears on the display.
- 누르다 세트 again. The hour digits for P1 will flash.
- 사용하세요 < 그리고 > buttons to set the desired hour.
- 누르다 세트. The minute digits for P1 will flash.
- 사용하세요 < 그리고 > buttons to set the desired minutes.
- 누르다 세트 to confirm P1.
- Repeat steps 1-6 for P2 and P3 if additional programs are desired.
- To activate a program, press the flame/heater icon button until the desired program (P1, P2, or P3) is displayed and the flame icon is solid. The heater will start at the programmed time.
5.3 Deactivating a Program
To deactivate an active program, press the flame/heater icon button until the flame icon disappears from the display.
6. 유지관리
그만큼 Webasto 1533 Digital Timer requires minimal maintenance.
- 청소: 디스플레이를 닦고 casing는 부드러운 d로 발음합니다.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 배터리: The timer does not contain user-replaceable batteries for its primary function. Power is supplied by the vehicle's electrical system.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 비어 있습니다. | 전원 공급 없음; 연결이 느슨함 | Check vehicle's power supply and timer's electrical connection. |
| Heater does not start at programmed time | Program not activated; incorrect time setting; heater fault | Ensure program is active (flame icon solid). Verify current time and programmed time. Check heater for other faults. |
| 버튼이 반응하지 않습니다 | Temporary software glitch; physical damage | Disconnect and reconnect power to reset. If problem persists, contact technical support. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | Web아스 토 |
| 모델 번호 | 1322580A |
| 호환 히터 | Webasto Thermo Top C (12V) |
| 치수(길이 x 너비 x 높이) | 11.2 x 8.1 x 3.8cm |
| 품목 무게 | 98g |
| 전원 공급 장치 | 12V (from vehicle) |
9. 보증 및 지원
이것 Webasto 1533 Digital Timer is a genuine Webasto part, ensuring quality and compatibility with your heating system. For warranty information, please refer to the documentation provided with your original heater or contact your Web아스토 딜러.
Technical support is available for assistance with installation, operation, or troubleshooting. Please contact your authorized Webasto service partner or visit the official Web아스 토 web지원 연락처 정보는 사이트에서 확인하세요.





