1. 서론
This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your APC Smart-UPS SRT 10KVA Rack Mount Uninterruptible Power Supply (UPS) with an integrated 208/240V to 120V Step-Down Transformer. Please read this manual thoroughly before installing or operating the equipment.
The APC Smart-UPS SRT 10KVA is designed to provide reliable power protection for critical electronic equipment, ensuring continuous operation during power outages and fluctuations. The integrated step-down transformer allows for flexible deployment in environments requiring 120V output from a 208/240V input source.
2. 안전 정보
중요 안전 지침:
- 장치를 설치, 작동, 서비스 또는 유지 관리하기 전에 이 지침을 주의 깊게 읽고 장비를 살펴보며 장치에 익숙해지십시오.
- This UPS contains internal batteries and may present a shock hazard even when disconnected from the AC mains.
- 배터리 서비스는 배터리와 필요한 예방 조치에 대해 잘 알고 있는 사람이 수행하거나 감독해야 합니다. 승인되지 않은 사람이 배터리에 가까이 하지 않도록 하십시오.
- 배터리를 불 속에 버리지 마십시오. 배터리가 폭발할 수 있습니다.
- 배터리를 열거나 훼손하지 마십시오. 방출된 전해질은 피부와 눈에 해롭습니다. 독성이 있을 수 있습니다.
- Replace batteries only with the same type and number of batteries or battery packs recommended by the manufacturer.
- Do not connect the UPS to a non-grounded outlet.
- 연결된 모든 장비에 적절한 접지가 되어 있는지 확인하십시오.
- 유지보수 또는 서비스를 수행하기 전에 항상 UPS의 전원을 차단하십시오.
3. 설정
3.1 풀기 및 검사
Carefully unpack the UPS and its components. Inspect for any shipping damage. If damage is found, notify the carrier and dealer. The package should contain the UPS unit, rack-mounting hardware, and documentation.
3.2 랙 마운팅
The SRT 10KVA RM is designed for installation in a standard 19-inch equipment rack. Follow the instructions provided with the rack-mounting kit to securely install the UPS and the step-down transformer module into the rack. Ensure adequate ventilation space around the unit.
그림 1: 앞쪽 view of the APC Smart-UPS SRT 10KVA Rack Mount UPS system, showing the main UPS unit and associated battery packs/step-down transformer modules installed in a rack. The central unit features a display panel indicating 'Output 208.0 V' and 'Online'.
3.3 전기 연결
- 입력 전력: Connect the UPS input power cord to a dedicated 208V or 240V AC circuit. Ensure the circuit breaker rating is appropriate for the UPS capacity.
- Step-Down Transformer Connection: Connect the output of the main UPS unit to the input of the step-down transformer module using the provided cables.
- Output Power (120V): Connect your critical equipment to the 120V output receptacles on the step-down transformer module. Do not overload the outlets.
- Network Management Card (Optional): If applicable, install and configure the network management card for remote monitoring and control.
3.4 초기 전원 켜기
After all connections are secure, press the power button on the front panel of the UPS. The UPS will perform a self-test and then enter online mode. Verify the output voltage and status on the front panel display.
4. 운영
4.1 전면 패널 디스플레이
The front panel LCD provides real-time information about the UPS status, input/output voltage, battery charge, load level, and various alarms. Use the navigation buttons (ESC, OK, UP, DOWN) to access different menus and settings.
4.2 기본 작업
- 켜기: 전원 버튼이 화면에 불이 들어올 때까지 길게 누르세요.
- 끄기: Press and hold the power button until the UPS shuts down. Ensure all connected equipment is safely powered off first.
- 자가 진단: Initiate a self-test from the front panel menu to verify battery and UPS functionality.
4.3 배터리 관리
The UPS continuously monitors battery health. The display will indicate battery charge level and estimated runtime. Perform periodic battery self-tests as recommended to ensure optimal performance.
5. 유지관리
5.1 배터리 교체
The UPS batteries are user-replaceable. Refer to the specific battery replacement instructions provided with your replacement battery modules. Always use genuine APC replacement battery cartridges (RBCs) to ensure compatibility and safety. Battery replacement should only be performed by qualified personnel.
5.2 청소
UPS 본체와 통풍구를 깨끗하게 유지하고 먼지가 쌓이지 않도록 하십시오. 외부를 닦을 때는 마른 천을 사용하십시오. 액체 세척제나 용제를 사용하지 마십시오.
5.3 환경 고려 사항
Operate the UPS within the specified temperature and humidity ranges. Avoid exposing the unit to direct sunlight, excessive heat, or moisture. Ensure proper airflow around the unit to prevent overheating.
6. 문제 해결
이 섹션에서는 일반적인 문제에 대한 해결책을 제공합니다. 보다 복잡한 문제의 경우 APC 기술 지원팀에 문의하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| UPS가 켜지지 않습니다. | No input power; Battery disconnected; UPS fault | Check input power connection and circuit breaker; Ensure battery connections are secure; Contact support if fault persists. |
| UPS에서 계속해서 경고음이 울립니다. | On battery; Overload; Low battery | Check input power; Reduce load; Allow battery to recharge. |
| 출력 전력 없음 | UPS off; Output breaker tripped; Internal fault | Turn on UPS; Reset output breaker; Contact support. |
| 배터리 사용 시간이 짧습니다 | Battery nearing end of life; Overload; Battery not fully charged | Replace battery; Reduce load; Allow battery to charge for 24 hours. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | SRT 10KVA RM |
| 상표 | 항공우주국(APC) |
| ASIN | B018JDJCQW |
| 한국어: | 079643813773 |
| 패키지 크기 | 30 x 17 x 17 인치 |
| 품목 무게 | 0.01 Ounces (Note: This weight may refer to packaging or a specific component, not the full unit.) |
| 제조업체 | APC / Schneider Electric |
| 첫 번째 이용 가능 날짜 | 23년 2017월 XNUMX일 |
8. 보증 및 지원
APC provides a limited warranty for this product. For detailed warranty information, please refer to the warranty card included with your product or visit the official APC website. Technical support is available to assist with installation, troubleshooting, and product inquiries. Please have your model number and serial number ready when contacting support.
추가 지원을 받으려면 다음을 방문하세요. 아마존에서 APC 스토어를 만나보세요 또는 공식 APC web대지.
