소개
구매해주셔서 감사합니다asing the Capello Self-Setting Atomic Clock with Calendar & Indoor Temperature. This clock is designed to provide accurate timekeeping, date display, and indoor temperature readings, all within a sleek, contemporary design. Its self-setting atomic feature ensures precise time synchronization.
주요 특징
- Self-Setting Atomic Time: Automatically synchronizes with the WWVB radio signal for precise time.
- 디지털 디스플레이: Bright and easy-to-read digital readout.
- 달력 기능: Displays month, date, and day of the week.
- 실내 온도: Provides current indoor temperature in Fahrenheit or Celsius.
- 이중 경보: Two independent alarm settings for versatile use.
- 세련된 디자인: Durable polyurethane frame with a black plastic face, suitable for any room decor.
- 배터리 구동: Operates on AAA batteries (not included).
패키지 내용
- Capello Self-Setting Atomic Clock
- 사용 설명서 (본 문서)
설정
1. 배터리 설치
Locate the battery compartment on the back of the clock. Insert 3 AAA batteries (not included) according to the polarity indicators (+ and -). Ensure the battery compartment cover is securely closed.
그림 1: 앞쪽 view of the Capello Self-Setting Atomic Clock. This image displays the clock's digital screen, showing the time (12:35 PM), two alarm indicators (ALM 1, ALM 2), the date (12:30 MO), and the indoor temperature (68.2°F). The clock has a white frame and a blue-tinted digital display.
2. Initial Power-On and Atomic Signal Reception
Upon battery installation, the clock will automatically attempt to receive the WWVB atomic time signal. This process may take several minutes to several hours, especially during initial setup. For best reception, place the clock near a window and away from electronic devices that may cause interference. The atomic signal is typically stronger at night.
그림 2: 클로즈업 정면 view of the Capello Self-Setting Atomic Clock. This image highlights the clear digital display, which shows the time, date, and temperature. The white frame of the clock is visible, emphasizing its clean design.
A signal strength indicator (often a tower icon with waves) will appear on the display once a successful signal is received. If the signal is not received immediately, the clock will default to a manual time setting. You can manually initiate a signal search by holding the "WAVE" button (if present) on the back of the clock for a few seconds.
작동 지침
1. 수동 시간 및 날짜 설정
In case the atomic signal is not available or for manual adjustment:
- 를 누르고 계세요 세트 button (or similar, refer to back panel buttons) for a few seconds until the display flashes.
- 사용하세요 UP 그리고 아래에 깜빡이는 값(예: 시, 분, 년, 월, 일)을 조정하는 버튼.
- 누르다 세트 again to confirm the selection and move to the next setting.
- Repeat until all desired settings are configured.
2. 알람 설정
The clock features two independent alarms (ALM 1 and ALM 2).
- 를 누르세요 경보 button (or ALM 1/ALM 2 button) to select the alarm you wish to set.
- 를 누르고 계세요 알람 설정 button (or similar) until the alarm time flashes.
- 사용하세요 UP 그리고 아래에 알람 시간과 분을 조정하는 버튼.
- 누르다 알람 설정 확인합니다.
- 알람을 활성화/비활성화하려면 해당 버튼을 누르십시오. 알람 ON / OFF 버튼을 누르면 활성화 시 디스플레이에 알람 아이콘이 나타납니다.
3. 온도 표시
The clock displays indoor temperature. To switch between Fahrenheit (°F) and Celsius (°C), locate the 화씨/섭씨 button on the back of the unit and press it.
그림 3: 각진 view of the Capello Self-Setting Atomic Clock. This perspective shows the clock's depth and the sleek design of its white frame, along with the clear digital display from a side angle.
유지
청소
부드럽고 마른 천으로 시계를 닦으십시오. 연마성 세제나 용제를 사용하지 마십시오. 디스플레이나 부품이 손상될 수 있습니다.asing.
배터리 교체
When the display dims or the clock stops functioning, replace the AAA batteries. Always replace all batteries at the same time with new ones. Dispose of old batteries responsibly according to local regulations.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Clock not setting automatically. | Weak or no atomic signal reception. Interference from other electronics. Incorrect time zone setting. | Relocate the clock closer to a window, away from electronic devices (TVs, computers, microwaves). Try initiating a manual signal search (WAVE button). Ensure correct time zone is set if applicable. Note that the signal is often stronger at night. |
| 디스플레이가 어둡거나 아무것도 표시되지 않습니다. | 배터리가 부족합니다. | 모든 AAA 배터리를 새 배터리로 교체하십시오. |
| Time is incorrect after Daylight Saving Time change. | Atomic clock may take up to 24 hours to adjust or requires manual adjustment for DST. | Allow up to 24 hours for automatic adjustment. If it doesn't adjust, manually set the time. Some atomic clocks may not automatically adjust for DST and require manual intervention. |
| 알람이 울리지 않습니다. | Alarm not activated. Alarm volume too low (if adjustable). | Ensure the alarm icon is visible on the display. Check alarm settings and ensure the time is correctly set. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 카펠로 |
| 모델 | B0170ZSMGG |
| 디스플레이 유형 | 디지털 |
| 전원 | 배터리 구동(AAA 3개, 포함되지 않음) |
| 특징 | Atomic, Alarm, Calendar, Indoor Temperature |
| 장착 유형 | 테이블탑 |
| 제품 치수 | 0.71 x 5.79 x 5.35 인치 |
| 품목 무게 | 9.6 온스 |
| 프레임 소재 | 폴리우레탄 |
| 색상 | White (Frame), Black (Dial) |
보증 및 지원
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Capello web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.
For further assistance, you may contact Capello customer service through their official channels. Please have your model number (B0170ZSMGG) ready when contacting support.
