소개
The Niteye SE-A01 is a compact and powerful AAA flashlight designed for everyday carry and general utility. Despite its small size, it delivers significant illumination and features a user-friendly interface. This manual provides comprehensive instructions for its setup, operation, maintenance, and troubleshooting, ensuring you get the most out of your device.
Image: The Niteye SE-A01 AAA Flashlight, showcasin컴팩트한 디자인과 일체형 포켓 클립이 특징입니다.
패키지 내용
- 1 x SE-A01 Flashlight with Click Switch
- 예비 O-링
- 사용자 설명서
- 보증 카드
- Quality Inspection Card
설정
배터리 설치
The Niteye SE-A01 operates on a single AAA battery. Ensure correct polarity during installation to prevent damage to the device.
- 손전등의 꼬리 캡을 시계 반대 방향으로 돌려서 풉니다.
- AAA 배터리 1개를 양극(+)이 손전등 헤드 쪽을 향하도록 삽입하십시오.
- 꼬리 캡을 시계 방향으로 돌려 단단히 조여질 때까지 다시 조입니다.
이미지: 후면 view of the Niteye SE-A01, highlighting the tail cap and click switch for battery access and operation.
작동 지침
전원 켜기/끄기
To turn the flashlight on or off, fully press the tail switch until you hear a distinct click.
모드 선택
The SE-A01 features three distinct light levels: High, Mid, and Low. To cycle through these modes:
- With the flashlight turned on, gently half-press the tail switch (without clicking) to advance to the next mode.
- Repeat half-presses to cycle through the sequence: High → Mid → Low.
The flashlight is equipped with a memory function that automatically recalls the last used mode when the device is turned off and then back on.
이미지: 앞면 view of the Niteye SE-A01, showing the TIR lens and XP-G LED, which provide efficient light output.
유지
청소
Regularly clean the flashlight's body with a soft, slightly damp cloth. For the lens, use a specialized lens cleaning cloth to avoid scratches. Do not use abrasive cleaners or harsh chemicals.
오링 윤활
To maintain the flashlight's water resistance, periodically lubricate the O-rings with silicone grease. Replace any worn or damaged O-rings with the provided spares to ensure a proper seal.
배터리 관리
If the flashlight will not be used for an extended period, it is recommended to remove the battery. This prevents potential battery leakage and subsequent damage to the internal components of the device.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 손전등이 켜지지 않습니다. | Battery is dead or incorrectly inserted; tail cap is loose. | 배터리를 교체하거나 극성을 확인하세요. 테일 캡이 완전히 조여졌는지 확인하세요. |
| 불빛이 깜빡이거나 어둡습니다. | Low battery; loose tail cap; dirty contacts. | Replace battery. Tighten tail cap. Clean battery contacts and threads with a clean cloth. |
| 모드를 변경할 수 없습니다. | 꼬리 스위치가 제대로 반쯤 눌러지지 않았습니다. | Ensure a gentle, partial press of the tail switch without a full click to cycle modes. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | SE-A01 |
| 광원 | XP-G LED |
| 최대 전력 | 130루멘 |
| 빔 거리 | 40 미터 |
| 최대 실행 시간 | 20시간(저전력 모드) |
| 모드 | High, Mid, Low |
| 전원 | AAA 배터리 1개 |
| 재료 | 알류미늄 |
| 치수 | 8.13 x 1.4 x 1.3cm |
| 무게 | 18.14g (배터리 제외) |
| 색상 | 검은색 |
이미지: 측면 view of the Niteye SE-A01, showing the "SE-A01" model engraving and the durable aluminum body.
보증 및 지원
The Niteye SE-A01 includes a Warranty Card in its package. Please refer to the terms and conditions specified on the card for details regarding warranty coverage and duration. It is recommended to retain your purchase receipt along with the warranty card for any future claims.
For technical support, service inquiries, or issues not explicitly covered in this manual, please contact the manufacturer or your authorized point of purchase. Provide your product model number and a detailed description of the issue for efficient assistance.
Image: The Niteye SE-A01 standing upright, showcasing its integrated pocket clip for secure carrying and easy access.
