1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your Lotus ATS-800 Round Bidet Seat. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
이미지 1.1: 위에서 아래로 view of the Lotus ATS-800 Round Bidet Seat with its control panel.
2. 안전 정보
Observe the following safety precautions to reduce the risk of electric shock, fire, injury, or property damage.
- 전기 요구 사항: The unit requires a 120V GFCI (Ground Fault Circuit Interrupter) outlet. Ensure your electrical outlet meets this specification.
- 힘: The bidet operates at 120 volts and consumes 660 watts.
- 설치: Installation must comply with all local plumbing and electrical codes. If you are unsure, consult a qualified professional.
- 수압: Ensure water pressure is within acceptable limits for bidet operation.
- 어린이들: 어린이가 기기를 가지고 놀지 않도록 감독하십시오.
- 청소: 제품을 청소하기 전에 전원을 차단하십시오. 제품을 물에 담그지 마십시오.
- 인증: This product is cUL certified, ensuring compliance with safety standards.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Lotus ATS-800 Round Bidet Seat Unit
- T-Valve for water connection
- 급수 호스
- 장착 플레이트
- 장착 볼트 및 와셔
- 사용 설명서 (본 문서)
4. 설치
The Lotus ATS-800 is designed for easy DIY installation. All necessary installation parts are included. Follow these general steps:
- 화장실 준비하기: 변기의 급수 밸브를 잠그고 물을 내려 물탱크를 비우세요. 기존 변기 시트를 제거하세요.
- T-밸브를 설치하세요: Disconnect the toilet's water supply hose from the fill valve. Install the T-valve between the fill valve and the water supply hose.
- 장착 판 : Secure the mounting plate onto the toilet bowl using the provided bolts and washers.
- 비데 좌석 부착: 비데 시트를 장착판에 딸깍 소리가 나면서 제자리에 고정될 때까지 밀어 넣으세요.
- 물 호스 연결: Connect one end of the bidet's water supply hose to the T-valve and the other end to the bidet unit.
- 물과 전력을 복구하세요: Turn on the water supply to the toilet. Check for leaks. Plug the bidet into a 120V GFCI outlet.
Image 4.1: Diagram illustrating the measurement differences between round and elongated toilet seats for proper bidet fit. The ATS-800 is designed for round toilets, typically 19.4 inches or less from the seat bolts to the front rim.
Image 4.2: The Lotus ATS-800 Bidet Seat shown installed on a toilet within a contemporary bathroom setting.
5. 운영
The Lotus ATS-800 offers various functions for enhanced hygiene and comfort. Refer to the control panel for specific button layouts.
Image 5.1: Close-up of the bidet's control panel, displaying buttons for various wash modes, temperature settings, and other functions.
5.1. 세탁 기능
- 후면 세척: Provides a standard posterior cleansing.
- 여성청결제: Offers a gentler, dedicated wash for feminine hygiene.
- 터보 세척: A stronger wash setting for thorough cleansing.
- 노즐 위치: Adjust the nozzle's position (5 levels) for optimal cleansing.
- 수압: Adjust water pressure (5 levels) to your preference.
- 물의 온도: Select from 3 heated water temperature settings.
5.2. 편의 기능
- 가열된 좌석: Enjoy a warm seat with 3 adjustable temperature settings.
- 온풍 건조기: A warm air dryer with 5 temperature settings helps reduce toilet paper usage.
- 부드럽게 닫히는 시트: The seat and cover close gently, preventing slamming.
5.3. 에너지 절약
- 에너지 절약 모드: Activates to reduce electricity consumption when the bidet is not in active use.
6. 유지관리
정기적인 유지 관리는 비데 시트의 수명 연장과 위생적인 작동을 보장합니다.
6.1. 노즐 청소
The bidet features a self-cleaning nozzle, which automatically rinses before and after each use. The nozzle is fully encased in stainless steel for improved hygiene and durability.
이미지 6.1: 클로즈업 view of the bidet's self-cleaning nozzle, showing water spraying for cleansing. The nozzle tip is designed for easy replacement.
6.2. 일반 청소
To clean the exterior of the bidet seat:
- 장치의 플러그를 콘센트에서 뽑으세요.
- 부드러운 d로 표면을 닦으십시오.amp 천과 순하고 비연마성 세척제.
- Do not use harsh chemicals, abrasive pads, or spray water directly onto the unit.
- 전원을 다시 연결하기 전에 장치가 완전히 말랐는지 확인하세요.
7. 문제 해결
If you encounter issues with your Lotus ATS-800, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 물 분사가 안되거나 약하게 분사됨 | Water supply valve closed, filter clogged, or low water pressure. | Ensure water supply valve is fully open. Clean the bidet's water filter. Check household water pressure. |
| No power or unit not responding | 기기 전원 플러그가 뽑혀 있고 전원이 꺼져 있습니다.tage, or GFCI tripped. | Check if the power cord is securely plugged in. Reset the GFCI outlet if tripped. Verify power to the outlet. |
| Heated seat or water not warming | Temperature setting too low, or Energy Save Mode active. | Adjust temperature settings higher. Disable Energy Save Mode temporarily to test. Allow time for heating. |
| Blinking red light (if applicable) | Indicates an issue with water supply or internal component. | Check water connections and filter. If the issue persists, contact customer support. |
If these steps do not resolve the issue, please contact Lotus customer support for assistance.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 | ATS-800 |
| 스타일 | 둥근 |
| 색상 | 하얀색 |
| 재료 | Stainless Steel (nozzle) |
| 제품 치수 | 1"L x 1"W (refer to installation guide for toilet fit) |
| 품목 무게 | 11.7 파운드 |
| 권tage | 120 볼트 |
| 왓tage | 660 와트 |
| 한국어: | 754105116936, 700424890958 |
| 제조업체 | Lotus Hygiene Systems |
| 인증 | cUL certified |
9. 보증 및 지원
Your Lotus ATS-800 Bidet Seat is covered by a 2년 제조사 보증. 본 보증은 정상적인 사용 중에 발생하는 재료 및 제조상의 결함을 보장합니다.
For warranty claims, technical support, or any questions not addressed in this manual, please contact Lotus Hygiene Systems directly. Refer to the product packaging or the official Lotus web최신 연락처 정보는 사이트에서 확인하세요.
