Fatek FBs-20MAT2-AC PLC 컨트롤러 사용자 매뉴얼
Model: FBs-20MAT2-AC (FBs-20MAT)
1. 서론
The Fatek FBs-20MAT2-AC Programmable Logic Controller (PLC) is an advanced industrial control device designed for automation tasks. It features a user-friendly and readable multi-input/multi-output function structure, allowing for complex functionalities with fewer instructions compared to other PLC brands. This manual provides essential information for the proper installation, operation, and maintenance of your FBs-20MAT2-AC controller.
2. 제품 오버view
This image displays the Fatek FBs-20MAT2-AC Programmable Logic Controller. It features clearly labeled input (X) and output (Y) terminals, power input (AC100-240V), and status indicator LEDs for Power, Run, and Error. The model number FBs-20MA is visible on the front panel, along with TX/RX indicators for communication.
3. 설정 및 설치
3.1 전원 공급 장치 연결
The FBs-20MAT2-AC controller operates on a 100~240VAC power supply. Ensure the power source matches these specifications before connecting. Connect the AC power lines to the designated 'L' and 'N' terminals on the controller. Always ensure power is disconnected during wiring to prevent electrical shock.
3.2 Digital Input/Output Wiring
The controller features 12 points of 24VDC digital input (up to 10KHz in 4 points) and 8 points of Sink (NPN) transistor digital output (4 points 10KHz output). Refer to the terminal labels (X0-X13 for inputs, Y0-Y9 for outputs) for correct wiring. Ensure all connections are secure and follow industrial wiring standards.
3.3 통신 포트
The FBs-20MAT2-AC includes 1 built-in RS-232 port, which can be expanded up to 3 ports. This port is used for programming and communication with other devices. Connect your programming cable or communication device to the RS-232 port (labeled 'PORTO').
3.4 장착
Mount the PLC in a stable, well-ventilated enclosure, away from excessive heat, moisture, and electromagnetic interference. Ensure adequate space for wiring and heat dissipation.
4. 사용 설명서
4.1 프로그래밍 소프트웨어
The PLC is programmed using the WinProladder ladder programming tool. This software can be downloaded from the official Fatek website at no extra charge. Install the software on your computer and connect to the PLC via the RS-232 port to upload or download programs.
4.2 기본 작업
- 전원 켜기: After connecting the power supply, the 'POW' indicator LED should illuminate.
- 실행 모드: Once a program is loaded and the PLC is set to run mode, the 'RUN' indicator LED will illuminate, indicating active program execution.
- 오류 표시: If an error occurs, the 'ERR' indicator LED will illuminate. Refer to the troubleshooting section for common error resolutions.
- 의사소통: The 'TX' and 'RX' LEDs indicate data transmission and reception activity on the communication port.
5. 유지관리
Regular maintenance ensures the longevity and reliable operation of your PLC. Always disconnect power before performing any maintenance.
- 청소: Keep the PLC and its enclosure clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners or solvents.
- 환경 제어: Ensure the operating environment adheres to the specified temperature and humidity ranges. Protect the unit from excessive vibrations and corrosive gases.
- 연결 확인: 모든 배선 연결 부위의 조임 상태와 부식 또는 손상 징후를 주기적으로 검사하세요.
- 펌웨어 업데이트: Check the Fatek web성능 향상이나 문제 해결에 도움이 될 수 있는 펌웨어 업데이트가 있는지 해당 사이트를 확인하십시오.
6. 문제 해결
이 섹션에서는 일반적인 문제에 대한 해결 방법을 안내합니다. 복잡한 문제의 경우 기술 지원팀에 문의하십시오.
- No Power (POW LED Off):
- Check the AC power supply connection and ensure it is within the 100~240VAC range.
- Verify the power cable is securely connected to the PLC and the power outlet.
- 전원 회로의 퓨즈가 끊어졌는지 확인하십시오.
- PLC Not Running (RUN LED Off, POW LED On):
- Ensure a valid program is loaded into the PLC.
- Check if the PLC is in 'STOP' mode. Use WinProladder to switch to 'RUN' mode.
- Verify there are no critical errors indicated by the 'ERR' LED.
- Error Indication (ERR LED On):
- Connect to the PLC using WinProladder software to view the error code and description.
- Common errors include program syntax errors, I/O module faults, or memory issues.
- Consult the WinProladder software manual for specific error code interpretations.
- Communication Issues (TX/RX LEDs Inactive):
- Verify the RS-232 cable connection is secure and correct.
- Check the communication settings (baud rate, data bits, parity, stop bits) in WinProladder and ensure they match the PLC's settings.
- 컴퓨터에서 올바른 COM 포트가 선택되었는지 확인하십시오.
- 입출력 오류:
- Verify wiring for the specific input/output points.
- Check the status of the input devices (sensors, switches) and output devices (relays, indicators).
- Use WinProladder to monitor the real-time status of I/O points to diagnose the issue.
7. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | FBs-20MAT2-AC (FBs-20MAT) |
| 디지털 입력 | 12 points, 24VDC (up to 10KHz in 4 points) |
| 디지털 출력 | 8 points, Sink (NPN) transistor (4 points 10KHz output) |
| 통신 포트 | 1개의 내장 RS-232 포트 (최대 3개까지 확장 가능) |
| 전원 공급 장치 | 100~240VAC |
| 인증 | UL 인증 |
| 패키지 크기 | 4.5 x 4 x 4 인치 |
| 품목 무게 | 1.01 파운드 |
| 원산지 | 대만 |
| 권tage | 240볼트(AC) |
| 디스플레이 유형 | LCD 또는 LED |
| 작동 온도 | 섭씨 20도 |
| 한국어: | 687965401068 |
8. 보증 및 지원
For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact the manufacturer directly. The seller for this product is Fatek USA. You may also visit the official Fatek web추가 리소스 및 연락처 정보는 사이트를 참조하십시오.
