1. 서론
The Smartwares SH5-TSM-A Smarthome Transmitter Indoor is a wireless magnetic contact designed to detect the opening and closing of doors and windows. This device integrates seamlessly with Homewizard and Smartwares home automation systems, allowing you to trigger actions such as turning lights on or off, or activating other connected devices based on the status of your doors and windows. It features a single channel for controlling individual or groups of devices and helps ensure that lights do not remain on unnecessarily.
2. 안전 정보
- 본 제품은 실내에서만 사용하도록 설계되었습니다.
- 기기를 습기, 극한의 온도 또는 직사광선에 노출시키지 마세요.
- 배터리는 어린이의 손이 닿지 않는 곳에 보관하십시오. 삼켰을 경우 즉시 의사의 진료를 받으십시오.
- 기기를 분해하거나 개조하지 마십시오. 이는 보증을 무효화하고 손상이나 부상을 초래할 수 있습니다.
- 사용한 배터리와 기기는 현지 규정에 따라 폐기하십시오.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Smartwares SH5-TSM-A Smarthome Transmitter Indoor (Main Unit)
- 자기 접점
- CR2 리튬 배터리 1개
- Mounting Materials (e.g., screws, adhesive tape)
4. 제품 오버view
The Smartwares SH5-TSM-A consists of two main parts: the transmitter unit and a magnetic contact. When these two parts are separated (e.g., a door opens), the transmitter sends a signal. A small button on the side of the main unit is used for pairing with your home automation system.
그림 1: 측면 view of the transmitter unit, highlighting the pairing button.
그림 2: 뒤로 view of the transmitter unit with the battery compartment and product information label.
5. 설치 및 설정
5.1. 배터리 설치
- Carefully open the main transmitter unit.
- Insert the provided CR2 Lithium battery into the battery compartment, ensuring correct polarity (+/-). Refer to Figure 2 for the battery compartment location.
- Close the unit securely.
5.2. 센서 장착
Choose a suitable location on a door or window frame where the main unit and the magnetic contact can be mounted parallel to each other and are in close proximity (within 1 cm) when the door/window is closed.
- Clean the mounting surface thoroughly to ensure good adhesion if using adhesive tape.
- Attach the main transmitter unit to the fixed part of the door/window frame.
- Attach the magnetic contact to the moving part of the door/window, ensuring it aligns with the main unit when closed.
- You can use the included adhesive tape for easy installation or screws for a more permanent fixture.
그림 3: 예ample installation of the magnetic contact on a door.
5.3. 수신기와 페어링
To integrate the SH5-TSM-A with your home automation system, it must be paired with a compatible Smartwares or Homewizard receiver/controller.
- Put your Smartwares or Homewizard receiver into pairing mode. Refer to your receiver's manual for specific instructions.
- On the SH5-TSM-A transmitter, press the small pairing button (refer to Figure 1) for approximately 3 seconds. The LED indicator on the transmitter should start blinking, indicating it is in pairing mode.
- Once successfully paired, the receiver will confirm the connection (e.g., via an LED indicator or app notification).
- Test the connection by opening and closing the door/window to ensure the receiver registers the status changes.
6. 운영
Once installed and paired, the Smartwares SH5-TSM-A operates automatically. When the magnetic contact separates (door/window opens), the transmitter sends a wireless signal to the paired receiver. When the contact closes, another signal is sent. Your home automation system can then be configured to perform specific actions based on these signals, such as:
- Turning on or off lights.
- Activating an alarm or siren.
- Sending notifications to your smartphone.
The system allows you to easily adjust the duration for which the receiver remains activated after a signal is received, providing flexibility for various automation scenarios.
7. 유지관리
7.1. 배터리 교체
The SH5-TSM-A uses one CR2 Lithium battery. When the battery level is low, the device may exhibit reduced range or stop functioning. Replace the battery as follows:
- Open the main transmitter unit.
- 기존 CR2 배터리를 제거하세요.
- Insert a new CR2 Lithium battery, observing correct polarity.
- Close the unit securely.
- 폐배터리는 지역 규정에 따라 책임감 있게 폐기하십시오.
7.2. 청소
부드럽고 마른 천으로 기기를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Device does not pair with receiver. | Low battery; Receiver not in pairing mode; Out of range. | Replace battery; Ensure receiver is in pairing mode; Move transmitter closer to receiver during pairing. |
| Sensor does not detect open/close events. | Battery depleted; Incorrect alignment of main unit and magnet; Obstruction. | Replace battery; Realign main unit and magnet (ensure they are close when closed); Remove any obstructions. |
| 무선 범위가 제한적입니다. | Obstacles (walls, metal objects); Interference from other devices. | Relocate the receiver or transmitter to improve line of sight; Minimize interference sources. |
9. 사양
- 모델 번호: BYRSH5TSMA
- 권tage: 3볼트(DC)
- 배터리 유형: CR2 리튬 배터리 1개 (포함)
- 충전식 배터리: 아니요
- 무선 범위: 최대 30m (개방된 들판)
- 색상: 하얀색
- 호환 장치: Home security systems, Smartwares and Homewizard systems
- 제조업체: 스마트웨어
- 국제 상품 코드: 08711658044712
10. 보증
This Smartwares SH5-TSM-A Smarthome Transmitter Indoor comes with a 2-year manufacturer's warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
11. 지원
For technical support, troubleshooting assistance, or warranty claims, please visit the official Smartwares website or contact their customer service department. Please have your model number (BYRSH5TSMA) and proof of purchase available when contacting support.
스마트웨어 Web대지: www.smartwares.eu
