1. 서론
The ThermoPro TP-12 is a digital wireless thermometer designed to accurately monitor the internal temperature of your meat and the temperature of your oven or BBQ. With a remote range of up to 300 feet, this unit allows you to monitor your cooking from a distance, eliminating the need for constant supervision. It features dual probes, a timer, and various alarm functions to ensure your food is cooked perfectly every time.
This manual provides detailed instructions on how to set up, operate, and maintain your ThermoPro TP12 thermometer. Please read it thoroughly before first use.
2. 안전 정보
- 경고: Do not touch the stainless steel probes or wires with bare hands during or immediately after cooking, as they will be extremely hot. Always wear heat-resistant gloves.
- Keep the receiver and transmitter away from direct heat sources, open flames, or hot surfaces.
- Do not immerse the receiver or transmitter in water or place them in a dishwasher. They are not waterproof.
- The probes and wires are designed to withstand temperatures up to 716°F (380°C). Do not expose them to temperatures exceeding this limit.
- Ensure the probe cable is not pinched or damaged by oven doors or grill grates.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x 수신기 유닛
- 1 x 송신기 유닛
- 1 x Food Grade Stainless Steel Probe (6.5 inches)
- 1 x Oven/BBQ Stainless Steel Probe (3 inches)
- AAA 배터리 4개
Image: The ThermoPro TP12 package contents, showing the receiver and transmitter units, two stainless steel probes (one for food, one for oven/BBQ), and a metal clip for the oven probe.
4. 제품 구성품 및 특징
Image: The ThermoPro TP12 wireless thermometer system, displaying the receiver unit on the left with its large red display, the transmitter unit on the right, and the two stainless steel probes connected to the transmitter.
수신기 유닛
- 표시하다: Large LCD display showing food and BBQ/oven temperatures, timer, and alarm indicators.
- 버튼:
- HI/HR: Adjusts high temperature setting for BBQ/oven, or sets hours for timer.
- LO/MIN: Adjusts low temperature setting for BBQ/oven, or sets minutes for timer.
- 모드/조명: Switches between temperature setting mode and timer mode; activates backlight.
- 동조: Synchronizes receiver with transmitter.
- 시작 멈춤: Starts or stops the timer.
- HI/CL: Adjusts high temperature setting for food.
- 화씨/섭씨: 화씨와 섭씨 사이를 전환합니다.
- 경보: Flashes and beeps when programmed temperature is reached or connection is lost.
송신기 유닛
- 표시하다: Small LCD display showing current probe temperatures.
- Probe Jacks: Two ports for connecting the food and oven/BBQ probes.
- 전원 버튼: 온 / 오프 스위치.
- 와이어 스탠드: Integrated wire stand for tabletop use or hanging on an oven door.
프로브
- 식품 조사: 6.5-inch food grade stainless steel probe with a step-down tip for accurate and fast temperature readings.
- Oven/BBQ Probe: 3-inch stainless steel probe for monitoring ambient temperatures.
- 케이블: 40-inch stainless steel mesh cable, designed to withstand high temperatures.
이미지: 클로즈업 view of the 6.5-inch food grade stainless steel probe, highlighting its step-down tip design for improved accuracy and speed in temperature measurement.
5. 설정 지침
- 배터리 삽입:
- Open the battery compartment on the back of both the receiver and transmitter units.
- 각 장치에 AAA 배터리 2개를 올바른 극성(+/-)에 맞춰 삽입합니다.
- 배터리함을 단단히 닫으십시오.
Image: The ThermoPro TP12 receiver and transmitter units, illustrating the battery compartment location and icons representing the receiver's flash and beep alarm, dual temperature monitoring, and the inclusion of 4 AAA batteries.
- 프로브 연결:
- Plug the food probe into the "FOOD" jack on the transmitter.
- Plug the oven/BBQ probe into the "BBQ" jack on the transmitter.
- 전원 켜기:
- Slide the ON/OFF switch on the back of the transmitter to the "ON" position.
- The transmitter's display will show the current temperatures from the probes.
- The receiver will automatically synchronize with the transmitter. If not, press and hold the "SYNC" button on the receiver for 3 seconds.
6. 사용 설명서
6.1 온도 경보 설정
- 프로브 선택: Press the "MODE/LIGHT" button on the receiver to cycle through "FOOD" temperature setting, "BBQ" high temperature setting, and "BBQ" low temperature setting.
- 온도 조절:
- For "FOOD" temperature, press "HI/CL" to increase the target temperature.
- For "BBQ" high temperature, press "HI/HR" to increase the target temperature.
- For "BBQ" low temperature, press "LO/MIN" to increase the target temperature.
- The temperature will cycle back to the minimum after reaching the maximum.
- 설정 확인: The setting will automatically save after a few seconds of inactivity, or you can press "MODE/LIGHT" again to move to the next setting.
- When the probe temperature reaches the set alarm temperature, the receiver will flash and beep. Press any button to stop the alarm.
Image: The ThermoPro TP12 system in use, showing the receiver displaying both meat and oven temperatures, with the transmitter placed near an oven, demonstrating its ability to monitor two temperatures concurrently.
6.2 타이머 사용
- 타이머 모드로 들어가기: Press the "MODE/LIGHT" button repeatedly until "TIMER" is displayed on the receiver.
- 카운트다운 타이머 설정:
- Press "HI/HR" to set hours.
- Press "LO/MIN" to set minutes.
- Press "START/STOP" to begin the countdown.
- To pause, press "START/STOP" again. To reset, press and hold "START/STOP" for 3 seconds.
- 카운트 업 타이머: If the timer is set to 00:00 and "START/STOP" is pressed, the timer will begin counting up.
Image: The ThermoPro TP12 receiver unit demonstrating its countdown and count-up timer capabilities, showing how the display changes to indicate hours and minutes for timing cooking processes.
6.3 온도 단위 전환(°F/°C)
Press the "°F/°C" button on the receiver to toggle between Fahrenheit and Celsius temperature displays.
6.4 Remote Range and Signal Loss
The ThermoPro TP12 offers a remote range of up to 300 feet in open areas. Factors such as walls, obstacles, and electromagnetic interference can reduce this range.
If the receiver loses connection with the transmitter, it will alert you with an alarm. Move the receiver closer to the transmitter to re-establish the connection.
Image: The ThermoPro TP12 in an outdoor grilling scenario, illustrating its 300-foot remote range capability, with the user holding the receiver unit while the transmitter is near the grill.
7. 유지관리 및 관리
- 세척 프로브: Wash the stainless steel probes with hot soapy water after each use. Rinse thoroughly and dry completely. Do not immerse the probe connectors or wires in water.
- 청소 장치: 수신기 및 송신기 장치를 ad로 닦으십시오.amp 천으로 닦아주세요. 연마성 세제를 사용하거나 물에 담그지 마세요.
- 저장: Store the thermometer in a dry place at room temperature when not in use. Remove batteries if storing for extended periods to prevent leakage.
- 프로브 관리: 프로브 케이블을 과도하게 구부리거나 꺾지 마십시오. 내부 배선이 손상될 수 있습니다.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No display on receiver/transmitter. | 배터리가 방전되었거나 잘못 삽입되었습니다. | 올바른 극성을 확인하여 새 AAA 배터리로 교체하세요. |
| Receiver not syncing with transmitter. | Out of range; interference; transmitter off. | Move receiver closer to transmitter. Ensure transmitter is on. Press and hold SYNC button on receiver. |
| 온도 판독값이 부정확합니다. | Probe not fully inserted; damaged probe/cable. | Ensure probe is fully inserted into the food/oven. Check probe cable for visible damage. Contact customer support for probe replacement if damaged. |
| 알람이 울리지 않습니다. | Volume too low; alarm disabled; battery low. | Check receiver settings. Replace batteries. |
| "---" or "LLL" on display. | Probe not connected or damaged; temperature out of range. | Ensure probe is securely connected. If connected, probe may be damaged or temperature is below 32°F (0°C). |
| "HHH" on display. | 온도가 범위를 벗어났습니다. | Temperature is above 572°F (300°C). Remove probe from extreme heat. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 온도 범위 | 화씨 32도에서 화씨 572도(섭씨 0도에서 300도) |
| 온도 정확도 | 1.8~1°F(32~212°C)에서 ±0°F(±100°C) |
| Food Probe Length | 6.5인치 (식품 등급 스테인리스 스틸) |
| Oven/BBQ Probe Length | 3 inches (stainless steel) |
| 케이블 길이 | 40 inches (stainless steel mesh) |
| 원격 범위 | 최대 300피트(시야) |
| Receiver Display Size | 1.5 x 1.3인치(38 x 34mm) |
| Transmitter Display Size | 1.0 x 0.5인치(26 x 13.5mm) |
| 프로브 및 와이어 내열성 | 최대 716 ° C (380 ° F) |
| 인증 | FCC certified, CE certified, ROHS, FDA approved probe |
| 전원 | AAA 배터리 4개 (수신기용 2개, 송신기용 2개) |
10. 보증 및 지원
ThermoPro provides a 1-year warranty for this product from the date of purchase. By registering your product after purchase, you can receive an extended 3-year warranty.
Additionally, ThermoPro offers a lifetime warranty on their sensor probes. If your probe experiences temperature reading problems, a brand-new replacement probe will be provided free of charge.
For warranty claims, technical support, or any questions regarding your ThermoPro TP12 thermometer, please contact ThermoPro Customer Service:
- 핸드폰: 877-515-7797
- Web대지: Refer to the official ThermoPro web최신 연락처 정보와 지원 리소스를 제공하는 사이트입니다.
고객 지원팀에 문의하실 때는 모델 번호(TP12)와 구매 정보를 준비해 주시기 바랍니다.
