제품 끝view
The Fatek FBs-24MAT2-AC is a compact and powerful Programmable Logic Controller (PLC) designed for industrial automation applications. It features a robust set of digital inputs and outputs, communication capabilities, and a wide operating voltage range, making it suitable for various control tasks.
그림 1: Fatek FBs-24MAT2-AC Programmable Logic Controller. This image displays the Fatek FBs-24MAT2-AC Programmable Logic Controller. It features various input (X) and output (Y) terminals, power input (AC100-240V), and communication ports (RS-232). Status indicator LEDs for Power (POW), Run (RUN), and Error (ERR) are visible on the front panel. The model number FBs-24MA is also clearly marked.
설정 및 설치
Proper installation is crucial for the reliable operation of the PLC. Follow these guidelines for setup:
1. 전원 연결
- Connect the AC power source (100-240VAC) to the IN (L) 그리고 N terminals. Ensure the power supply is stable and within the specified voltag전자 범위.
- The unit is UL Certified, ensuring compliance with safety standards.
2. Input and Output Wiring
- 디지털 입력(X0-X13): The PLC provides 14 points of 24VDC digital input. Up to 4 points support high-speed input (up to 10KHz). Connect your sensors and input devices to these terminals.
- 디지털 출력(Y0-Y9): The PLC features 10 points of Sink (NPN) transistor digital output. 4 points support high-speed output (10KHz). Connect your actuators and output devices to these terminals.
- Refer to the wiring diagram on the unit for specific terminal assignments.
3. 통신 포트
- The PLC has 1 built-in RS-232 port (labeled 포르투). This port is used for programming and communication with other devices. Additional RS-232 ports can be expanded if needed.
작동 지침
Once the PLC is powered and wired, its operation is controlled by the loaded program. Monitor the status indicators for operational feedback.
상태 표시기 :
- POW(권력): PLC에 전원이 공급되면 불이 켜집니다.
- RUN (Run): Illuminates when the PLC is executing its program.
- 오류(ERR): Illuminates when an error or fault condition is detected within the PLC or its program. Refer to the programming software for detailed error codes.
Programming of the PLC is performed using compatible software (not included) via the RS-232 communication port. Consult the software's documentation for programming procedures.
유지
The Fatek FBs-24MAT2-AC PLC is designed for robust industrial use and requires minimal maintenance. Adhere to the following for optimal performance:
- 청소: 먼지와 이물질이 제품에 닿지 않도록 하십시오. 청소할 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 용제를 사용하지 마십시오.
- 환경: Ensure the operating environment is within the specified temperature and humidity ranges to prevent damage. Avoid exposure to excessive vibration, moisture, or corrosive gases.
- 사이: 모든 배선 연결부를 주기적으로 점검하여 안전하고 부식되지 않았는지 확인하세요.
문제 해결
This section provides guidance for common issues. For complex problems, consult the manufacturer's technical support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원 없음 (POW LED 꺼짐) | 전원 공급 불량, 배선 오류, 퓨즈 단선. | Check power connections (L, N terminals). Verify power source voltage. Inspect internal fuses if accessible (consult manual). |
| ERR LED On | 프로그램 오류, 하드웨어 결함, 통신 오류. | Connect to PLC with programming software to read error codes. Check for wiring faults on I/O. Restart PLC. |
| PLC Not Responding | Program halted, communication issue, hardware malfunction. | Check RUN LED status. Verify communication cable and settings. Power cycle the PLC. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | FBs-24MAT2-AC (FBs-24MAT) |
| 제조업체 | 파텍 |
| 입력 포인트 | 14 points 24VDC digital input (up to 10KHz in 4 points) |
| 출력 포인트 | 10 Points Sink (NPN) transistor digital output (4 points 10KHz output) |
| 전원 공급 장치 | 100~240VAC |
| 통신 포트 | 1개의 내장 RS-232 포트 (최대 3개까지 확장 가능) |
| 인증 | UL 인증 |
| 패키지 크기 | 4.5 x 4 x 4 인치 |
| 품목 무게 | 1.06 파운드 |
| 디스플레이 유형 | LED Indicators (for POW, RUN, ERR) |
| 한국어: | 687965401075 |
보증 및 지원
For information regarding product warranty, please refer to the documentation provided with your purchase or contact the authorized Fatek distributor or seller from whom the product was acquired. Specific warranty terms and conditions may vary by region and seller.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact the manufacturer, Fatek, or your product supplier directly. Contact information can typically be found on the manufacturer's official web사이트 또는 구매 송장.
