Catit LED Flower Fountain User Manual
Model: Catit Flower Fountain
소개
Thank you for choosing the Catit LED Flower Fountain. This fountain is designed to provide your cat with a continuous supply of fresh, filtered water, encouraging healthy hydration habits. Its unique design and triple action filtration system ensure clean and great-tasting water for your feline companion.
Image: The Catit LED Flower Fountain, showcasing its white base and green top with a white and yellow flower spout.
안전 정보
- 분수대를 청소하거나 유지 보수하기 전에는 항상 전원을 차단하십시오.
- Ensure the power cord is not damaged and is placed where it cannot be tripped over or chewed by pets.
- Do not operate the fountain if the pump is making excessive noise, as this may indicate a low water level. Refill immediately.
- 이 제품은 실내에서만 사용하도록 설계되었습니다.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- The fountain is made of BPA-free materials, ensuring safety for your pet.
Image: Close-up of the Catit Flower Fountain showing the handy water level indicator and highlighting its BPA-free material construction.
구성 요소
The Catit LED Flower Fountain typically includes the following components:
- 물 저장소(기지)
- Pump with Power Cord
- 필터 트레이
- Triple Action Filter
- Flower Top / Spout
- Flower Stem (for different flow settings)
설정
- 린스 필터: Before first use, thoroughly rinse the Triple Action Filter under cold tap water for 10 minutes. This helps remove any loose carbon dust.
- 펌프를 조립하십시오: Place the pump securely in the designated area within the water reservoir. Ensure the power cord is routed through the provided channel.
- 필터 설치: Insert the rinsed Triple Action Filter into the filter tray.
- Place Filter Tray: Position the filter tray with the filter onto the pump assembly inside the reservoir.
- 물로 채우십시오: Fill the reservoir with fresh water up to the maximum fill line. The fountain has a 3-liter capacity.
- Attach Flower Top: Place the flower top onto the filter tray, ensuring it is seated correctly.
- 플러그인: Connect the power cord to a suitable electrical outlet. The fountain will begin operating.
Image: An internal diagram illustrating the water flow path within the Catit Flower Fountain, highlighting its compact and ergonomic design.
운영
The Catit LED Flower Fountain offers multiple water flow settings to cater to your cat's preference:
- 부드러운 흐름: Use the fountain without the flower stem for a gentle, bubbling surface.
- 거품이 이는 윗부분: Insert the flower stem without the yellow center for a calm, bubbling water surface.
- Flowing Streams: Insert the flower stem with the yellow center for multiple flowing water streams, mimicking a faucet.
Observe your cat to determine their preferred drinking method. Regular drinking is crucial for feline health, helping to prevent urinary tract diseases.
Image: Visual representation of the three distinct water flow settings available with the Catit Flower Fountain, designed for picky drinkers.
Image: A cat drinking directly from the flower spout of the Catit LED Flower Fountain.
유지
Regular cleaning and filter replacement are essential for maintaining the fountain's performance and your cat's health.
주간 청소:
- Unplug the fountain and disassemble all components (flower top, filter tray, filter, pump, reservoir).
- Wash all parts (except the pump) with warm water and a mild soap. Rinse thoroughly to remove any soap residue.
- Clean the pump by disassembling it and rinsing all internal parts. Use a small brush to remove any debris or mineral buildup.
- Reassemble the fountain as per the setup instructions.
Image: Hands demonstrating the ease of disassembling and cleaning the Catit Flower Fountain components under running water.
필터 교체:
The Triple Action Filter should be replaced approximately every 3-4 weeks, or more frequently if the fountain is used by multiple cats or if the water appears dirty.
- Unplug the fountain and remove the old filter.
- Rinse the new filter under cold tap water for 10 minutes before placing it in the filter tray.
- 오래된 필터는 책임감 있게 폐기하세요.
Image: An infographic detailing the three layers of the Catit Triple Action Filter: cotton mesh, active carbon, and ion exchange resin, for pure drinking water.
Image: Instructions showing how to rinse and submerge the Catit filter for 10 minutes before use, and how to verify it's an official product.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Fountain not operating / No water flow | 플러그가 꽂혀 있지 않음; 전원 꺼짐tage; Pump clogged; Insufficient water level. | Check power connection; Restore power; Clean pump; Refill water to appropriate level. |
| 펌프에서 과도한 소음 발생 | Low water level; Pump dirty or clogged. | Refill water immediately; Clean the pump thoroughly. |
| 물 흐름이 약함 | Filter clogged; Pump dirty; Debris in spout. | Replace filter; Clean pump; Clear any debris from the flower spout. |
| Water appears cloudy or has odor | 필터를 교체해야 하고, 분수대를 청소해야 합니다. | Replace filter; Perform a thorough cleaning of all fountain components. |
명세서
- 모델 이름: Catit Flower Fountain
- 용량: 3리터
- 치수(길이 x 너비 x 높이): 8.3" x 7.7" x 9"(21cm x 19.5cm x 19.5cm)
- 재료: 폴리프로필렌(PP), BPA 무함유
- 품목 무게: 0.6 킬로그램
- 색상: Green Standard
- 필터 유형: Triple Action Filter (Cotton mesh, Active carbon, Ion exchange resin)
Image: Diagram illustrating the dimensions of the Catit Flower Fountain in both centimeters and inches.
Image: The Catit Flower Fountain highlighting its 3L drinking capacity and its ability to provide fresh water 24/7.
보증
The Catit LED Flower Fountain comes with a 1년 보증 from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Catit web사이트를 방문하거나 고객 지원팀에 문의하세요.
지원하다
For further assistance, troubleshooting, or to purchase replacement parts and filters, please visit the official Catit website or contact their customer service department. You can also find additional resources and FAQs on the Catit brand store page on Amazon.
Catit Store: Visit the Catit Store on Amazon
