소개
The Gingko Gravity Cube Click Clock is an innovative alarm clock designed for ease of use and modern aesthetics. This device features a sound-activated LED display, a gravity-controlled alarm function, and a touch-sensitive snooze. This manual provides detailed instructions for setting up, operating, and maintaining your Gravity Cube Click Clock.
그림 1: 전면 view of the Gingko Gravity Cube Click Clock.
설정
Before using your Gravity Cube Click Clock, please follow these steps for initial setup.
1. 장치 전원 공급
The clock can be powered via USB or batteries.
- USB 전원 : Connect the provided USB cable to the DC5V port on the back of the clock and plug the other end into a USB power adapter (not always included) or a powered USB port.
- 배터리 전원: Open the battery compartment on the back of the clock. Insert 1 Lithium Polymer battery (required, not always included) according to the polarity markings. Ensure the battery is securely placed.
Figure 2: Back panel with controls and power input.
2. Initial Settings (Time, Date, Temperature)
Upon first power-on, the display will activate. You will need to set the current time and date.
- 를 누르세요 세트 button on the back of the clock to enter setting mode.
- 사용하세요 + 그리고 - 값을 조정하는 버튼(예: 시, 분, 년, 월, 일).
- 누르다 세트 again to confirm each setting and move to the next parameter.
- Continue until all settings (time, date, temperature unit if applicable) are configured.
작동 지침
1. Display Activation
The LED display is sound-activated. It will automatically switch off when the room is quiet to conserve power. To activate the display:
- Make a sound (e.g., clap your hands).
- Gently tap the bedside table or surface the clock is resting on.
The display will show time, date, and temperature alternately.
Figure 3: Clock displaying time.
2. 알람 설정
The Gravity Cube features a gravity-controlled alarm.
- 를 누르세요 알람 아이콘 button on the back of the clock to enter alarm setting mode.
- 사용하세요 + 그리고 - 원하는 알람 시간을 설정하려면 버튼을 누르세요.
- 를 누르세요 알람 아이콘 확인하려면 다시 버튼을 누르세요.
- To activate the alarm, ensure the side of the clock with the alarm icon is facing upwards. The display will show an alarm indicator.
- To deactivate the alarm, turn the clock over so a different side is facing upwards. The alarm indicator will disappear.
3. 스누즈 기능
알람이 울리면 스누즈 기능을 활성화할 수 있습니다.
- Gently touch the top surface of the clock (where "SNOOZE" is indicated). The alarm will pause for a short period (typically 5-9 minutes) and then sound again.
4. Voice/Sound Control Sensitivity (V/S)
그만큼 V/S button on the back panel may allow adjustment of the sound activation sensitivity for the display. Refer to the specific product packaging or a more detailed manual for precise control over this feature.
유지
To ensure the longevity and proper functioning of your Gingko Gravity Cube Click Clock, follow these maintenance guidelines:
- 청소: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the rubberized finish.
- 배터리 교체: If using battery power, replace the Lithium Polymer battery when the display dims or functions become erratic. Ensure correct polarity when inserting new batteries.
- 저장: 장기간 시계를 보관할 경우, 배터리 누출을 방지하기 위해 배터리를 제거하세요.
문제 해결
If you encounter issues with your Gravity Cube Click Clock, refer to the following common problems and solutions:
- Display Not Activating:
- Check power source: Ensure USB cable is securely connected or batteries are correctly inserted and not depleted.
- Make a louder sound or tap the surface more firmly to activate the display.
- 알람이 울리지 않음:
- Verify the alarm is set correctly (refer to "Setting the Alarm" section).
- Ensure the side with the alarm icon is facing upwards to activate the alarm.
- Check battery level if operating on batteries.
- Alarm Cannot Be Turned Off:
- Turn the clock over to a different side to deactivate the alarm.
- If the issue persists, temporarily remove batteries or disconnect USB power to reset the device.
- 잘못된 시간/날짜:
- Re-enter the setting mode using the 세트 button and adjust the time and date.
- Ensure batteries are not low, as this can sometimes affect timekeeping.
명세서
| 모델 번호 | GK18TL |
| 상표 | 은행나무 |
| 제품 치수 | 2.95 x 2.95 x 2.95인치(7.5 x 7.5 x 7.5cm) |
| 품목 무게 | 9.2 온스(260그램) |
| 전원 | USB DC5V or 1 Lithium Polymer battery (not included) |
| 디스플레이 유형 | LED, Sound Activated |
| 알람 기능 | Gravity Controlled On/Off, Touch Sensitive Snooze |
보증 및 지원
Specific warranty information for the Gingko Gravity Cube Click Clock GK18TL is typically provided with the product packaging or available on the manufacturer's official web사이트. 보증 범위 및 조건에 대한 자세한 내용은 다음 자료를 참조하십시오.
For technical support or further assistance, please contact Gingko customer service through their official web구매 시 제공된 사이트 또는 연락처 정보.
