Fermax LOFT BUS2 컬러 3.5인치 모니터 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the Fermax LOFT BUS2 Color 3.5-inch Monitor. The LOFT monitor is designed for use within the Fermax BUS2 digital intercom system, offering a simplified installation process and high-quality audio/video communication.

The Fermax LOFT monitor features an integrated design, a 3.5-inch color display, and is constructed from high-impact ABS plastic with a textured, easy-to-clean finish and UV protection for enhanced durability.

2. 안전 정보

• 설치는 해당 지역의 전기 규정 및 규정에 따라 자격을 갖춘 인력만이 수행해야 합니다.
• Disconnect power to the system before performing any installation, maintenance, or repair work.
• Do not expose the monitor to water, excessive moisture, or extreme temperatures.
• Use only Fermax-approved accessories and replacement parts.
• 간섭을 방지하기 위해 기기를 강한 전자기장에서 멀리 두십시오.

3. 제품 오버view

The Fermax LOFT BUS2 Color 3.5-inch Monitor serves as the indoor unit for your video intercom system. It allows you to see and communicate with visitors at the entrance panel and to open the door.

Figure 1: Fermax LOFT BUS2 Color 3.5-inch Monitor. The image displays the white monitor with a 3.5-inch screen, a handset on the left, and control buttons on the right, including door release and function buttons.

주요 구성 요소:

• 3.5인치 컬러 화면: Displays video from the outdoor entrance panel.
• 핸드셋 : For audio communication with visitors.
• 도어 릴리스 버튼: Activates the electric door lock.
• Function Buttons (F1, F2): Programmable for additional system functions (e.g., secondary door release, lighting control).
• 호출 버튼: To initiate communication or activate the screen.
• Volume/Brightness Controls: Adjust audio volume and screen brightness (location may vary, refer to specific model diagram).

4. 설정 및 설치

The Fermax LOFT monitor utilizes the BUS2 system, which simplifies installation with minimal wiring requirements while ensuring robust performance and high-quality audio/video signals throughout the installation. The system offers maximum immunity to external interference.

4.1 System Capabilities:

• Supports buildings with up to 199 dwellings.
• Accommodates up to 2 entry access points.
• Maximum distance from the first access point to the last dwelling: 250 meters.
• The BUS2 amplifier includes a voice synthesizer as standard.

4.2 Installation Steps (General):

1. 설치: Securely mount the monitor to a wall at an appropriate height using the provided mounting bracket and hardware.
2. 배선: Connect the BUS2 system wiring to the designated terminals on the monitor. Ensure all connections are secure and correctly polarized. Refer to the detailed wiring diagram provided with your specific installation kit.
3. 전원 연결: Connect the system to the main power supply. Verify that the power supply meets the system's requirements.
4. 시스템 구성 : After physical installation, the system may require configuration (e.g., addressing the monitor within the BUS2 network). Consult the main system controller manual for detailed programming instructions.

5. 사용 설명서

5.1 Receiving a Call:

When a visitor presses the call button at the entrance panel, the monitor will ring, and the screen will automatically activate, displaying the visitor's image.

5.2 Answering a Call:

Lift the handset to establish two-way audio communication with the visitor. If the screen is off, pressing the call button on the monitor may also activate it and establish communication.

5.3 Door Release:

통화 중에 도어 릴리스 버튼 (often marked with a key symbol) to unlock the entrance door. The BUS2 amplifier's voice synthesizer will announce: "door open, closing after entry."

5.4 Using Function Buttons (F1, F2):

The F1 and F2 buttons can be programmed for various auxiliary functions, such as activating a second door lock, turning on an external light, or calling another monitor within the system. Refer to your system's programming guide for specific functionalities.

5.5 Adjusting Volume and Brightness:

Use the dedicated controls (typically small dials or buttons on the side or bottom of the monitor) to adjust the audio volume of the call and the brightness of the screen display to your preference.

6. 유지관리

6.1 청소:

The monitor is made from high-impact ABS plastic with a textured finish that is easy to clean. Use a soft, damp cloth to wipe the surface. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and UV protection.

6.2 일반 관리:

• Ensure the monitor is not exposed to direct sunlight for prolonged periods, despite its UV protection.
• 모니터를 열려고 시도하지 마십시오.asing; this will void the warranty and may expose you to electrical hazards.
• If the handset cord becomes damaged, contact a qualified technician for replacement.

7. 문제 해결

• No Image/Sound: Check that the monitor is properly powered and all BUS2 wiring connections are secure. Verify the entrance panel is functioning correctly.
• 문이 안 열려요: Ensure the door release button is pressed firmly during a call. Check the wiring to the electric lock and the status of the BUS2 system's door release module.
• 오디오/비디오 품질이 좋지 않음: While the BUS2 system offers maximum immunity to interference, ensure there are no strong external electromagnetic sources near the wiring or monitor. Check for loose connections.
• 모니터가 응답하지 않습니다: Try cycling the power to the entire BUS2 system (turn off, wait 30 seconds, turn on). If the issue persists, contact technical support.

8. 사양

9. 보증 및 지원

For warranty information, please refer to the documentation provided at the time of purchase or contact your authorized Fermax dealer or installer. Technical support can be obtained through your local distributor or by visiting the official Fermax web대지.