소개
This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your AEG SMT 355 Corded Electric Chop Saw. Please read this manual thoroughly before operating the tool to ensure safe and efficient use. Keep this manual for future reference.
The AEG SMT 355 is a powerful corded electric chop saw designed for cutting various materials including metal, stainless steel, and wood, with a maximum cutting depth of 115 mm.
일반 안전 지침
화재, 감전 및 부상 위험을 줄이기 위해 항상 기본적인 안전 수칙을 준수하십시오. 이러한 수칙에는 다음 사항이 포함되지만 이에 국한되지는 않습니다.
- 안전 안경, 청력 보호 장비, 장갑 등 적절한 개인 보호 장비(PPE)를 착용하세요.
- 작업 공간이 깨끗하고, 조명이 밝으며, 방해물이 없는지 확인하세요.
- 어린이와 주변인이 작업 영역에 접근하지 못하도록 하십시오.
- 가연성 액체, 가스, 먼지 등 폭발 위험이 있는 환경에서는 전동 공구를 작동하지 마세요.
- 조정, 액세서리 교체 또는 공구 보관 전에 항상 전원 플러그를 전원 콘센트에서 분리하십시오.
- 절단하기 전에 공작물을 단단히 고정하십시오.
- Use only cutting wheels designed for the AEG SMT 355 and suitable for the material being cut.
제품 구성 요소
Familiarize yourself with the main components of your AEG SMT 355 chop saw.
그림 1: 전면 view of the AEG SMT 355 Corded Electric Chop Saw, showing the cutting wheel, guard, handle, and base.
그림 2: 후면 view of the AEG SMT 355 Corded Electric Chop Saw, highlighting the motor housing and power cord connection.
그림 3: 클로즈업 view of the integrated vise and clamping mechanism on the AEG SMT 355, used for securing workpieces.
설정 및 조립
- 짐 풀기: Carefully remove the chop saw from its packaging. Inspect for any damage that may have occurred during shipping. Report any damage to your retailer immediately.
- 설치: For stability and safety, it is recommended to securely mount the chop saw to a workbench or a stable stand using appropriate fasteners. Ensure the mounting surface can support the weight of the tool and the forces generated during operation.
- 블레이드 설치 (사전 설치되지 않은 경우):
- 도구의 전원 플러그가 뽑혀 있는지 확인하세요.
- 칼날 보호대를 들어 올리세요.
- 스핀들 잠금 버튼을 눌러 스핀들이 회전하는 것을 방지하세요.
- Use the provided wrench to loosen and remove the blade retaining nut and outer flange.
- Place the new 355 mm cutting wheel onto the spindle, ensuring the rotation arrow on the blade matches the direction of rotation indicated on the saw.
- Reinstall the outer flange and blade retaining nut. Tighten securely with the wrench while holding the spindle lock.
- 블레이드 가드를 내립니다.
- Vise Adjustment: The integrated vise can be adjusted to secure various workpiece sizes. Loosen the locking handle, slide the vise jaw to the desired position, and tighten the handle firmly to secure the workpiece.
작동 지침
- 작업물 준비:
- Ensure the workpiece is clean and free of debris.
- Mark the cutting line clearly.
- Place the workpiece firmly against the fence and secure it tightly with the vise mechanism. Ensure the workpiece is stable and will not shift during the cut.
- 전원 연결: Connect the chop saw to a suitable power outlet (230V, 50Hz). Ensure the power circuit can handle the 2300 Watts power consumption.
- 톱을 시작하다:
- 핸들을 단단히 잡으십시오.
- Press the trigger switch to start the motor. Allow the blade to reach full speed (3800 RPM) before beginning the cut.
- 절단하기:
- Slowly and steadily lower the rotating blade into the workpiece. Do not force the cut; let the saw do the work.
- Maintain a consistent downward pressure.
- Once the cut is complete, release the trigger switch and allow the blade to stop rotating completely before raising the saw arm.
- 톱을 멈추다: Release the trigger switch. The blade will stop rotating. Wait until the blade has completely stopped before moving the workpiece or making any adjustments.
유지
정기적인 유지관리는 톱의 수명과 안전한 작동을 보장합니다.
- 청소: After each use, disconnect the power and clean the saw. Remove dust, chips, and debris from the motor vents, blade guard, and base using a brush or compressed air. Do not use solvents that could damage plastic parts.
- 블레이드 검사: Regularly inspect the cutting wheel for wear, cracks, or damage. Replace worn or damaged blades immediately. Ensure the blade is always sharp and suitable for the material being cut.
- Vise and Clamp: Keep the vise mechanism clean and lubricated to ensure smooth operation.
- 전원 코드: Inspect the power cord for any signs of damage, cuts, or fraying. If damaged, have it repaired by a qualified technician.
- 카본 브러쉬: The motor's carbon brushes may need periodic inspection and replacement. Refer to a qualified service center for this procedure if you notice reduced power or excessive sparking.
- 저장: Store the chop saw in a dry, secure location out of reach of children and unauthorized users.
문제 해결
이 섹션에서는 발생할 수 있는 일반적인 문제에 대해 설명합니다. 여기에 나열되지 않은 문제가 발생하면 자격을 갖춘 서비스 기술자에게 문의하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 톱이 시작되지 않음 | No power supply; Faulty power cord/plug; Defective switch; Overload protection tripped. | Check power connection and outlet; Inspect power cord; Contact service for switch replacement; Reset circuit breaker. |
| 과도한 진동이나 소음 | Loose blade; Damaged blade; Loose mounting bolts; Worn bearings. | Tighten blade nut; Replace damaged blade; Tighten mounting bolts; Contact service for bearing replacement. |
| 불량한 절단 성능 | Dull or incorrect blade; Incorrect cutting technique; Workpiece not secured. | Replace with sharp, appropriate blade; Apply steady, even pressure; Secure workpiece firmly. |
| 모터가 과열됩니다 | Blocked ventilation slots; Overloading the motor; Continuous heavy use. | Clean ventilation slots; Reduce load; Allow motor to cool down. |
기술 사양
| 특징 | 사양 |
|---|---|
| 모델 | SMT 355 |
| 상표 | AEG |
| 전원 입력 | 2300 와트 |
| 무부하 속도 | 3800 RPM |
| Wheel/Blade Diameter | 355의 mm (14 인치) |
| 최대 절단 깊이 | 115mm (XNUMXmm) |
| 블레이드 소재 | 고속강철 |
| 표면 추천 | Metal, Stainless Steel, Wood |
| 전원 | 코드식 전기 |
| 품목 무게 | 16.5파운드(약 7.48kg) |
| 손잡이 재질 | 고무 |
| 패키지 크기 | 57.8 x 42.6 x 35.8cm |
보증 및 지원
Specific warranty terms and conditions for the AEG SMT 355 Corded Electric Chop Saw are typically provided with the product at the time of purchase or can be found on the official AEG web해당 지역의 웹사이트를 참조하십시오. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.
For technical support, service, or spare parts, please refer to the contact information provided by your retailer or visit the official AEG website for authorized service centers in your area. This manual does not contain specific contact details for support.
