제품 끝view
The Reznor EMC-10-AK2-HG7 Electric Cabinet Unit Heater is designed for primary or supplementary heating, or freeze protection in various environments. This 208-volt unit features a two-speed motor and a maximum heat capacity of 34,144 BTU/hr. Its robust construction includes an 18-gauge stainless steel housing, tubular heating elements with fins, and an epoxy/polyester powder paint coating for enhanced corrosion resistance. The unit can be configured for either floor or ceiling mounting, offering flexible installation options.
이미지: 앞면 view of the Reznor EMC-10 Electric Cabinet Unit Heater, showing its white cabinet, top and bottom grilles, and the "REZNOR" logo in red.
안전 정보
- 제품을 수리하거나 청소하기 전에 항상 전원을 차단하십시오.
- 감전을 방지하려면 올바르게 접지하십시오.
- Do not block air intake or exhaust grilles.
- Maintain adequate clearance around the heater as specified in installation guidelines.
- 설치 및 유지관리는 자격을 갖춘 인력만이 수행해야 합니다.
- This unit operates at high temperatures; avoid contact with hot surfaces.
설정 및 설치
The EMC-10 unit can be installed as a floor-mounted or ceiling-mounted system. Proper installation is crucial for safe and efficient operation. Refer to the detailed installation manual provided with the product for specific mounting instructions, electrical wiring diagrams, and clearance requirements.
전기 연결
- The unit requires a 208V, 1 Phase electrical supply.
- 모든 배선은 국가 및 지역 전기 규정을 준수해야 합니다.
- Ensure the power supply matches the unit's voltage 및 위상 요구 사항.
- A dedicated circuit breaker is recommended for the heater.
작동 지침
The EMC-10 Electric Cabinet Unit Heater is equipped with a two-speed motor for flexible heating control. Operation is typically managed via an external thermostat or control system (not included with the unit).
기본 동작
- Ensure the unit is properly installed and connected to the power supply.
- Set the desired temperature on your external thermostat.
- The unit will activate when the ambient temperature falls below the thermostat setting.
- The two-speed motor allows for adjustment of airflow and heat distribution. Consult your control system's manual for specific fan speed selection.
- The high-temperature control with automatic reset provides an additional safety feature, shutting off the unit if overheating occurs.
유지
Regular maintenance ensures optimal performance and longevity of your Reznor EMC-10 unit. Always disconnect power before performing any maintenance.
- 월간 간행물: Inspect air intake and exhaust grilles for obstructions. Clean any dust or debris using a soft brush or vacuum cleaner.
- 매년: Have a qualified technician inspect the electrical connections, heating elements, and motor for wear or damage.
- Do not use abrasive cleaners or solvents on the unit's exterior. Use a damp cloth with mild soap if cleaning is necessary.
문제 해결
고객 지원에 문의하기 전에 다시 문의하세요.view 다음은 일반적인 문제와 해결책입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기기가 켜지지 않습니다. | No power supply; tripped circuit breaker; thermostat set too low; safety control activated. | Check power connection; reset circuit breaker; adjust thermostat setting; allow unit to cool if safety control tripped. |
| 열 출력이 부족합니다. | Blocked grilles; incorrect fan speed; unit undersized for space. | Clear obstructions from grilles; ensure proper fan speed setting; consult a professional for sizing verification. |
| 기기에서 이상한 소음이 납니다. | Loose components; motor issue; debris in fan. | Disconnect power and inspect for loose parts; contact a qualified technician for motor inspection. |
If the issue persists after attempting these solutions, please contact Reznor customer support.
명세서
- 모델: EMC-10-AK2-HG7
- 상표: 레즈너
- 권tage: 208V
- 단계: 1단계
- 힘: 10kW(XNUMXkW)
- 열용량: 34,144 BTU/시간
- 하우징 소재: 18게이지, 스테인리스 스틸
- 모터: Two-speed, direct drive, variable speed fan
- 코팅: Epoxy/polyester powder paint
- 안전 기능: High-temperature control with automatic reset
- 장착 옵션: Floor or Ceiling mounted
- ASIN: B014XAOY3Q
- 첫 번째 이용 가능: 4년 2012월 XNUMX일
보증 정보
The Reznor EMC-10 Electric Cabinet Unit Heater comes with a 1년 부품 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims or detailed terms and conditions, please refer to the official warranty document included with your product or contact Reznor customer support.
고객 지원
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Reznor customer support. Have your model number (EMC-10-AK2-HG7) and purchase date ready when you call.
Contact information for Reznor can typically be found on their official web사이트 또는 제품 포장에 표시되어 있습니다.
