소개
구매해주셔서 감사합니다asing the STATUS High Power 13 LED Lantern. This manual provides important information regarding the safe operation, maintenance, and specifications of your new lantern. Please read this manual thoroughly before use and retain it for future reference.
안전 정보
Always observe the following safety precautions to prevent injury or damage to the lantern:
- Do not look directly into the LED light source when the lantern is on, as this may cause eye damage.
- Keep the lantern away from water and moisture. This product is not waterproof.
- Do not attempt to disassemble or modify the lantern. Repairs should only be performed by qualified personnel.
- Ensure batteries are inserted with correct polarity (+/-). Incorrect insertion can cause damage or leakage.
- Remove batteries if the lantern will not be used for an extended period to prevent leakage and corrosion.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x STATUS High Power 13 LED Lantern
- 4 x D Batteries (included)
설정
배터리 설치
The STATUS High Power 13 LED Lantern requires 4 x D batteries for operation. These batteries are included with your purchase.
- Locate the battery compartment cover, typically at the base or rear of the lantern.
- 덮개를 비틀거나 걸쇠를 풀어서 수납공간을 여세요.
- Insert the 4 D batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
- If a battery saving plastic tag is present, remove it before inserting batteries.
- 배터리 함 덮개를 단단히 닫습니다.
그림 1: 전면 view of the STATUS High Power 13 LED Lantern, illustrating its design and the array of 13 LED bulbs.
작동 지침
켜기/끄기
The lantern is equipped with a simple on/off switch.
- 등불을 켜려면 ON, slide the switch to the 'ON' position. The 13 LEDs will illuminate.
- 등불을 켜려면 끄다, slide the switch to the 'OFF' position. The LEDs will turn off.
유지
청소
To clean the lantern, wipe the exterior with a soft, damp 천으로 닦아주세요. 연마성 세제를 사용하거나 랜턴을 물에 담그지 마세요.
배터리 교체
When the light output diminishes, it is time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section to replace the 4 x D batteries.
참고: 사용한 배터리는 현지 규정에 따라 책임감 있게 폐기하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 랜턴이 켜지지 않습니다. | 배터리가 소진되었거나 잘못 삽입되었습니다. Plastic battery saving tag 제거되지 않았습니다. | Check battery polarity and ensure they are fresh. Remove any plastic battery saving tags. |
| 빛이 어둡습니다. | 배터리가 부족합니다. | Replace all 4 D batteries with new ones. |
| Intermittent light. | Loose battery connection or faulty switch. | Ensure batteries are seated firmly. If problem persists, contact customer support. |
명세서
| 상표 | 상태 |
| 모델 번호 | SLEDREDLANT1PKB2 |
| 광원 유형 | 주도의 |
| 조명의 수 | 13 |
| 전원 | 배터리 구동 |
| 배터리 유형 | 4 x D 배터리 |
| 권tage | 6 볼트 |
| 재료 | 플라스틱 |
| 색상 | 빨간색 |
| 제품 치수 | 16 x 10.01 x 10.01cm |
| 품목 무게 | 500g |
| 영역 조명 분류 | IP00 |
보증 및 지원
For product support or warranty inquiries, please contact the manufacturer:
Status International (UK) Ltd
Unit 1, Whitehall 26 Business Park
Heathfield Lane, Birkenshaw
Bradford, BD11 2HW
영국
보증 청구를 위해 구매 증명서를 보관하십시오.
