1. 제품 오버view
The Okin BetaDrive Linear Actuator Motor, part number 1.25.000.073.30 (also known as MTR157), is a replacement motor designed for power recliners and lift chairs. This motor is responsible for the smooth opening and closing of the lift mechanism, restoring full functionality to your furniture.
- 모델: 1.25.000.073.30 / MTR157
- 상표: Okin (Manufactured by Okin America)
- 기능: Operates the lift mechanism in power recliners and lift chairs.
이미지 1: 전체 view of the Okin BetaDrive Linear Actuator Motor. This image displays the complete unit, including the motor housing, linear shaft, and mounting brackets.
2. 안전 정보
WARNING: Always prioritize safety during installation and operation.
- 항상 조립 지침을 주의 깊게 읽고 따르세요.
- Do not attempt to operate the chair until it is fully assembled and all connections are secure.
- Keep fingers, clothing, and other body parts clear of the lift mechanism and moving parts while the chair is in use to prevent injury.
- 의자 제조업체가 명시한 최대 하중 용량을 초과하지 마십시오.
- 설치, 유지보수 또는 문제 해결 작업을 수행하기 전에 반드시 전원 공급 장치를 차단하십시오.
3. 설치 가이드
Replacing the Okin BetaDrive Linear Actuator Motor is a straightforward process, typically requiring basic tools. It is recommended to have assistance when flipping the recliner chair.
- Prepare the Chair: Unplug the recliner chair from the power outlet. Carefully flip the chair over to expose the underside mechanism.
- Identify the Old Motor: Locate the existing linear actuator motor. Note its mounting points and electrical connections.
- 전기 연결을 차단하십시오: Disconnect all electrical cables connected to the old motor. These typically include the main power cable and any control cables.
- 기존 모터를 제거하세요: Using appropriate tools (e.g., a wrench for bolts), unfasten the bolts or pins securing the old motor to the chair's frame. Carefully remove the old motor.
- 새 모터 설치: Position the new Okin BetaDrive Linear Actuator Motor in the same location as the old one. Secure it using the original bolts or pins. Ensure all connections are tight and the motor is stable.
- 전기 연결을 다시 연결하세요: Connect the electrical cables to the new motor. Ensure they are securely plugged in and routed to avoid pinching or damage when the chair operates.
- 테스트 작업: Carefully return the chair to its upright position. Plug the chair back into the power outlet. Test the recliner's functions (up and down) to ensure the new motor operates correctly and smoothly.
이미지 2: 클로즈업 view of the Okin BetaDrive Linear Actuator Motor's connector end. This image highlights the electrical connection points for installation.
4. 운영
Once installed, the Okin BetaDrive Linear Actuator Motor operates seamlessly with your recliner's existing control system. Simply use the chair's remote or integrated buttons to extend or retract the footrest and recline the backrest. The motor provides the necessary linear motion to achieve your desired position.
- Press and hold the "Recline" or "Extend" button to move the chair into a reclined position.
- Press and hold the "Upright" or "Retract" button to return the chair to its upright position.
- Release the button at any point to stop the motion.
5. 유지관리
Proper maintenance ensures the longevity and smooth operation of your Okin BetaDrive Linear Actuator Motor.
- 청소: Wipe clean the exterior of the motor and the linear shaft with a dry or slightly damp 옷감. 가혹한 화학 물질이나 연마성 세제를 사용하지 마십시오.
- 점검: Periodically inspect the motor and its connections for any signs of wear, damage, or loose fasteners. Ensure all cables are intact and not frayed.
- 매끄럽게 하기: The linear screw mechanism is typically pre-lubricated. Avoid applying additional lubricants unless specifically recommended by the manufacturer, as this could attract dust and debris.
- 힘: Ensure the motor is connected to a stable power source within the specified voltage 범위(24V).
6. 문제 해결
If you encounter issues with your recliner after installing the Okin BetaDrive motor, consider the following troubleshooting steps:
- 모터가 응답하지 않음:
- Check all power connections. Ensure the chair is plugged into a working outlet and all motor cables are securely connected.
- Verify the power supply unit (transformer) is functioning correctly.
- Inspect the hand control for damage or loose connections.
- Motor Operates Slowly or Jerkily:
- Ensure the chair's mechanism is not obstructed by foreign objects.
- Check for any binding in the chair's frame or moving parts that might impede the motor's movement.
- Confirm the chair is not overloaded beyond its weight capacity.
- 특이한 소음:
- Listen for the source of the noise. It could indicate a loose bolt, a worn part in the chair's mechanism, or an issue with the motor itself.
- If the noise persists and is clearly from the motor, contact customer support.
If troubleshooting steps do not resolve the issue, contact the manufacturer or a qualified technician for assistance.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 1.25.000.073.30 (MTR157) |
| 상표 | Okin (Manufacturer: Okin America) |
| 권tage | 24V |
| 힘 | 50와트 |
| 듀티 사이클 | 1분 켜기 / 8분 끄기 |
| 제품 치수 | 22인치 깊이 x 4인치 너비 x 4인치 높이 |
| 품목 무게 | 5.7파운드 |
| 재료 | 금속 |
| 색상 | 검은색 |
| 한국어: | 617762076633 |
8. 보증 및 지원
For warranty information or technical support regarding your Okin BetaDrive Linear Actuator Motor, please contact Okin America directly or the retailer from whom you purchased the product. Ensure you have your model number (1.25.000.073.30 or MTR157) and proof of purchase available when contacting support.
제조업체: Okin America
For patents and additional information, refer to the manufacturer's official website or documentation provided with your product.
