1. 서론
This manual provides comprehensive instructions for the safe and correct installation, operation, and maintenance of your RICOO S5244 Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The RICOO S5244 is designed to securely mount flat-panel televisions ranging from 32 to 55 inches, with a maximum weight capacity of 50 kg. It supports various VESA mounting patterns and offers full motion capabilities including swivel, tilt, and rotation for optimal view각도를 나타냅니다.
Image 1.1: The RICOO S5244 Full Motion TV Wall Mount, shown in its compact, folded position.
2. 안전 정보
경고: 잘못된 설치는 심각한 부상 및 재산 피해를 초래할 수 있습니다. 본 설명서를 이해하지 못하거나 설치 안전성에 의문이 있는 경우, 자격을 갖춘 설치 전문가에게 문의하십시오.
- 설치 표면이 마운트와 텔레비전의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- Use only the provided hardware. Do not use the wall anchors for drywall or plaster walls; they are intended for solid concrete walls only.
- 최대 적재 용량은 50kg(110lbs)을 초과하지 마십시오.
- Always check the VESA pattern of your TV before installation to ensure compatibility.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
3. 패키지 내용
Verify that all components are present and undamaged before proceeding with installation. Refer to the parts list in your packaging for a complete inventory.
4. 설정 및 설치
4.1 설치 전 확인
Before mounting, confirm the following:
- TV 무게: Your TV must not exceed 50 kg (110 lbs).
- VESA 호환성: Check the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between them. The mount supports VESA patterns from 200x200 mm up to 400x400 mm.
Image 4.1: Illustration demonstrating how to measure VESA hole patterns on a television. The mount supports horizontal distances from 50mm to 400mm and vertical distances from 150mm to 400mm.
Image 4.2: Visual guide for compatible TV sizes (30-55 inches) and VESA patterns (100x100 to 400x400) for the S5244 mount.
4.2 벽면 플레이트 장착
- Determine the desired height and position for your TV. Use a stud finder to locate wall studs if mounting on wood stud walls.
- Place the wall plate against the wall at the desired height and use a level to ensure it is perfectly horizontal. Mark the drilling holes.
- Drill pilot holes according to the marked positions. For concrete walls, use a masonry drill bit and the provided concrete anchors. For wood studs, drill pilot holes directly into the center of the studs.
- Secure the wall plate to the wall using the appropriate screws and washers. Ensure all screws are tightened firmly.
4.3 TV 브래킷을 텔레비전에 부착하기
- 화면 손상을 방지하기 위해 TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
- Attach the two vertical TV brackets to the back of your television using the screws that fit your TV's VESA holes. Ensure the brackets are centered and securely fastened. Do not overtighten.
4.4 Mounting the Television to the Wall Plate
- 도움을 받아 브래킷이 부착된 TV를 조심스럽게 들어 올리세요.
- TV 브래킷을 벽면 플레이트에 걸어 고정하세요. TV가 벽면 플레이트에 단단히 고정되었는지 확인하세요.
- Engage any safety locking mechanisms on the brackets to prevent accidental dislodgement.
5. TV 벽걸이 마운트 작동 방법
The RICOO S5244 offers flexible viewing options through its full motion capabilities.
5.1 회전 조절
The mount allows for swiveling the TV up to 120 degrees (60 degrees left and 60 degrees right), depending on the TV size and wall clearance. Gently push or pull the TV to the desired angle.
Image 5.1: A television mounted on the S5244, demonstrating its ability to swivel up to 120 degrees for flexible view주고받음.
5.2 기울기 조정
The TV can be tilted +12 degrees upwards and -3 degrees downwards. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs to secure the position.
Image 5.2: The S5244 mount allowing a television to tilt up to 15 degrees (shown as 15 degrees up and 15 degrees down, but product specs state +12/-3 degrees).
5.3 회전 조정
For fine-tuning the level of your TV after installation, the front plate allows for a rotation adjustment of +/-3 degrees. This helps correct any slight misalignment.
Image 5.3: Illustration of the +/-3 degree rotation adjustment feature for leveling the television.
5.4 Wall Distance
The mount allows the TV to be positioned at a minimum distance of 80 mm from the wall and extended up to 370 mm.
Image 5.4: Visual representation of the adjustable wall distance, from a minimum of 80mm to a maximum of 370mm.
6. 유지관리
정기적인 유지 관리는 TV 벽걸이 거치대의 수명 연장과 안전한 작동을 보장합니다.
- 청소: 부드럽고 마른 천으로 거치대를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- 정기 점검: 모든 나사와 연결부가 단단히 조여져 있는지 주기적으로 점검하십시오. 필요한 경우 다시 조이십시오.
- 움직임: If the movement becomes stiff, apply a small amount of silicone-based lubricant to the articulating joints. Do not use oil-based lubricants.
7. 문제 해결
TV 벽걸이 거치대에 문제가 발생하면 다음의 일반적인 해결 방법을 참조하십시오.
- TV 수평이 맞지 않음: Use the +/-3 degree rotation adjustment feature to level the TV. Ensure the wall plate was installed level initially.
- Difficulty Moving TV: Check if any cables are snagged or if the tilt/swivel mechanisms are overtightened. Loosen slightly if needed. Ensure the TV weight is within the specified limit.
- 마운트가 헐거워진 느낌입니다: Immediately remove the TV from the mount. Re-check all wall plate and TV bracket connections. Ensure the wall anchors are appropriate for your wall type and securely installed. If unsure, consult a professional.
8. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 리코 |
| 모델 번호 | S5244 |
| 재료 | 강철 합금 |
| 색상 | 검은색 |
| 호환 가능한 TV 크기 | 32-55인치(81-140cm) |
| 최대 하중 용량 | 50kg(110파운드) |
| VESA 호환성 | 200x200, 300x200, 300x300, 400x200, 400x400 mm |
| 스위블 범위 | Up to 120 degrees (+/-60 degrees) |
| 기울기 범위 | +12도에서 -3도까지 |
| 회전 조정 | +/- 3도 |
| 벽 거리 | 80mm(최소) - 370mm(최대) |
| 장착 유형 | 벽걸이형 |
| 이동 유형 | Articulating, Swivel |
Image 8.1: Detailed technical drawing showing the dimensions and range of motion for the RICOO S5244 wall mount.
9. 보증 및 지원
Specific warranty information for the RICOO S5244 TV Wall Mount is not provided in this manual. For detailed warranty terms, product support, or to contact customer service, please visit the official RICOO web웹사이트를 참조하거나 제품 포장을 확인하세요.
For further assistance, you may visit the RICOO brand store on Amazon: RICOO Brand Store
