소개
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Graco Roomfor2 Click Connect Stand and Ride Stroller. Please read all instructions carefully before use and keep this manual for future reference. Failure to follow these instructions could result in serious injury or death.
The Graco Roomfor2 Stroller is designed to accommodate two children, offering a versatile solution for families. It features a front seat for a younger child and a rear standing platform or padded bench seat for an older child.
안전 정보
- Always secure children in the harness system.
- 유모차에 어린이를 혼자 두지 마십시오.
- Ensure the stroller is fully open and locked before placing children inside.
- Always engage the parking brake when the stroller is stationary.
- 유모차나 수납 바구니에 과도한 짐을 싣지 마십시오. 무게 제한은 제품 사양을 참조하십시오.
- Avoid placing hot liquids or heavy items on the parent tray.
- 계단이나 에스컬레이터에서 유모차를 사용하지 마십시오.
- 유모차를 접거나 펼칠 때 움직이는 부품에 손가락이 닿지 않도록 주의하세요.
- This stroller is not suitable for jogging or skating.
제품 특징
- Accommodates two children, each up to 50 lbs (22.6 kg).
- Front seat accepts all Graco SnugRide Classic Connect & Click Connect Infant Car Seats.
- Rear position offers a padded bench seat or standing platform for an older child.
- Multi-position reclining front seat for child comfort.
- Convenient one-hand fold mechanism with an automatic storage latch.
- Equipped with a child's tray with cup holders and a parent's tray with cup holders.
- Large storage basket for essentials.
그림 1: 위에view of the Graco Roomfor2 Click Connect Stand and Ride Stroller. This image displays the stroller in its open position, highlighting the front seat with its canopy and child tray, as well as the rear standing platform and parent handle.
설정 및 조립
Carefully remove all components from the packaging. It is recommended to assemble the stroller in a clear, open area.
- 유모차 펼치기: Release the storage latch. Hold the handle and lift upwards until the frame locks into place. Ensure both sides of the frame are securely locked.
- 바퀴 부착: Insert the front and rear wheels into their respective axles until they click securely. Pull on the wheels to ensure they are firmly attached.
- Attaching Child's Tray: Align the child's tray with the slots on the front seat armrests and push down until it clicks into place.
- Attaching Parent's Tray: Snap the parent's tray onto the handlebar frame.
- 캐노피 설치: Attach the canopy to the designated points on the front seat frame.
Always verify that all parts are correctly and securely attached before first use.
작동 지침
Front Seat Operation
- 하네스 시스템: Secure the child using the 5-point harness. Adjust shoulder straps to the appropriate height and ensure the crotch strap is snug.
- 좌석 리클라이닝: Locate the recline lever or strap behind the front seat. Adjust the seat to the desired reclining position. Ensure the child is properly secured after adjustment.
- 캐노피 조정: Extend or retract the canopy as needed for sun protection.
Rear Seat / Standing Platform Operation
- Padded Bench Seat: An older child can sit on the padded bench seat, facing the rear. Ensure they are stable and supervised.
- Standing Platform: An older child can stand on the rear platform, holding onto the stroller frame for support. Always supervise the child when using the standing platform.
Infant Car Seat Compatibility
The front seat of the Graco Roomfor2 Stroller is designed to accept all Graco SnugRide Classic Connect and Click Connect Infant Car Seats. To install:
- Remove the child's tray from the front seat.
- Place the infant car seat onto the front seat, aligning it with the designated connection points.
- Press down firmly until the car seat clicks securely into place. Pull up on the car seat to ensure it is locked.
- Always secure the infant with the car seat's harness system.
유모차 접기
The stroller features a one-hand fold mechanism:
- Ensure both children are removed from the stroller and the storage basket is empty.
- Locate the folding strap or handle, typically in the center of the front seat.
- Pull the strap upwards with one hand. The stroller will begin to fold.
- Continue to pull until the stroller is fully folded and the automatic storage latch engages.
- For compact storage, ensure the front wheels are locked straight.
유지
- 청소: 유모차 프레임을 광고용 천으로 닦으세요amp cloth and mild soap. Do not use abrasive cleaners. Fabric parts can be spot cleaned with mild detergent and cold water. Allow to air dry completely.
- 바퀴: Regularly check wheels for debris and clean as necessary. Lubricate moving parts with a silicone-based lubricant if they become stiff.
- 저장: 유모차는 직사광선을 피해 건조하고 서늘한 곳에 보관하여 변색 및 소재 손상을 방지하십시오.
- 검사: Periodically check all fasteners, rivets, and straps to ensure they are secure and not damaged. Replace worn or broken parts immediately.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 유모차가 부드럽게 펼쳐지거나 접히지 않습니다. | Storage latch engaged; mechanism obstructed; lack of lubrication. | Ensure latch is fully disengaged. Check for debris. Apply silicone lubricant to moving parts. |
| 바퀴에서 끽끽거리는 소리가 나거나 바퀴가 잘 돌아가지 않습니다. | 휠 차축에 이물질이 끼어 있거나 윤활유가 부족한 경우. | Clean wheels and axles. Apply silicone lubricant. |
| 하네스를 고정하거나 풀기가 어렵습니다. | Buckle mechanism obstructed; buckle dirty. | Check for food or debris. Clean buckle with a damp 옷감. |
| Stroller pulls to one side. | Uneven weight distribution; bent wheel axle; wheel lock engaged. | Distribute weight evenly. Check wheels for damage. Ensure front wheel locks are disengaged if not needed. |
명세서
| 모델 번호 | 1938419 |
| 상표 | 그라코 |
| 유모차 유형 | Tandem Stroller |
| 좌석 수 | 2명의 아이들 |
| Maximum Weight Recommendation (Each Child) | 50파운드(22.6kg) |
| 하네스 유형 | 5 포인트 |
| 재료 | Metal, Polyester |
| 제품 크기(LxWxH) | 106.68 x 54.61 x 102.87cm(42 x 21.5 x 40.5인치) |
| 품목 무게 | 12.02kg(26.5파운드) |
| 카시트 호환 | Yes (Graco SnugRide Classic Connect & Click Connect Infant Car Seats) |
보증 및 지원
For warranty information, replacement parts, or customer support, please refer to the warranty card included with your product or visit the official Graco web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
그라코 공식 Web대지: www.gracobaby.com
