소개
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your Kern KB 2000-2N Precision Laboratory Balance. Please read this manual thoroughly before using the device to ensure accurate measurements and prolong the life of your balance.
The Kern KB 2000-2N is a precision laboratory balance designed for accurate weighing in various scientific and industrial applications, including jewelry and laboratory use. It features a maximum capacity of 2000 grams and an LCD display.
구성 요소 이상view
Familiarize yourself with the main components of your Kern KB 2000-2N balance.
그림 1: 위에view of the Kern KB 2000-2N Precision Laboratory Balance. This image displays the balance from a front-side angle, highlighting the weighing pan, the LCD display, and the control buttons. The balance features a silver finish and a compact design suitable for laboratory environments.
- 저울 접시: 무게를 <binary data, 8 bytes>할 물품을 올려놓는 스테인리스 스틸 플랫폼.
- 표시하다: LCD screen showing weight readings and operational indicators.
- 제어판: Buttons for power, tare, unit selection, and calibration.
- 레벨 표시기: Bubble level to ensure the balance is perfectly horizontal.
- 조절 가능한 다리: For leveling the balance.
- 전원 어댑터 포트: 외부 전원 공급 장치 연결 단자입니다.
설치 지침
- 짐 풀기: 포장에서 저울과 모든 부속품을 조심스럽게 꺼내십시오. 추후 운송 또는 보관을 위해 포장재를 보관해 두십시오.
- 놓기: Place the balance on a stable, level surface free from vibrations, drafts, and direct sunlight. Avoid locations near heat sources or strong electromagnetic fields.
- 수준 측량: Use the adjustable feet at the bottom of the balance to ensure the bubble in the level indicator is centered. This is crucial for accurate measurements.
- 전원 연결: Connect the provided power adapter to the balance's power port and then plug it into a suitable electrical outlet.
- 초기 워밍업: Allow the balance to warm up for at least 30 minutes after connecting power before performing any measurements or calibration. This stabilizes the internal components.
작동 지침
켜기/끄기
- 켜려면: 를 누르세요 [켜짐/꺼짐] button. The display will show a self-test sequence and then settle at 0.00 g.
- 끄기: 를 누르고 계세요 [켜짐/꺼짐] 디스플레이가 꺼질 때까지 버튼을 누르세요.
기본 계량
- Ensure the balance is level and displaying 0.00 g. If not, press the [영] or [살갈퀴] 버튼을 누르면 디스플레이가 0으로 설정됩니다.
- 무게를 <binary data, 8 bytes>할 물건을 저울 접시 중앙에 조심스럽게 올려놓으십시오.
- Wait for the reading on the LCD display to stabilize. The stability indicator (if present) will confirm a stable reading.
- Record the displayed weight.
- Remove the item from the pan. The display should return to 0.00 g or a negative value if tare was used.
용기 기능
용기 무게를 제외하는 용기 무게 제외 기능을 사용하면 내용물의 순중량만 측정할 수 있습니다.
- 빈 용기를 저울 접시 위에 올려놓으세요.
- 판독값이 안정화될 때까지 기다리십시오.
- 를 누르세요 [살갈퀴] button. The display will reset to 0.00 g, indicating the container's weight has been tared.
- 측정할 재료를 용기에 넣으세요. 디스플레이에 재료의 순중량이 표시됩니다.
- To clear the tare, remove the container from the pan and press [살갈퀴] again, or turn the balance off and on.
단위 변환
Your balance may support multiple weighing units. Refer to the balance's specific unit conversion procedure, typically involving a [단위] button. Pressing this button cycles through available units (e.g., grams, ounces, pounds, carats).
유지
청소
- 청소하기 전에 항상 밸런스 장치의 전원을 차단하십시오.
- 부드러운 d를 사용하세요amp 순한 세제를 묻힌 천으로 외부 표면을 닦으십시오.
- 연마성 세척제, 용제 또는 독한 화학 물질은 마감재와 내부 부품을 손상시킬 수 있으므로 사용하지 마십시오.
- Ensure no liquids enter the balance housing or display.
- Clean the stainless steel weighing pan regularly to prevent residue buildup.
저장
- When not in use for extended periods, store the balance in a dry, dust-free environment.
- If possible, use the original packaging for storage to protect against impacts.
- 극심한 온도 변화나 높은 습도가 있는 곳에 보관하지 마십시오.
구경 측정
Regular calibration is essential to maintain the accuracy of your precision balance. Refer to the manufacturer's specific calibration procedure, which typically involves using certified calibration weights. If you are unsure, consult the manufacturer's support resources.
문제 해결
This section addresses common issues you might encounter with your Kern KB 2000-2N balance.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Display shows "Err" or error code | Overload, unstable environment, internal fault. | Remove excess weight. Ensure stable surface. Turn off and restart. If persistent, contact support. |
| 부정확한 판독 | Balance not level, drafts, vibrations, not warmed up, needs calibration. | Level the balance. Move to a stable location. Allow warm-up time. Perform calibration. |
| 디스플레이가 켜지지 않습니다 | No power, faulty adapter, power button issue. | Check power connection and outlet. Ensure adapter is functional. Try pressing the power button firmly. |
| 체중이 변동합니다 | Drafts, vibrations, unstable surface, temperature changes. | Relocate the balance to a more stable environment. Close windows/doors to eliminate drafts. |
If you encounter a problem not listed here or if the suggested solutions do not resolve the issue, please contact KERN customer support for further assistance.
명세서
Key technical specifications for the Kern KB 2000-2N Precision Laboratory Balance:
- 상표: 장식 꼬리
- 모델: KB 2000-2N
- 최대 용량: 2000그램
- 디스플레이 유형: 액정표시장치
- 재료: 스테인리스 스틸(저울 접시)
- 색상: 은
- 추천 용도: Jewellery, Laboratory/Scientific applications
- 특징: 높은 중량 용량
- 제조업체: 장식 꼬리
- 한국어: 724086331604
보증 및 지원
For detailed information regarding the warranty coverage for your Kern KB 2000-2N Precision Laboratory Balance, please refer to the warranty card included with your product or visit the official KERN web사이트. 보증 약관은 지역에 따라 다를 수 있습니다.
Should you require technical support, spare parts, or service, please contact KERN customer service directly. Contact information can typically be found on the manufacturer's web사이트 또는 제품 포장.
