1. 서론
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell TE-MX 1600-2 CE Paint and Mortar Mixer. Please read these instructions carefully before using the device for the first time and keep them for future reference.
The Einhell TE-MX 1600-2 CE is a powerful and high-quality tool designed for mixing liquid and powdery building materials such as paints, mortar, plaster, and adhesives. Its robust construction and electronic speed control ensure optimal mixing results for various material consistencies.
2. 일반 안전 지침
감전, 부상 및 화재 위험을 예방하기 위해 항상 다음 안전 수칙을 준수하십시오.
- 개인 보호 장비: Always wear safety goggles, hearing protection, a dust mask, and protective gloves when operating the mixer.
- 작업 영역: Keep your work area clean, well-lit, and free from clutter. Do not operate the mixer in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- 전기 안전: 전원 공급 장치 볼륨을 확인하십시오.tage matches the rating on the mixer. Do not expose the mixer to rain or wet conditions. Avoid body contact with earthed or grounded surfaces.
- 안전한 그립: 믹서를 작동할 때는 항상 인체공학적 손잡이를 사용하여 양손으로 단단히 잡으십시오.
- 재료 호환성: Only mix materials for which the mixer is designed. Do not use the mixer for mixing food or other non-construction materials.
- 패들 부착: Ensure the mixing paddle is securely attached before starting the mixer.
- 사용하지 않을 때는 플러그를 뽑아두세요: Disconnect the mixer from the power supply before making any adjustments, changing accessories, or storing the tool.
- 어린이와 구경꾼: Keep children and bystanders away while operating the mixer.
3. 제품 오버view 및 구성 요소
Familiarize yourself with the main components of your Einhell TE-MX 1600-2 CE mixer.
Figure 1: The Einhell TE-MX 1600-2 CE Paint and Mortar Mixer with its mixing paddle attached. This image shows the overall design, including the motor housing, ergonomic handles, and the M14 threaded shaft with the mixing paddle.
그림 2: 상단 view of the mixer, highlighting the motor housing and the ergonomic handle design for comfortable two-hand operation.
Figure 3: Close-up of the electronic speed control dial, allowing for precise adjustment of mixing speed.
Figure 4: Detail of the robust M14 tool holder, designed for secure attachment of various mixing paddles.
4. 설치 및 조립
Follow these steps to prepare your mixer for operation.
- 짐 풀기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 운송 중 손상이 있는지 확인하세요.
- 믹싱 패들 부착하기:
- Ensure the mixer is unplugged from the power supply.
- Align the M14 thread of the mixing paddle with the M14 tool holder on the mixer.
- Screw the paddle clockwise onto the tool holder until it is hand-tight. Use a suitable wrench if necessary to secure it firmly, but do not overtighten.
- 전원 연결: Connect the mixer's power cable to a suitable grounded power outlet (230 Volts).
5. 사용 설명서
This section details how to effectively use your paint and mortar mixer.
5.1단 속도 선택
The TE-MX 1600-2 CE features a 2-speed gearbox and electronic speed control for optimal mixing.
- 1단 기어 (저속): Ideal for heavy, viscous materials like mortar, concrete, or plaster. Provides high torque for thorough mixing. (180 - 480 rpm)
- 2단 기어 (고속): Suitable for lighter, more liquid materials such as paints, varnishes, or adhesives. Offers higher speed for quick and smooth blending. (300 - 750 rpm)
Use the gear selector switch to choose the appropriate speed range before starting the mixer. The electronic speed control dial (Figure 3) allows for fine-tuning the speed within the selected gear.
5.2 소프트 스타트 기능
The mixer is equipped with a soft start function to prevent splashing and ensure a smooth start-up. When you press the trigger, the paddle will gradually increase speed until it reaches the set level.
5.3 혼합 절차
- 재료 준비: Place the material to be mixed into a sturdy mixing tub or bucket. Ensure the container is large enough to prevent overflow during mixing.
- Immerse Paddle: Lower the mixing paddle into the material until it is fully submerged.
- 혼합 시작: Press the trigger switch to start the mixer. Hold the mixer firmly with both hands.
- 속도 조정: Use the electronic speed control dial to adjust the mixing speed as needed for the material's consistency.
- 혼합 기법: Move the mixer slowly through the material, ensuring all parts are thoroughly blended. Avoid lifting the paddle out of the material while it is rotating to prevent splashing.
- 연속 작업: For extended mixing tasks, you can engage the lock-on button on the trigger switch to maintain continuous operation without holding the trigger. Press the trigger again to release the lock.
- 믹싱 완료: Once the material is uniformly mixed, release the trigger or the lock-on button. Lift the mixer out of the material only after the paddle has stopped rotating.
Figure 5: A user demonstrating the proper technique for mixing materials in a tub, holding the mixer firmly with both hands.
6. 유지관리 및 청소
정기적인 유지 관리는 믹서의 수명과 최적의 성능을 보장합니다.
- 항상 플러그를 뽑으세요: Before any cleaning or maintenance, ensure the mixer is unplugged from the power supply.
- Cleaning the Paddle: Immediately after use, clean the mixing paddle thoroughly to prevent material from hardening on it. Hardened material can reduce mixing efficiency and damage the paddle.
- 믹서기 본체 청소: 광고로 믹서 본체를 닦습니다.amp cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the motor housing.
- 환기 슬롯: Keep the ventilation slots clean and free from obstructions to prevent overheating.
- 저장: 믹서를 건조하고 안전한 곳에 보관하고 어린이의 손이 닿지 않도록 하십시오.
7. 문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 믹서가 작동하지 않습니다. | No power supply; faulty power cable; trigger switch not pressed correctly. | Check power connection and outlet. Inspect power cable for damage. Ensure trigger is fully pressed. |
| Reduced mixing power or speed. | Overload; material too viscous; paddle clogged; incorrect gear selected. | Reduce load. Add more liquid to material if appropriate. Clean paddle. Select lower gear for higher torque. |
| 과도한 진동이나 소음. | Loose paddle; bent paddle; internal damage. | Tighten paddle. Replace bent paddle. If problem persists, contact customer service. |
| 과열. | 통풍구가 막혔고, 지속적인 과부하가 발생했습니다. | Clean ventilation slots. Allow mixer to cool down. Reduce mixing duration for heavy materials. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Einhell customer support.
8. 기술 사양
- 모델: TE-MX 1600-2 CE
- 힘: 1600 와트
- 권tage: 230 볼트
- Gear 1 Speed: 180~480rpm
- Gear 2 Speed: 300~750rpm
- 공구 홀더 : M14
- 치수(길이 x 너비 x 높이): 31 x 32 x 20.2cm
- 무게: 3.48kg
- 재료: 금속(하우징 부품)
- 원산지: 중국
9. 보증 정보
Einhell products are manufactured with quality and care. This product is covered by the manufacturer's warranty in accordance with the laws of your country of residence. Please retain your proof of purchase for any warranty claims. The warranty covers defects in material and workmanship. It does not cover damage resulting from improper use, normal wear and tear, or unauthorized repairs.
10. 고객 지원
For technical assistance, spare parts, or service inquiries, please contact your local Einhell service center or visit the official Einhell website. Contact information can typically be found in the product packaging or on the Einhell web대지.
방문할 수 있습니다 Einhell Brand Store 더 많은 제품 정보를 보려면.
