1. 제품 오버view
The Amtech L2130 is a 14-piece 1/2" drive impact driver set designed for the efficient removal or tightening of stubborn nuts, bolts, and screws. This manual provides instructions for the proper use and maintenance of your impact driver set.
The set includes a robust impact driver handle and a versatile assortment of chrome vanadium bits, all housed in a durable plastic storage case for convenience and organization.
Figure 1: Amtech L2130 14 Piece 1/2" Drive Impact Driver Set. This image displays the impact driver handle and the various bits neatly organized within its metal storage case.
2. 패키지 내용
The Amtech L2130 Impact Driver Set includes the following components:
- 1 x 1/2" Drive Impact Driver Handle
- Assorted Chrome Vanadium Bits:
- Slotted: 5mm, 6mm, 8mm
- Phillips: PH1, PH2, PH3
- Pozi: PZ1, PZ2, PZ3
- Hex: 4mm, 5mm, 6mm, 8mm
- 1 x Durable Plastic Storage Case
Figure 2: Amtech L2130 14 Piece 1/2" Drive Impact Driver Set as packaged. This image shows the product in its retail plastic packaging, highlighting the included components and key features.
3. 설정 및 비트 설치
- 올바른 비트를 선택하세요: Identify the type and size of the fastener (screw, bolt) you intend to work with. Choose the appropriate Phillips, Slotted, Pozi, or Hex bit from the set.
- 비트 삽입: The impact driver features a 1/2" square drive. Insert the chosen bit firmly into the driver's chuck. Ensure it is seated completely to prevent slippage during operation.
- 패스너를 고정하세요: Place the tip of the selected bit into the head of the fastener. Ensure a snug fit to prevent cam-out and damage to the fastener head.
4. 사용 설명서
The Amtech L2130 impact driver is designed to convert the force of a hammer blow into a powerful rotational force, making it effective for loosening seized fasteners or tightening them securely.
- 방향 설정: The impact driver typically has a directional selector (often a rotating collar or switch) to choose between tightening (clockwise) and loosening (counter-clockwise) modes. Ensure it is set to the desired direction.
- 도구 위치 지정: Place the impact driver with the installed bit firmly against the fastener head. Apply downward pressure to keep the bit engaged.
- Apply Impact: Strike the rear end of the impact driver with a hammer. A single, sharp blow is usually sufficient. The internal mechanism will convert this impact into a powerful rotational force, turning the fastener.
- 필요한 경우 반복: For very stubborn fasteners, multiple blows may be required. Re-position the tool and apply additional impacts as needed.
- 안전 예방 조치:
- Always wear appropriate personal protective equipment, including safety glasses, when using impact tools.
- Ensure the workpiece is stable and secured before applying force.
- Do not use excessive force that could damage the tool or the fastener.
- Keep hands clear of the striking area.
5. 유지관리
Proper maintenance ensures the longevity and optimal performance of your Amtech L2130 Impact Driver Set.
- 청소: After each use, wipe down the impact driver and bits with a clean, dry cloth to remove dirt, grease, and debris. For stubborn grime, a mild solvent can be used, ensuring it does not damage plastic components.
- 매끄럽게 하기: Periodically apply a light coat of machine oil to the moving parts of the impact driver mechanism to ensure smooth operation. Avoid over-lubrication.
- 저장: Always store the impact driver and bits in the provided plastic storage case. This protects the components from damage, corrosion, and loss, and keeps them organized. Store in a dry environment.
- 점검: Regularly inspect the bits for wear or damage. Replace any worn or damaged bits to maintain effective performance and prevent damage to fasteners. Check the impact driver handle for any signs of cracking or deformation.
6. 문제 해결
If you encounter issues while using your Amtech L2130 Impact Driver Set, consider the following:
- Fastener Not Turning:
- Ensure the correct bit size and type is being used for the fastener.
- Verify the impact driver's directional selector is set correctly (loosening or tightening).
- Apply firm downward pressure to keep the bit engaged with the fastener head.
- Ensure the hammer blow is sharp and direct to the center of the driver's striking surface.
- Bit Slipping (Cam-out):
- This often indicates an incorrect bit size or insufficient downward pressure.
- Inspect the bit for wear; a worn bit will slip more easily.
- Ensure the bit is fully seated in the impact driver's chuck.
- Driver Mechanism Feels Stiff:
- The internal mechanism may require lubrication. Refer to the Maintenance section.
- Clean any accumulated dirt or debris from the driver's moving parts.
7. 사양
| 상표 | 암텍 |
| 모델 번호 | L2130 |
| 드라이브 크기 | 1/2 인치 (13mm) |
| 조각 수 | 14 |
| 재료 | Plastic, Metal (Chrome Vanadium bits) |
| 마무리 유형 | 크롬 |
| 품목 무게 | 2.42파운드(약 1.1kg) |
| 제품 치수 | 9.45 x 9.45 x 1.57인치(약 24 x 24 x 4cm) |
| 포함된 구성 요소 | Impact Driver, Assorted Bits, Storage Case |
8. 보증 및 지원
Amtech products are designed for reliability and performance. This product comes with a 3년 제품 보증.
For any product-related inquiries or to utilize the free product advice service, please refer to the contact information provided on the product packaging or visit the official Amtech web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
