1. 서론
This manual provides instructions for the setup, operation, maintenance, and troubleshooting of your iRobot Roomba 886 robot vacuum cleaner. The Roomba 886 is designed to efficiently clean various floor types using its 3-phase AeroForce cleaning system and AeroForce extractors, which reduce maintenance requirements. It features programmable cleaning schedules and intelligent navigation.
2. 안전 정보
Read all safety instructions before using your Roomba 886. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- The Roomba 886 is for indoor use only.
- Do not expose the robot or its charging base to water or other liquids.
- 머리카락, 느슨한 옷, 손가락 및 신체의 모든 부분을 구멍이나 움직이는 부품에서 멀리 두십시오.
- Do not operate the robot in areas where there are exposed electrical outlets in the floor.
- 로봇이 작동하는 동안 어린이와 반려동물을 잘 살펴봐 주세요.
- Use only the manufacturer-specified power adapter and battery.
- 담배, 성냥, 뜨거운 재 등 타고 있거나 연기가 나는 물건은 집어 올리지 마세요.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- iRobot Roomba 886 Robot Vacuum Cleaner
- 홈 베이스 충전 스테이션
- 전원 케이블
- XLife Extended Life Battery (pre-installed or separate)
- AeroForce Anti-Tangle Brushes (pre-installed)
- HEPA 필터(사전 설치 또는 별도)
4. 설정
4.1. 배터리 충전
Before first use, fully charge the Roomba's battery. Place the Home Base charging station against a wall in an open, uncluttered area. Plug the power cable into the Home Base and then into a wall outlet. Place the Roomba onto the Home Base, ensuring the metal charging contacts align. The battery indicator will pulse amber while charging and turn solid green when fully charged.
그림 1: The iRobot Roomba 886 robot vacuum cleaner positioned on its Home Base charging station. The robot is circular with a black and silver finish, featuring a central 'CLEAN' button.
4.2. 초기 프로그래밍
Once charged, you can set the current time and schedule cleaning cycles. Refer to the on-robot display and buttons for navigation through the programming menu. Detailed instructions for setting schedules are provided in the operating section.
5. 사용 설명서
5.1. 청소 주기 시작하기
Press the large 'CLEAN' button on the top of the robot to start a cleaning cycle. The Roomba will automatically adjust its cleaning pattern based on the room size and obstacles. To pause cleaning, press 'CLEAN' again. To send the Roomba back to its Home Base, press the 'DOCK' button.
그림 2: A close-up top view of the iRobot Roomba 886, highlighting the 'CLEAN' button and other control indicators on its surface.
5.2. 청소 일정 계획
The Roomba 886 can be programmed to clean at specific times. Use the 'SCHEDULE' button and arrow keys on the robot's control panel to set desired cleaning times for each day of the week. Ensure the robot is on its Home Base and fully charged for scheduled cleanings to execute.
5.3. Intelligent Navigation
The Roomba 886 uses intelligent navigation to cover all areas of your floor. It detects dirtier areas and spends more time cleaning them. It also uses sensors to avoid stairs and other drop-offs, and to navigate around furniture.
6. 유지관리
Regular maintenance ensures optimal performance of your Roomba 886.
6.1. 먼지통 비우기
Empty the dust bin after each cleaning cycle or when the 'Bin Full' indicator illuminates. Press the bin release button located at the rear of the robot, pull out the bin, and empty its contents into a trash receptacle.
6.2. Cleaning the AeroForce Extractors
The AeroForce Anti-Tangle Brushes (extractors) should be cleaned weekly. Pinch the yellow tabs on the brush frame to open the brush guard. Remove the extractors and clean any hair or debris wrapped around them or trapped in their bearings. Reinstall the extractors, ensuring they click into place.
6.3. HEPA 필터 청소
The HEPA filter should be cleaned weekly and replaced every 2-3 months, depending on usage. Remove the filter from the dust bin and tap it against a trash can to dislodge debris. Do not wash the filter with water.
6.4. 센서 및 충전 접점 청소
Wipe the robot's charging contacts, cliff sensors, and wall-following sensor with a clean, dry cloth monthly. This ensures proper navigation and charging.
그림 3: A diagram illustrating various components of the Roomba 886, including the dust bin, extractors, and sensors, indicating areas for regular maintenance.
7. 문제 해결
If your Roomba 886 encounters an issue, consult the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Roomba not charging | Dirty charging contacts; Home Base unplugged; Battery not installed correctly. | Clean charging contacts on robot and Home Base. Ensure Home Base is plugged in. Reinstall battery. |
| Roomba not cleaning effectively | Full dust bin; Clogged filter; Tangled extractors. | Empty dust bin. Clean or replace filter. Clean AeroForce extractors. |
| Roomba gets stuck frequently | Obstacles on floor; Dirty cliff sensors. | Clear floor of loose cables, rugs, or small items. Clean cliff sensors. |
| 오류 메시지가 표시됩니다 | 구체적인 내부 문제. | Refer to the robot's display for the error code and consult the iRobot support web특정 솔루션을 위한 사이트입니다. |
8. 사양
- 상표: 아이로봇
- 모델 번호: R886
- 치수(길이 x 너비 x 높이): 35.3 x 35.3 x 9.2cm
- 무게: 3.8 킬로그램
- 힘: 14.67 와트
- 권tage: 240 볼트
- 소음 수준: 58데시벨
- 배터리 수명: 약 1시간
- 필터 유형: 헤파
- 표면 추천: 카펫과 딱딱한 바닥
- 특징: 무선 작동
9. 보증 및 지원
For warranty information, please refer to the documentation included with your purchase or visit the official iRobot website. For technical support, troubleshooting assistance beyond this manual, or to order replacement parts, contact iRobot customer service through their official channels.
