1. 서론
로그Tag UTRIX-16 is a high-performance, multi-use temperature data logger designed for reliable and accurate monitoring across a wide range of applications. This device records temperature data and generates comprehensive PDF reports without requiring special software or hardware. Its integrated USB connector allows for easy data transfer and configuration.
2. 안전 정보
- Do not expose the device to extreme physical shock or vibration.
- Avoid immersing the device in liquids.
- 기기를 열거나 개조하려고 하지 마세요. 보증이 무효화되고 기기가 손상될 수 있습니다.
- 현지 규정에 따라 배터리를 폐기하십시오.
- Ensure the USB connector is clean and dry before connecting to a computer.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 통나무Tag UTRIX-16 PDF Temperature Data Logger
- 사용 설명서 (본 문서)
4. 디바이스 오버view
The UTRIX-16 features a compact design with clear indicators and control buttons.
그림 1: 앞쪽 view of the LogTag UTRIX-16 PDF Temperature Data Logger. This image displays the device's front panel, showing the "ALERT" and "OK" indicator lights, and the "STOP" and "START/Mark" buttons. The LogTag brand and "USB PDF TEMPERATURE RECORDER" text are visible, along with a serial number barcode.
- 경고 표시기: Flashes when a pre-configured temperature alert threshold has been exceeded.
- 정상 표시기: Flashes to confirm normal operation and within-range temperature readings.
- 정지 버튼: Press to stop the current logging session.
- START/Mark Button: Press to start a new logging session or to insert a mark into the data stream during logging.
- Integrated USB Connector: Located at the bottom, used for connecting to a computer for configuration and data download.
그림 2: 로그Tag UTRIX-16 with its integrated USB connector extended. This view highlights the USB-A plug, ready for connection to a computer's USB port, facilitating direct data transfer and device configuration.
5. 설정
5.1 초기 구성
The UTRIX-16 is typically pre-configured for immediate use. However, for custom settings (e.g., logging interval, alert thresholds, start delay), you will need to use the LogTag Analyzer software. This software is available for download from the official LogTag web대지.
- Download and install the LogTag 분석기 소프트웨어 통나무Tag Recorders Software.
- Connect the UTRIX-16 to a USB port on your computer.
- 로그Tag Analyzer software should automatically detect the connected device.
- Follow the on-screen prompts within the software to configure logging parameters as needed.
그림 3: 로그Tag UTRIX-16 data logger connected to a computer's USB port. This illustrates the direct connection method for data download and configuration, eliminating the need for a separate interface cradle.
5.2 배터리 정보
The UTRIX-16 uses a CR2 battery (included). The battery is designed for long life and is generally not user-replaceable without specialized tools. If battery replacement is required, it is recommended to contact LogTag support or an authorized service center.
6. 운영
6.1 Starting a Logging Session
To start a new logging session:
- Ensure the device is not currently logging (check the OK/ALERT indicators).
- 를 누르고 계세요 시작/표시 button for approximately 5 seconds until the OK indicator flashes rapidly.
- Release the button. The OK indicator will flash at regular intervals, indicating that logging has started.
6.2 Stopping a Logging Session
To stop an active logging session:
- 를 누르고 계세요 멈추다 button for approximately 5 seconds until the ALERT indicator flashes rapidly.
- Release the button. The device will cease logging.
6.3 Marking Data
During an active logging session, you can insert a mark into the data stream:
- 짧게 누르세요 시작/표시 button (less than 2 seconds).
- A mark will be recorded in the data, visible when the data is downloaded and analyzed.
7. Data Retrieval and Reporting
The UTRIX-16 generates a PDF report directly when connected to a computer.
- Connect the UTRIX-16 to a USB port on your computer.
- 해당 장치는 이동식 드라이브로 표시됩니다.
- Locate and open the generated PDF report file. This report contains a summary of the logging session, temperature graphs, and statistical data.
- For advanced analysis and configuration, use the LogTag 분석기 소프트웨어.
8. 유지관리
8.1 청소
부드러운 천으로 기기를 깨끗하게 닦아주세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
8.2 배터리 교체
The battery in the UTRIX-16 is designed for extended use and is not intended for user replacement. If the battery life is depleted, contact LogTag support for service options.
9. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Device does not start logging. | Incorrect button press duration; device already logging; battery depleted. | Ensure the START/Mark button is held for approximately 5 seconds. Check if the device is already logging. Connect to LogTag Analyzer to check battery status. |
| 컴퓨터가 장치를 인식하지 못합니다. | USB 연결 불량; USB 포트 불량; 드라이버 문제. | Ensure the USB connector is fully inserted. Try a different USB port. Reinstall LogTag 분석기 소프트웨어. |
| PDF 보고서가 생성되지 않았습니다. | Logging session not completed; device not recognized as a drive. | Ensure the logging session has been stopped. Verify the device appears as a removable drive. |
| ALERT indicator flashing. | Temperature exceeded pre-set limits. | This indicates an alert condition. Review the PDF report or LogTag Analyzer data to identify when and for how long the limits were exceeded. |
10. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 유트릭스-16 |
| 온도 범위 | -25°C ~ +70°C (-13°F ~ +158°F) |
| 연결성 | 통합 USB |
| 전원 | CR1 배터리 2개(포함) |
| 제품 치수 | 3.66 x 2.15 x 0.34 인치 |
| 무게 | 1.27 온스 |
| 재료 | 플라스틱 |
| 특징 | High Accuracy, PDF Reporting |
11. 보증 및 지원
통나무Tag products are manufactured to high standards. For warranty information and technical support, please refer to the official LogTag web사이트를 방문하거나 가까운 대리점에 문의하세요. 구매 영수증을 구매 증빙 자료로 보관하세요.
공식 로그Tag Web대지: www.logtag-recorders.com
