1. 서론
This manual provides essential information for the proper installation, operation, and maintenance of your Behringer NEKKST K10S Audiophile 10" Studio Subwoofer. Please read these instructions thoroughly to ensure optimal performance and longevity of your device. The NEKKST K10S is an ultra-linear 300-Watt reference-class studio subwoofer designed to provide accurate low-frequency reproduction for professional audio environments.
2. 중요 안전 지침
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons. Keep these instructions for future reference.
- 이 지침을 읽어보세요.
- 이 지침을 잘 보관하세요.
- 모든 경고를 주의하세요.
- 모든 지시를 따르세요.
- 이 기기를 물 근처에서 사용하지 마십시오.
- 마른 천으로만 닦으십시오.
- 환기구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오.
- 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
- 극성 또는 접지형 플러그의 안전 목적을 저버리지 마십시오. 극성 플러그에는 두 개의 날이 있으며, 하나는 다른 하나보다 넓습니다. 접지형 플러그에는 두 개의 날과 세 번째 접지 갈래가 있습니다. 넓은 날 또는 세 번째 갈래는 안전을 위해 제공됩니다. 제공된 플러그가 콘센트에 맞지 않으면 전기 기술자에게 문의하여 오래된 콘센트를 교체하십시오.
- 전원 코드가 밟히거나 끼지 않도록 보호하세요. 특히 플러그, 편의용 콘센트 및 기기에서 나오는 부분은 보호하세요.
- 제조사가 지정한 부속품/액세서리만 사용하세요.
- 제조업체에서 지정하거나 장비와 함께 판매한 카트, 스탠드, 삼각대, 브래킷 또는 테이블과 함께만 사용하십시오. 카트를 사용하는 경우 카트/장비 조합을 이동할 때 넘어져 부상을 입지 않도록 주의하십시오.
- 번개 폭풍 시 또는 장기간 사용하지 않을 때는 기기의 플러그를 뽑아두세요.
- 모든 서비스는 자격을 갖춘 서비스 담당자에게 의뢰하십시오. 전원 코드나 플러그가 손상되었거나, 액체가 쏟아졌거나, 물체가 기기에 떨어졌거나, 기기가 비나 습기에 노출되었거나, 정상적으로 작동하지 않거나, 떨어졌을 때와 같이 기기가 어떤 식으로든 손상된 경우 서비스가 필요합니다.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- Behringer NEKKST K10S Audiophile 10" Studio Subwoofer
- 전원 코드
- 사용 설명서 (본 문서)
- 보증 정보
4. 제품 오버view
The Behringer NEKKST K10S is a high-performance studio subwoofer designed for accurate low-frequency monitoring. It features a powerful 300-Watt amplifier and a 10-inch high-excursion woofer with a deformation-resistant glass fiber cone.
그림 4.1: 앞쪽 view of the Behringer NEKKST K10S Studio Subwoofer. This image displays the subwoofer's sleek black enclosure, the prominent 10-inch woofer with its protective grille, and the Behringer logo at the bottom right. The NEKKST K10S model name is visible on the top left.
주요 특징:
- Ultra-linear 300-Watt reference-class studio subwoofer.
- High excursion 10" woofer with deformation-resistant glass fiber cone.
- Powerful bridge-mode amplifier for detailed low-frequency reproduction.
- Variable low-pass filter for optimal crossover alignment.
- Phase switch for seamless integration with stereo monitor systems.
제어 및 연결:
The rear panel of the NEKKST K10S provides all necessary controls and input/output connections for integration into your studio setup.
그림 4.2: Rear panel diagram of the Behringer NEKKST K10S. This image illustrates the various controls and connection ports, including balanced XLR inputs and outputs, unbalanced RCA inputs and outputs, a gain control knob, a low-pass filter frequency knob, and a phase switch. Power input and fuse holder are also visible.
- Balanced Inputs (XLR): For connecting professional audio equipment with balanced XLR outputs.
- 불균형 입력(RCA): For connecting consumer-grade audio equipment with RCA outputs.
- Balanced Outputs (XLR): For passing the signal through to your main studio monitors.
- 불균형 출력(RCA): For passing the signal through to other devices with RCA inputs.
- 게인 컨트롤 : 서브우퍼의 전체 출력 레벨을 조정합니다.
- 저역 통과 필터: Sets the upper frequency limit for the subwoofer, allowing you to blend it seamlessly with your main monitors.
- 위상 스위치: Allows you to invert the phase of the subwoofer's output, which can help optimize the acoustic alignment with your main monitors.
- Power Switch and AC Inlet: For connecting the power cord and turning the unit on/off.
5. 설정
5.1 배치
Proper placement of your subwoofer is crucial for optimal performance. Consider the following guidelines:
- Proximity to Main Monitors: Place the subwoofer in close proximity to your main stereo monitors to ensure a cohesive soundstage.
- 실내 음향: Avoid placing the subwoofer directly in corners, as this can lead to exaggerated and muddy bass response. Experiment with different positions to find the best acoustic balance in your room.
- 안정적인 표면: Ensure the subwoofer is placed on a stable, level surface to prevent vibrations and unwanted resonance. The NEKKST K10S includes integrated feet for stability.
그림 5.1: 옆 view of the Behringer NEKKST K10S, highlighting the integrated feet for stable placement. This image shows the robust construction and the design of the subwoofer's base.
5.2 연결
Connect your audio source and main monitors to the NEKKST K10S as follows:
- 전원 끄기 : Ensure all audio equipment, including the subwoofer and your main monitors, are powered off before making any connections.
- 입력 연결:
- For balanced sources (e.g., audio interface, mixer), connect XLR cables from your source's outputs to the NEKKST K10S's 밸런스 입력(XLR).
- For unbalanced sources (e.g., consumer audio equipment), connect RCA cables from your source's outputs to the NEKKST K10S's Unbalanced Inputs (RCA).
- Output Connection to Main Monitors:
- Connect XLR cables from the NEKKST K10S's Balanced Outputs (XLR) to the inputs of your main studio monitors.
- Alternatively, use RCA cables from the NEKKST K10S's Unbalanced Outputs (RCA) to your main monitors if they use RCA inputs.
- 전원 연결: Connect the supplied power cord to the AC inlet on the rear panel of the subwoofer, then plug it into a suitable power outlet.
6. 사용 설명서
6.1 초기 전원 켜기 및 게인 조정
- 모든 연결이 안전한지 확인하세요.
- Turn on your main studio monitors first, then power on the NEKKST K10S using the power switch on the rear panel.
- 로 시작하세요 제어권을 얻으세요 knob on the subwoofer set to its minimum position.
- Play some audio through your system. Gradually increase the 제어권을 얻으세요 on the subwoofer until the bass level integrates smoothly with your main monitors. The goal is to extend the low-frequency response without overpowering the main speakers.
6.2 Low-Pass Filter Adjustment
그만큼 저역 통과 필터 knob determines the highest frequency the subwoofer will reproduce. This is critical for a seamless transition between the subwoofer and your main monitors.
- Consult the specifications of your main studio monitors to find their low-frequency cutoff point.
- 설정하다 저역 통과 필터 on the NEKKST K10S slightly above or at the low-frequency cutoff of your main monitors. For example, if your monitors roll off at 80 Hz, start by setting the subwoofer's low-pass filter to around 80-100 Hz.
- Listen to various audio material and fine-tune the low-pass filter by ear to achieve the most natural and balanced sound.
6.3 상 스위치
그만큼 위상 스위치 (0°/180°) helps to correct potential phase cancellations or reinforcements that can occur when combining a subwoofer with main monitors. This is often dependent on the physical placement of the subwoofer relative to the main speakers.
- Play a piece of music with prominent bass.
- 토글 위상 스위치 between 0° and 180°.
- Select the setting that provides the most impactful, clear, and defined bass response. If the bass sounds thin or weak in one setting, switch to the other.
7. 유지관리
To ensure the longevity and optimal performance of your Behringer NEKKST K10S subwoofer, follow these simple maintenance guidelines:
- 청소: Use a soft, dry cloth to clean the exterior of the subwoofer. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish.
- 통풍: Ensure that the ventilation openings are not blocked. Adequate airflow is essential to prevent overheating.
- 저장: If storing the subwoofer for an extended period, keep it in a dry, dust-free environment, preferably in its original packaging.
- 전원 코드: Regularly inspect the power cord for any signs of damage. If damaged, replace it with an appropriate cord.
8. 문제 해결
If you encounter issues with your NEKKST K10S subwoofer, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 서브우퍼에서 소리가 나지 않습니다 |
|
|
| 약하거나 탁한 베이스 |
|
|
| 왜곡된 소리 |
|
|
9. 사양
Detailed technical specifications for the Behringer NEKKST K10S Audiophile 10" Studio Subwoofer:
| 특징 | 세부 사항 |
|---|---|
| 모델명 | K10S |
| 스피커 유형 | 서브우퍼 |
| 서브우퍼 직경 | 10 인치 |
| 스피커 최대 출력 전력 | 300 와트 |
| 전원 | 코드식 전기 |
| 연결 기술 | 열광한 |
| 오디오 출력 모드 | 스테레오 재생 |
| 제품 크기(D x W x H) | 15.91인치 깊이 x 15.51인치 너비 x 14.02인치 높이 |
| 품목 무게 | 38.36파운드(약 17.4kg) |
| 색상 | 검은색 |
| 제조업체 | 베링거 |
| 한국어: | 748252139047 |
10. 보증 및 지원
The Behringer NEKKST K10S Audiophile 10" Studio Subwoofer comes with a 1 Year Limited Warranty. For detailed warranty terms and conditions, please refer to the warranty information included in your package or visit the official Behringer web대지.
For technical support, service, or further inquiries, please contact Behringer customer support. You can typically find contact information on the official Behringer web사이트 또는 지역 유통업체를 통해 구매하세요.
온라인 리소스:
- 베링거 공식 Web대지: www.behringer.com
