소개
Thank you for choosing the Mabe MCL1740PSBB0 17 kg Washing Center. This appliance combines a washer and a dryer into a single unit, designed for efficient laundry care. This manual provides essential information for the safe and effective installation, operation, and maintenance of your washing center. Please read these instructions carefully before using the appliance and keep them for future reference.

이미지: 앞면 view of the Mabe MCL1740PSBB0 17 kg Washing Center, showcasing its compact, stacked design with the dryer on top and washer below, both in white finish.
설정 및 설치
Proper installation is crucial for the safe and optimal performance of your washing center. Ensure all connections are secure and the unit is level before operation.
짐 풀기
- Carefully remove all packaging materials, including any shipping bolts or restraints.
- Inspect the appliance for any damage incurred during transit. Contact your retailer immediately if damage is found.
위치 요구 사항
- Place the washing center on a firm, level floor capable of supporting its weight (approximately 112 kg).
- 환기 및 유지보수를 위해 장치 주변에 충분한 여유 공간을 확보하십시오.
- The appliance requires access to a cold water supply, a drain, an electrical outlet, and an LP gas connection for the dryer.
사이
- 상수도: Connect the cold water inlet hose to a cold water tap. Ensure the connection is tight to prevent leaks.
- 배수: 배수 호스를 배수관이나 세탁조에 단단히 연결하고, 꼬임이 생기지 않도록 올바른 경로로 연결하십시오.
- 전기 : 전원 코드를 접지된 콘센트에 꽂으십시오. 연장 코드를 사용하지 마십시오.
- Gas Supply (Dryer): The dryer operates on LP Gas. Installation of the gas line must be performed by a qualified technician in accordance with local codes and regulations.
수준 측량
- Use a level to ensure the washing center is perfectly balanced.
- Adjust the leveling feet at the bottom of the unit by turning them clockwise or counter-clockwise until the appliance is stable and level.
작동 지침
This section guides you through the daily operation of your Mabe Washing Center.

이미지: 상세 view of the Mabe MCL1740PSBB0 Washing Center's control panel, showing the rotary knobs for wash and dry cycles, temperature, and water levels, along with indicator lights.
세탁기 작동
- 세탁물 넣기: Open the washer lid and load clothes loosely into the stainless steel drum. Do not overload.
- 세제 추가: Dispense appropriate detergent into the designated dispenser.
- 세탁 프로그램 선택: Use the control knob to select one of the 7 automatic wash programs:
- 강한 얼룩
- 백대하
- 그림 물감
- 청바지
- 대형 품목
- 빠른 사이클
- 섬세한
- Extra Spin Cycle (separate option)
- Select Water Level and Temperature: Adjust the water level (4 options) and temperature (4 options) using the respective knobs, or select an automatic setting.
- 시작 주기: Close the lid and press the Start button to begin the wash cycle. The infusor wash system will provide efficient cleaning.
건조기 작동
- 세탁물 넣기: 세탁한 옷을 세탁기에서 건조기로 옮깁니다.
- 린트 필터 청소: Always clean the lint filter before each drying cycle to ensure optimal performance and safety.
- Select Drying Cycle: Use the control knob to select one of the 4 drying cycles. You can also set a timer for specific drying durations.
- 시작 주기: Close the dryer door and press the Start button. The temperature sensor will help prevent over-drying.
유지
Regular maintenance ensures the longevity and efficiency of your Mabe Washing Center.
린트 필터 청소
- The lint filter is located inside the dryer. Pull it out to remove.
- Remove all accumulated lint by hand or with a soft brush.
- 필요한 경우 흐르는 물에 필터를 헹구고, 다시 삽입하기 전에 완전히 말랐는지 확인하세요.
- 중요한: Clean the lint filter before every drying cycle to prevent fire hazards and maintain drying efficiency.
세탁기 드럼 청소하기
- Periodically run a cleaning cycle with a washing machine cleaner or a mixture of white vinegar and baking soda to remove detergent residue and odors.
- Wipe down the stainless steel drum with a soft, damp cloth after each use to prevent water spots and buildup.
외부 청소
- 부드러운 d로 외부 표면을 닦으십시오.amp 천과 순한 비누.
- 마감재를 손상시킬 수 있는 연마성 세척제나 용제 사용은 피하세요.
문제 해결
서비스를 요청하기 전에 다음의 일반적인 문제와 해결책을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 세탁기가 시작되지 않음 | 전원 코드가 뽑혀 있음; 뚜껑이 닫히지 않음; 회로 차단기가 작동함. | Ensure power cord is securely plugged in; Close the lid completely; Reset the circuit breaker. |
| 세탁기에 물이 채워지지 않음 | Water supply turned off; Water inlet hose kinked. | Turn on the water supply; Straighten the water inlet hose. |
| 건조기가 가열되지 않음 | Gas supply off; Lint filter clogged; Circuit breaker tripped. | Ensure gas supply is on; Clean the lint filter; Reset the circuit breaker. |
| 과도한 진동/소음 | Appliance not level; Overloaded or unbalanced load. | Adjust leveling feet; Redistribute laundry evenly; Reduce load size. |
| 옷이 완전히 마르지 않아요 | Lint filter clogged; Overloaded dryer; Incorrect cycle selected. | Clean lint filter; Reduce load size; Select appropriate drying cycle. |
명세서
Technical details for the Mabe MCL1740PSBB0 17 kg Washing Center.
| 특징 | 세부 사항 |
|---|---|
| 모델 | MCL1740PSBB0 |
| 상표 | 메이브 |
| 용량(세탁기) | 17kg |
| 색상 | 하얀색 |
| 치수(높이 x 너비 x 깊이) | 192.28cm x 68cm x 78.36cm(75.7인치 x 26.8인치 x 30.8인치) |
| 제품 무게 | 112kg(247파운드) |
| Washer Drum Material | 스테인리스 스틸 |
| Washer Control Type | Knob (Perilla) |
| 세탁 횟수 | 8 (including extra spin) |
| 건조 시스템 | LP 가스 |
| 건조 사이클 수 | 5 (including timer option) |
| 특별 기능 | Time optimization (wash and dry simultaneously), Infusor wash system, Temperature sensor (dryer) |
| 한국어: | 757638512824 |
보증 및 지원
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Mabe offers customer support for product inquiries and service requests.
고객 서비스
If you encounter issues not covered in the troubleshooting section or require professional assistance, please contact Mabe customer service. Have your model number (MCL1740PSBB0) and serial number ready when you call.
Contact details for Mabe customer service can typically be found on the manufacturer's official web웹사이트 또는 제품 보증 카드에 명시되어 있습니다.





