DIG 3/4" 단일 배출 호스 끝단 프로그래밍 가능 타이머 사용 설명서

제품 끝view

The DIG Corp. Model 9001DB is a 3/4" hose end battery-operated timer designed for automated watering in home gardens and patios. It features a female hose thread inlet and a male hose thread outlet, allowing direct connection to a faucet and a standard garden hose. The timer is programmed using six intuitive buttons and an LCD display, offering a wide range of irrigation schedules. Key capabilities include up to 4 start times per day, watering durations from one minute to eleven hours and 59 minutes in one-minute increments, and a low battery indicator for convenient monitoring.

주요 특징

• 3/4" FHT Inlet and MHT Outlet: Ensures compatibility with standard garden hoses and faucets.
• 쉬운 프로그래밍: Utilizes six buttons and a large LCD display for straightforward setup of watering schedules.
• Flexible Watering Duration: Allows setting watering times from 1 minute up to 11 hours and 59 minutes, adjustable in 1-minute increments.
• 시작 시간이 여러 개인 경우: Supports up to 4 distinct watering start times per day.
• 배터리 부족 표시기: Provides a visual alert when battery power is low, ensuring uninterrupted operation.
• 내구성 있는 구조: Made from high-impact plastic (ABS) for outdoor use.

설치 가이드

1. 배터리 설치: Open the battery compartment (typically located on the back or side) and insert a new 9V alkaline battery. Ensure correct polarity. Close the compartment securely to maintain water resistance.
2. 수도꼭지에 연결: Thread the female hose thread inlet of the timer onto your outdoor faucet. Hand-tighten until snug. Do not overtighten.
3. 정원 호스 연결: Thread your garden hose onto the male hose thread outlet at the bottom of the timer. Hand-tighten securely.
4. 초기 전원 켜기: The LCD display should activate upon battery installation. If not, press the "ON" button.
5. 현재 시간 설정: Use the "Mode" button to navigate to the "Time" setting. Use the "+" and "-" buttons to adjust the current time (AM/PM). Press "Set" to confirm.
6. Set Watering Days: Navigate to the "Days" setting. Use the "+" and "-" buttons to select or deselect specific days of the week for watering. Press "Set" to confirm.
7. 물주기 시간 설정: Navigate to the "Duration" setting. Use the "+" and "-" buttons to set the desired watering time in minutes or hours. Press "Set" to confirm.
8. 시작 시간 설정: Navigate to the "Starts" setting. You can set up to 4 different start times. Use the "+" and "-" buttons to adjust each start time. Press "Set" to move to the next start time or confirm the last one.
9. 프로그램 활성화: Ensure the timer is in "ON" mode for the programmed schedule to run automatically.

타이머 작동하기

자동운전

Once programmed, the timer will automatically activate the water flow at the set start times, for the specified duration, on the selected days. Ensure the faucet is fully open for proper operation.

수동 조작

To manually turn on the water flow, press the "Manual" button. The water will typically run for the last programmed duration or a default manual duration. To turn off manual watering, press the "OFF" button.

Rain Off / Delay Function

If rain is expected or has occurred, you can temporarily suspend the watering schedule. Press the "Rain Off" button to activate a rain delay. The display will show the duration of the delay (e.g., 24 hours, 48 hours). Pressing the button repeatedly may cycle through different delay options or turn off the delay. The timer will resume its programmed schedule after the delay period ends.

Stopping the Program

To stop all automatic watering, press the "OFF" button. The display will indicate that the timer is off. To resume the programmed schedule, press the "ON" button.

유지

• 배터리 교체: Replace the 9V battery annually or when the low battery indicator appears on the LCD. Always use a fresh alkaline battery.
• 겨울 보관: Before the first frost, disconnect the timer from the faucet and hose. Remove the battery. Store the timer indoors in a dry, protected area where temperatures remain above freezing. This prevents damage from freezing water.
• 청소: Periodically inspect the inlet screen washer for debris and clean if necessary to ensure proper water flow. Wipe the exterior with a damp cloth; do not submerge the timer in water.

문제 해결

• Timer Not Turning On/Display Blank:
  • Check if the battery is installed correctly and has sufficient charge. Replace with a new 9V alkaline battery if needed.
  • 배터리 칸이 단단히 닫혔는지 확인하세요.
• 물이 흐르지 않음:
  • Verify the faucet is fully open.
  • Check if the timer is in "ON" mode and not in "Rain Off" or "OFF" mode.
  • Ensure the programming (time, duration, start times, days) is correctly set.
  • Inspect the inlet screen washer for clogs and clean if necessary.
  • 호스에 꼬임이나 막힘이 있는지 확인하십시오.
• Water Not Shutting Off:
  • Press the "OFF" button to manually stop the flow.
  • If the issue persists, the internal valve may be stuck or damaged. Disconnect from the faucet and contact customer support.
  • Ensure the watering duration is not set to an excessively long time.
• 프로그래밍의 어려움:
  • Refer to the "Setup Guide" section and the programming instructions printed on the timer's cover.
  • If the display is unresponsive, try removing and reinserting the battery to reset the unit.

기술 사양

보증 및 지원

This DIG product is designed for durability and reliable performance. While specific warranty details are not provided in this manual, DIG products typically come with a manufacturer's warranty. Please refer to the product packaging or the official DIG web최신 보증 정보 및 약관은 해당 사이트를 참조하십시오.

For technical assistance, troubleshooting beyond this guide, or warranty claims, please contact DIG customer support. Contact information can usually be found on the product packaging or the manufacturer's web대지.

시각적 가이드

해당 제품에 대한 판매자의 공식 제품 영상은 없습니다.