1. 서론
This manual provides detailed instructions for the safe and efficient operation and maintenance of your Kegco XCK-1B Commercial Kegerator. Please read all instructions carefully before installation and use. Retain this manual for future reference.
The Kegco XCK-1B is a commercial-grade kegerator designed for dispensing beverages on tap. It features durable construction, efficient cooling, and a spacious interior. This unit is ETL and ETL Sanitation Listed and NSF Compliant, meeting recognized product safety standards for draft beer dispensers.
그림 1: 전면 view of the Kegco XCK-1B Commercial Kegerator with single tap tower.
2. 안전 정보
경고: 화재, 감전 또는 부상의 위험을 줄이려면 다음 기본 예방 조치를 따르세요.
- 기기를 사용하기 전에 모든 지침을 읽으세요.
- 적절히 접지된 콘센트에만 연결하세요.
- Do not repair or replace any part of the unit unless specifically recommended in this manual. All other servicing should be referred to a qualified technician.
- 청소나 유지관리 작업을 하기 전에는 반드시 기기의 플러그를 뽑으세요.
- Do not use this appliance near water or in excessively damp 환경.
- 통풍구에 장애물이 없도록 깨끗이 유지하세요.
- 인화성 추진제가 들어 있는 에어로졸 캔 등 폭발성 물질을 이 기기에 보관하지 마십시오.
- 본 기기는 신체적, 감각적 또는 정신적 능력이 저하된 사람(어린이 포함)이나 경험 및 지식이 부족한 사람이 사용하도록 의도된 것이 아니며, 안전을 책임질 사람으로부터 기기 사용에 관한 감독이나 지시를 받은 경우에만 사용할 수 있습니다.
- 장치가 안정적이고 평평한 표면에 놓여 있는지 확인하십시오.
- Handle CO2 cylinders with care. Ensure proper ventilation when connecting or disconnecting CO2.
3. 제품 오버view 및 기능
The Kegco XCK-1B Kegerator is designed for commercial and home use, offering robust construction and efficient beverage dispensing.
주요 특징:
- 상업용 등급: NSF compliant and ETL sanitation listed.
- Reliable Cooling: Powerful 1/7 hp compressor with forced air refrigeration ensures consistent temperatures throughout the cabinet and up to the faucet.
- 내구성 있는 구조: Steel construction with a brushed stainless steel top and a diamond plate floor designed to withstand frequent keg changes.
- Large Interior Capacity: Accommodates one full-size keg, up to two quarter slim kegs, or up to four 5-gallon kegs.
- External CO2 Tank Mount: Allows for larger CO2 tanks or saves interior space.
- 휴대성: Equipped with 4-inch locking casters for easy movement.
- Self-Closing Door: Features a magnetic gasket for positive door sealing and a lock for security.
- 일체형 물받이 트레이: Built-in drip tray with a drain and internal drain receptacle for easy cleaning.
- Air-Cooled Tower: Cold air is directed into the 3-inch diameter draft tower to minimize foam.
- 디지털 온도 조절: Easy-to-use digital display with a temperature range of 33-43°F, programmable defrost, and alarm functions.
그림 2: 이상view of key features including drip tray, air-cooled tower, internal thermometer, digital display, and rubber floor mat.
4. 설정 지침
4.1 포장 풀기 및 배치
- 포장재를 조심스럽게 모두 제거하십시오. 추후 운송에 필요할 경우를 대비하여 포장재를 보관하십시오.
- Place the kegerator on a flat, level, and sturdy surface capable of supporting its weight when fully loaded.
- Ensure there is adequate ventilation around the unit (at least 4 inches of space on the sides and back) to allow for proper heat dissipation.
- 냉매가 안정될 수 있도록 제품을 최소 2~4시간 동안 똑바로 세운 후 전원을 연결하십시오.
4.2 캐스터 설치
- The unit comes with 4-inch locking casters. Carefully tilt the unit and screw the casters into the designated holes at the bottom corners.
- Ensure all casters are securely tightened.
4.3 Draft Tower Installation
- The kegerator includes a 3-inch diameter draft tower. Position the tower over the opening on the top of the unit.
- Connect the beer line from the tower to the internal cooling system.
- Secure the tower to the top surface using the provided hardware.
4.4 CO2 Tank and Dispense Kit (Not Included)
This kegerator does not include a direct draw dispense kit. You will need to acquire a separate dispense kit and CO2 tank.
- Mount your CO2 tank externally using the provided knockout and mounting bracket. This allows for larger tanks and saves interior space.
- Connect the CO2 regulator to the CO2 tank and then connect the gas line to your dispense kit.
- Follow the instructions provided with your dispense kit for connecting the beer lines to the keg and the draft tower.
4.5 Keg Loading
Figure 3: Keg capacity configurations for the XCK-1B.
- Open the kegerator door. The interior features a durable diamond plate floor and a rubber floor mat to reduce shock.
- Carefully place the desired keg(s) inside the unit. The XCK-1B can hold one full-size (15.5 gal) keg, one pony size (7.75 gal) keg, two quarter slim (7.75 gal) kegs, or up to four 5-gallon kegs (with an external CO2 tank).
- Ensure kegs are stable and do not obstruct the door or internal components.
그림 4: 내부 view of the Kegco XCK-1B, illustrating space for kegs and internal cooling components.
5. 사용 설명서
5.1 초기 전원 켜기 및 온도 설정
- After allowing the unit to settle for 2-4 hours, plug the kegerator into a grounded electrical outlet.
- Locate the digital temperature control panel, typically on the back side of the unit.
- Use the controls to set your desired temperature. The optimal operating temperature range for most beverages is 33-43°F (0.5-6°C).
- The unit features a programmable defrost function, an alarm to alert you of notifications, and a night mode for energy saving. Refer to the digital controller's specific instructions for detailed programming.
그림 5: 디지털 온도 표시 및 제어 패널.
5.2 음료 제공
- Ensure your CO2 tank is connected, the regulator is set to the appropriate pressure (refer to your beverage's specific requirements, typically 10-12 PSI for beer), and the dispense kit is properly attached to the keg and tower.
- The air-cooled tower ensures that the beer lines remain cold all the way up to the faucet, reducing foam during pours.
- To dispense, pull the faucet handle forward. To stop, push the handle back.
Figure 6: Illustration of cold air circulation within the air-cooled tower to prevent foam.
6. 유지관리
6.1 물받이 청소
- The built-in drip tray with drain collects spills from the faucet.
- Any spills are routed into an internal drain receptacle. Regularly check and empty this receptacle.
- The drip tray features a removable grill for quick and easy cleaning. Wash with mild soap and water.
그림 7: 상세 view of the drip tray and drain system.
6.2 내부 청소
- 청소하기 전에 장치의 플러그를 뽑으세요.
- 광고로 내부를 닦다amp cloth and mild, food-safe cleaning solution.
- The rubber floor mat can be removed and cleaned separately. This mat helps reduce the shock of heavy kegs on the stainless steel floor.
- Ensure the interior is dry before plugging the unit back in.
6.3 콘덴서 코일 세척
- Periodically clean the condenser coils located at the back or bottom of the unit. Dust and debris can accumulate, reducing cooling efficiency.
- Use a soft brush or vacuum cleaner to gently remove any buildup.
7. 문제 해결
고객 지원에 문의하기 전에 다시 문의하세요.view 다음은 일반적인 문제와 해결책입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 단위가 작동하지 않습니다 | 전원이 꽂혀 있지 않음; 회로 차단기가 작동함; 전원 스위치가 꺼짐. | Ensure unit is plugged in; reset circuit breaker; turn power switch on. |
| 온도가 충분히 낮지 않습니다 | Temperature set too high; door not closed properly; excessive door openings; poor ventilation; dirty condenser coils. | Adjust temperature setting; ensure door is sealed; minimize door openings; ensure adequate clearance around unit; clean condenser coils. |
| Excessive foam during dispensing | Beer lines not cold; incorrect CO2 pressure; dirty beer lines; warm keg. | Allow unit to cool completely; verify CO2 pressure settings; clean beer lines; ensure keg is adequately chilled. |
| Water on floor inside unit | Drain tube clogged; high humidity. | Clear any obstructions from the drain tube; this is normal in high humidity. |
8. 사양
Refer to the following table for detailed product specifications of the Kegco XCK-1B Commercial Kegerator.
Figure 8: Dimensional drawing of the Kegco XCK-1B Kegerator.
| 사양 | 값 |
|---|---|
| 상표 | 케그코 |
| 모델 번호 | XCK-1B |
| 품목 무게 | 143파운드 |
| 제품 치수 | 31 x 23.5 x 40인치(깊이 x 너비 x 높이) |
| 용량 | 8.2입방 피트 |
| 설치 유형 | 독립형 |
| 폼 팩터 | 탑 |
| 특별 기능 | 가지고 다닐 수 있는 |
| 색상 | 검은색 |
| 권tage | 115 볼트 |
| 도어 힌지 | 오른쪽 |
| 도어 재질 유형 | 스테인리스 스틸 |
| 인증 | 전자상거래 |
| 포함된 구성 요소 | 싱글 탭 |
| 문의 수 | 1 |
9. 보증 및 지원
9.1 보증 정보
For specific warranty details, please refer to the warranty card included with your product or contact Kegco customer support directly. Keep your proof of purchase for warranty claims.
9.2 고객 지원
If you have questions, require assistance with setup, or need troubleshooting beyond what is covered in this manual, please contact Kegco customer support. Our knowledgeable team is available during regular business hours to provide timely and reliable help.
일반적으로 제조업체의 웹사이트에서 연락처 정보를 찾을 수 있습니다. web사이트 또는 제품 포장에 표시되어 있습니다.
