소개
This manual provides essential information for the proper setup, operation, and maintenance of your BRESSER ExploreOne Metal Detector. Designed for junior explorers, this lightweight and adjustable metal detector is built to help discover hidden metallic objects.
Key features of your metal detector include:
- Detects objects up to 6 inches below the surface.
- Water-resistant base for use in damp 정황.
- Different tones to distinguish various precious metals.
- Built-in LED light for enhanced visibility, detachable for use as a flashlight.
- Adjustable length to accommodate users of different heights.
Image: The BRESSER ExploreOne Metal Detector, showcasin파란색과 흰색 디자인이 특징입니다.
설정
상자 안에 무엇이 들어있나요?
- ExploreOne Metal Detector unit
배터리 설치
The metal detector requires one 9V battery (not included). To install the battery:
- Locate the battery compartment, typically on the handle or control unit.
- 배터리 덮개를 엽니다.
- Insert a fresh 9V battery, ensuring correct polarity (+/-).
- 배터리 덮개를 단단히 닫으세요.
집회
Your metal detector is designed for easy assembly and adjustment:
- 검색 코일을 아래쪽 스템에 연결합니다.
- Attach the lower stem to the main adjustable shaft.
- Secure the control unit/handle to the top of the shaft.
- Adjust the shaft length to a comfortable height for the user. Loosen the locking collar, extend or retract the shaft, and then tighten the collar to secure.
- The LED light can be attached to the shaft for illumination or detached for use as a handheld flashlight.
Image: Close-up of the metal detector's search coil and adjustable lower shaft connection.
작동 지침
기본 동작
To begin searching for metallic objects:
- Turn on the metal detector using the power switch on the control unit.
- Hold the detector with the search coil parallel to the ground, about 1-2 inches above the surface.
- Sweep the search coil slowly from side to side in overlapping motions.
- When a metallic object is detected, the unit will emit an audible beep. The louder the beep, the closer you are to the object.
Detection Tones
The metal detector uses different tones to help identify various types of metals. Familiarize yourself with these tones by testing the detector on known metal objects (e.g., coins, aluminum foil, iron) before searching.
LED 조명 사용법
The built-in LED light provides illumination in low-light conditions. It can be used while attached to the detector for searching at dusk or detached and used as a standalone flashlight for examining discoveries.
방수성
The search coil and lower stem are water-resistant, allowing for detection in shallow puddles or damp 토양. 메모: The main control unit and battery compartment are not waterproof and should not be submerged.
비디오: 오버view of the BRESSER ExploreOne Metal Detector, demonstrating its features and use in various environments.
유지
- 청소: After each use, wipe down the detector with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. Ensure the search coil is clean of dirt and debris.
- 배터리 관리 : Remove the 9V battery if the detector will not be used for an extended period to prevent leakage and damage.
- 저장: Store the metal detector in a cool, dry place away from direct sunlight and extreme temperatures.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 감지기가 켜지지 않습니다. | 배터리가 방전되었거나 잘못 설치되었습니다. | Check battery polarity; replace with a fresh 9V battery. |
| 탐지 능력이 약하거나 일관성이 없습니다. | Low battery; too fast sweeping; interference. | Replace battery; sweep slower; move away from large metal objects or electrical lines. |
| LED 조명이 작동하지 않습니다. | Light switch off; battery issue. | Ensure light switch is on; check main unit battery or if light has its own small battery, check that. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 브레서 |
| 모델 번호 | 88-20001 |
| 색상 | 블루 앤 화이트 |
| 재료 | 플라스틱 |
| 전원 | Battery (1 x 9V required) |
| 품목 무게 | 2.05파운드 |
| 제품 치수 | 23.5 x 2.75 x 7.25 인치 |
| 가변 길이 | 예 |
| 국제 보호 등급 | IP54 (방수형 탐색 코일) |
| Working Distance (Detection Depth) | 최대 6인치 |
| 추천연령 | 8 - 15년 |
보증 및 지원
This product typically comes with a limited manufacturer's warranty. Please refer to the packaging or the manufacturer's official web구체적인 보증 약관은 해당 사이트에서 확인하세요.
For technical support, questions, or assistance, please contact BRESSER customer service. You may reach them at 866.252.3811.