1. 서론
This manual provides essential information for the proper installation, operation, and maintenance of your Datalogic QuickScan Lite QW2100 Bar Code Reader. The QW2100 is an entry-level linear imager designed for reading long, truncated 1D bar codes, commonly found in retail, light industrial, document processing, and office environments. Its ergonomic design ensures user comfort during daily operations.
안전하고 효율적인 작동을 위해 기기를 사용하기 전에 이 설명서를 꼼꼼히 읽어 주십시오.
2. 안전 정보
부상 및 기기 손상을 방지하기 위해 다음 안전 수칙을 준수하십시오.
- 장치를 극한의 온도, 습도 또는 직사광선에 노출시키지 마십시오.
- 기기를 떨어뜨리거나 심한 충격을 가하지 마십시오.
- 장치를 열거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
- 최적의 성능을 유지하려면 스캔 창을 깨끗하게 유지하십시오.
- Datalogic에서 승인한 액세서리와 전원 공급 장치만 사용하십시오.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Datalogic QuickScan Lite QW2100 Bar Code Reader
- USB Cable (if USB interface model) or RS-232/Keyboard Wedge Cable
- Quick Start Guide (refer to this manual for full instructions)
- Optional: Stand (if purchased as a kit)
4. 제품 오버view
The Datalogic QuickScan Lite QW2100 features a compact and ergonomic design for comfortable handheld use. Key components include:
- 스캐닝 창: Emits the scan line and reads bar codes.
- 트리거 버튼: Activates the scanning process.
- 표시 LED: Provides feedback on scanning status (e.g., successful read, error).
- Cable Connector Port: For connecting the interface cable.
5. 설정
Follow these steps to set up your QW2100 Bar Code Reader:
- 케이블 연결: Insert the appropriate interface cable (USB or RS-232/Keyboard Wedge) into the connector port at the base of the scanner. Ensure a secure connection.
- 호스트 장치에 연결:
- USB 인터페이스: Plug the USB connector into an available USB port on your computer or POS system. The operating system should automatically detect and install the necessary drivers.
- RS-232/Keyboard Wedge Interface: Connect the cable to the corresponding port on your host device. Configuration may be required using Datalogic Aladdin software or by scanning configuration bar codes (refer to the full programming manual for details).
- 전원 켜기: The scanner typically powers on automatically once connected to the host device. The indicator LED may illuminate to confirm power.
- Optional Stand Setup: If using the optional stand, assemble it according to its instructions and place the scanner in the stand for hands-free operation.
For advanced configuration, such as changing symbologies or interface settings, refer to the Datalogic Aladdin Configuration Software or the comprehensive programming manual.
6. 사용 설명서
To scan a bar code with your QW2100 reader:
- 목표: Point the scanning window of the reader at the bar code you wish to scan.
- 활성화: Press and hold the trigger button. A bright scan line will project from the scanning window.
- 주사: Position the scan line across the entire bar code. The QW2100 is designed for wide-angle scanning, making it effective for long or wide codes.
- 확인: Upon a successful read, the scanner will emit an audible beep (if enabled) and the indicator LED will flash. Release the trigger button.
For optimal performance, ensure the bar code is clean and not excessively creased or damaged. Adjust the distance between the scanner and the bar code for the best read.
7. 유지관리
Proper maintenance ensures the longevity and performance of your bar code reader:
- 스캔 창 정리: 부드럽고 보풀이 없는 천을 사용하십시오. dampened with a mild, non-abrasive cleaner (e.g., glass cleaner) to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials that could scratch the surface.
- C 청소asing: 외부를 닦으세요asing는 부드러운 d로 발음합니다.amp 옷감.
- 케이블 검사: Regularly check the interface cable for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
- 저장: 사용하지 않을 때는 스캐너를 직사광선과 극한 온도 변화를 피해 깨끗하고 건조한 곳에 보관하십시오.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스캐너의 전원이 켜지지 않습니다. | Cable not connected properly or host device not providing power. | Ensure the cable is securely connected to both the scanner and the host device. Try a different USB port or host device. |
| Scanner does not read bar codes. |
|
|
| Scanner reads intermittently. | Damaged cable or loose connection. | Check the cable for damage and ensure connections are secure. Replace cable if necessary. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | QW2120-BK |
| 상표 | 데이터로직 |
| 연결 기술 | USB Cable (also available in RS-232/Keyboard Wedge) |
| 전원 | AC (via host device USB or external power supply for RS-232) |
| 스캔 속도 | 400회 스캔/초 |
| 제품 크기(L x W x H) | 6.69 x 2.56 x 2.76인치(17 x 6.5 x 7cm) |
| 품목 무게 | 4.2 온스 |
| 색상 | 검은색 |
| 지원되는 기호 | Most standard 1D bar codes (e.g., EAN/UPC, Code 39, Code 128, Interleaved 2 of 5, etc.) |
10. 보증 및 지원
Datalogic products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Datalogic web대지.
For technical support, product registration, or to download the latest drivers and software (such as Datalogic Aladdin Configuration Software), please visit the Datalogic support portal or contact your local Datalogic representative.
Web대지: www.datalogic.com
