매뉴얼+

폴만 283.25

Paulmann 28325 LED Diamond Quadro GU5.3 12V 2700K Instruction Manual

모델: 283.25

1. 소개 및 제품 끝view

This manual provides essential information for the safe and efficient use of your Paulmann 28325 LED Diamond Quadro lamp. This product is a 3-watt LED lamp designed for 12-volt systems, featuring a GU5.3 base and emitting a warm white light at 2700 Kelvin. Its unique crystal reflector design provides directed illumination.

Paulmann 28325 LED Diamond Quadro GU5.3 lamp

Image 1.1: The Paulmann 28325 LED Diamond Quadro GU5.3 lamp.

2. 안전 지침

제품을 설치하거나 작동하기 전에 모든 안전 지침을 읽고 이해하십시오.amp이 지침을 따르지 않을 경우 감전, 화재 또는 기타 위험이 발생할 수 있습니다.

  • 전기 안전: Always disconnect power to the fixture before installing, removing, or servicing the lamp.
  • 권tage 호환성: 이 lamp operates on a 12V DC power supply. Do not connect it to a 230-volt AC mains supply without a suitable transformer.
  • 비조광: 이 LED lamp is 디밍 불가. Do not use it with dimmer switches, as this can damage the lamp 보증이 무효화됩니다.
  • IP20 등급: 난amp has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Use only in dry, indoor environments.
  • 온도: l 주위에 적절한 환기가 이루어지도록 하십시오.amp to prevent overheating. Do not cover the lamp.
  • 분해 : 제품을 분해, 개조 또는 수리하려고 시도하지 마십시오.amp. 내부에는 사용자가 수리할 수 있는 부품이 없습니다.
  • 처분: l 폐기amp 전자 폐기물에 관한 지역 규정에 따라.

3. 설정 및 설치

Follow these steps to properly install your Paulmann 28325 LED Diamond Quadro lamp:

  1. 전원 차단: Ensure the power supply to the lighting fixture is completely switched off at the main circuit breaker before beginning installation.
  2. Identify Socket: Verify that your fixture has a compatible GU5.3 socket. The GU5.3 base features two pins spaced 5.3mm apart.
  3. L 삽입amp: Carefully align the two pins of the LED lamp with the holes in the GU5.3 socket. Gently push the lamp 소켓에 단단히 고정될 때까지 밀어 넣으십시오. 억지로 밀어 넣지 마십시오.amp.
  4. 전원 공급 장치: Ensure the fixture is connected to a stable 12-volt DC power supply. If replacing a halogen lamp, ensure the existing transformer is compatible with LED loads.
  5. 복원력 : 일단 내가amp is securely installed, restore power to the fixture at the main circuit breaker.
클로즈업 view of the Paulmann LED Diamond Quadro GU5.3 bulb, highlighting its crystal reflector design and GU5.3 pins.

Image 3.1: Close-up of the GU5.3 LED lamp, showing the base pins.

Diagram illustrating various lamp base types, including the GU5.3 base relevant to this product, for proper identification.

Image 3.2: Diagram showing different lamp base types, including GU5.3 (12V section).

4. 사용 설명서

Operating the Paulmann 28325 LED Diamond Quadro lamp 간단합니다 :

  • 켜기/끄기: Use the standard wall switch or fixture switch to turn the lamp 켜기 또는 끄기.
  • 광 출력: 난amp provides a directed, warm white light (2700K) suitable for accent lighting or general illumination in appropriate fixtures.
  • 비조광: As stated previously, this lamp is not designed for dimming. Attempting to dim it may cause flickering, damage, or premature failure.

5. 유지관리

The Paulmann 28325 LED Diamond Quadro lamp 긴 수명과 내구성 있는 설계 덕분에 유지 보수가 거의 필요하지 않습니다.

  • 청소: l을 청소하려면amp전원이 꺼져 있는지 확인하십시오.amp is cool. Gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the lamp마감이나 내부 구성 요소.
  • Lamp 대사: 난amp has an average lifespan of 15,000 hours. When it reaches the end of its life, replace it with a new Paulmann 28325 LED Diamond Quadro lamp or a compatible GU5.3 12V LED lamp.
  • 사용자가 수리할 수 없는 부품: 난amp contains no user-serviceable parts. Do not attempt to open or repair it.

6. 문제 해결

If you encounter issues with your Paulmann 28325 LED Diamond Quadro lamp, 다음 문제 해결 가이드를 참조하세요.

  • Lamp 불이 켜지지 않음:
    • 조명기구의 전원이 켜져 있는지 확인하십시오.
    • l을 확인하세요amp is correctly and securely seated in the GU5.3 socket.
    • Verify that the power supply is providing 12 volts DC. An incompatible or faulty transformer can prevent the lamp 일에서.
    • l 검사amp for any visible damage. If damaged, replace the lamp.
  • Lamp 깜빡임:
    • l 확인amp 조광 스위치에 연결되어 있지 않습니다.amp 밝기를 조절할 수 없습니다.
    • Check the 12V DC power supply for stability. Fluctuations in voltage can cause flickering.
    • Ensure the transformer is compatible with LED loads. Some older transformers designed for halogen lamps may not work correctly with LEDs.
  • Light Output is Weak or Incorrect Color:
    • 내가 확인amp specifications match your requirements (e.g., 2700K warm white).
    • l을 확인하세요amp is receiving the correct 12V DC voltage. Under-voltage can reduce light output.

If these steps do not resolve the issue, please contact Paulmann customer support.

7. 사양

Detailed technical specifications for the Paulmann 28325 LED Diamond Quadro lamp:

특징사양
상표파울만
모델 번호283.25
Lamp 유형주도의
기본 유형GU5.3
권tage12볼트
왓tage3와트
광속250루멘
색온도2700 켈빈(웜화이트)
연색지수(CRI)80
빔 각도36도
수명15,000시간
치수(길이 x 너비 x 높이)3.7 x 3.7 x 5cm
지름37 밀리미터
길이50 밀리미터
IP 등급IP20
밝기 조절 가능아니요
에너지 효율 등급G
에너지 소비3kWh/1000시간
재료유리
EU Energy Label for Paulmann 28325, indicating an energy efficiency class G and consumption of 3 kWh/1000h.

Image 7.1: EU Energy Label for Paulmann 28325.

Detailed product data sheet for Paulmann 28325, providing technical specifications such as luminous flux, color temperature, and dimensions.

Image 7.2: Product data sheet with detailed specifications.

보다 자세한 제품 정보는 EPREL 데이터베이스를 참조하십시오. https://eprel.ec.europa.eu/qr/860106

8. 보증 및 지원

Paulmann products are manufactured to high-quality standards. For warranty information and customer support, please refer to the official Paulmann web사이트를 방문하거나 판매점에 문의하세요.

구매 영수증을 보관하여 보증 청구에 대비하세요.