1. 서론
This document provides comprehensive instructions for the installation, operation, and maintenance of the Amphenol 10-101987-103 Circular Connector Strain Relief Adapter. This adapter is designed to provide robust strain relief for 6-pin circular connectors, enhancing cable durability and connection integrity in various applications.
적절한 기능과 안전을 보장하기 위해 설치나 사용을 시도하기 전에 이 설명서를 자세히 읽어보세요.
2. 제품 오버view
그만큼 Amphenol 10-101987-103 is a specialized accessory for circular connectors. It consists of a main adapter body and a two-piece clamp mechanism with securing screws. Its primary function is to prevent stress on cable connections by securing the cable firmly at the connector entry point.
그림 2.1: 위에view 의 Amphenol 10-101987-103 strain relief adapter components, including the main body, two clamp pieces, and two screws.
그림 2.2: The strain relief adapter body shown with the two clamp pieces and screws positioned separately, illustrating the individual components.
그림 2.3: 더 가까이 view of the strain relief adapter body, with the clamp pieces and screws ready for assembly, demonstrating the design for cable retention.
3. 설정 및 설치
Follow these steps to properly install the strain relief adapter onto your 6-pin circular connector:
- 커넥터를 준비하세요: Ensure your 6-pin circular connector is fully assembled and wired according to its specific instructions.
- Attach Adapter Body: Thread the main body of the 10-101987-103 adapter onto the rear of the circular connector. Tighten it securely by hand or with an appropriate tool, ensuring a snug fit without over-tightening.
- 케이블 위치: Route the cable through the opening of the adapter body.
- Cl 설치amp 조각: 두 개의 cl을 배치하십시오.amp pieces around the cable, inside the adapter body. Ensure the grooves on the clamp pieces align with the cable's diameter for a secure grip.
- Cl을 확보amps: Insert the provided screws through the holes in the clamp pieces and into the threaded holes in the adapter body. Tighten the screws evenly until the cable is firmly gripped by the clamp, providing effective strain relief. Do not overtighten, as this may damage the cable jacket.
- 설치 확인: Gently pull on the cable to confirm that it is securely held by the strain relief and that no undue stress is placed on the connector's internal connections.
4. 작동 원리
설치되면 Amphenol 10-101987-103 adapter functions passively to protect the cable-to-connector interface. It distributes mechanical stress (pulling, bending, twisting) away from the delicate solder joints or crimp connections within the circular connector, transferring it to the more robust cable jacket and the strain relief mechanism itself. This significantly extends the lifespan and reliability of the cable assembly.
5. 유지관리
그만큼 Amphenol 10-101987-103 strain relief adapter requires minimal maintenance. Periodically inspect the adapter for the following:
- 견고함: Ensure all screws and the main adapter body remain securely tightened. Re-tighten if any looseness is detected.
- 물리적 손상: Check for any cracks, bends, or corrosion on the metal components. Replace the adapter if significant damage is observed.
- 케이블 무결성: Inspect the cable jacket where it enters and exits the strain relief for signs of wear or damage.
To clean, wipe the adapter with a dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish.
6. 문제 해결
This section addresses common issues that may arise during the installation or use of the strain relief adapter.
- 문제: The adapter does not thread onto the circular connector.
- 해결책: Verify that the circular connector is compatible with a Size 14 adapter. Ensure threads are clean and free of debris. Do not force the adapter.
- 문제: The cable is not securely gripped by the clamp.
- 해결책: Ensure the correct cable diameter is used for this strain relief. Re-check that the clamp pieces are correctly seated and the screws are tightened evenly and sufficiently.
- 문제: Screws are difficult to tighten or loosen.
- 해결책: Use the correct screwdriver size. If threads are stripped or damaged, the adapter may need replacement.
7. 사양
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | Amp에놀 |
| 모델 번호 | 10-101987-103 |
| 유형 | Circular Connector Strain Relief Adapter |
| Compatible Connector Size | Size 14 (for 6-PIN CONNECTORS) |
| 색상/마감 | 올리브 드랍 |
| 재료 | Military Type (typically aluminum alloy with appropriate plating) |
| 인증 | RoHS 규제 |
| 부품 번호 | 10-101987-103 |
8. 보증 및 지원
For specific warranty information, please refer to the documentation provided at the point of purchase or contact Amphenol directly. General product support and technical assistance can be obtained through authorized Amphenol distributors or their official web대지.
추가 지원을 받으려면 다음을 방문하세요. www.amp헤놀닷컴
