츠미 3740

Tzumi ProBuds Sports Bluetooth Wireless Earbuds User Manual

모델: 3740

소개

Welcome to the user manual for your Tzumi ProBuds Sports Bluetooth Wireless Earbuds. This guide provides detailed instructions on how to set up, operate, and maintain your earbuds, ensuring optimal performance and longevity. Please read this manual thoroughly before using your device.

제품 끝view

The Tzumi ProBuds Sports Earbuds are designed for wireless audio enjoyment, featuring Bluetooth connectivity, a built-in microphone, and remote music controls. They are suitable for sports and exercise due to their secure in-ear fit.

Tzumi ProBuds Sports Bluetooth Wireless Earbuds, front view

그림 1: Tzumi ProBuds Sports Bluetooth Wireless Earbuds. This image displays the earbuds with their in-ear design, ear hooks for secure fit, and the inline control module with volume and multi-function buttons.

패키지 내용:

Tzumi ProBuds Sports Bluetooth Wireless Earbuds packaging

그림 2: Retail packaging for Tzumi ProBuds Sports Bluetooth Wireless Earbuds. The packaging highlights key features such as Bluetooth Smart, 7 hours play time, HD Voice Ready, and Built-in Microphone.

제어 및 표시기:

설정

1. 이어버드 충전:

  1. 인라인 제어 모듈에서 마이크로 USB 충전 포트를 찾으십시오.
  2. 제공된 마이크로 USB 케이블을 충전 포트에 연결하십시오.
  3. USB 케이블의 다른 쪽 끝을 USB 전원(예: 컴퓨터 USB 포트, USB 벽면 어댑터)에 연결합니다.
  4. 충전 중에는 LED 표시등이 켜지고, 완전히 충전되면 색상이 바뀌거나 꺼집니다.
  5. A full charge typically takes approximately 1 hour and provides up to 7 hours of play time.

메모: Ensure the earbuds are fully charged before initial use for optimal battery performance.

2. 블루투스 페어링:

Follow these steps to pair your Tzumi ProBuds with your Bluetooth-enabled device:

  1. Ensure your earbuds are fully charged and powered off. To power off, press and hold the Multi-function button until the LED indicator turns off.
  2. Disable Bluetooth on your smartphone or audio device temporarily.
  3. Place the earbuds close to your smartphone or audio device.
  4. 스마트폰이나 오디오 기기에서 블루투스를 활성화하세요.
  5. 보도자료 및 잡고 있다 the Multi-function button on the earbuds for approximately 5-7 seconds until the LED indicator flashes red and blue alternately. This indicates pairing mode.
  6. On your device, search for available Bluetooth devices. The earbuds should appear as "Tzumi ProBuds" or similar.
  7. Select "Tzumi ProBuds" from the list to connect.
  8. Once successfully paired, the LED indicator on the earbuds will typically flash blue slowly or turn off, and you may hear an audible confirmation.

중요한: If your device only connects for call audio and not media audio, try unpairing and re-pairing the earbuds, ensuring you hold the Multi-function button long enough to enter pairing mode before selecting them on your device.

작동 지침

전원 켜기/끄기:

음악 재생:

통화 관리:

유지

청소:

저장:

문제 해결

문제가능한 원인해결책
이어폰의 전원이 켜지지 않습니다.배터리가 부족합니다.Charge the earbuds fully using the provided Micro USB cable.
기기와 페어링할 수 없습니다.이어폰이 페어링 모드가 아닙니다. 기기의 Bluetooth가 꺼져 있습니다. 기기가 너무 멀리 떨어져 있습니다.
  • Ensure earbuds are powered off, then press and hold Multi-function button for 5-7 seconds until LED flashes red/blue.
  • 기기에서 Bluetooth가 활성화되어 있는지 확인하세요.
  • Keep earbuds within 1 meter of your device during pairing.
  • 기기에서 블루투스를 껐다가 다시 켜보세요.
소리가 나지 않거나 간헐적으로 소리가 납니다.Not properly paired; volume too low; device out of range.
  • Re-pair the earbuds (refer to "Bluetooth Pairing" section).
  • 이어버드와 연결된 기기의 볼륨을 모두 높이세요.
  • Ensure earbuds are within 10 meters (33 feet) of the connected device.
  • Check if media audio is enabled in your device's Bluetooth settings for the earbuds.
Left earbud stopped working.Internal connection issue or defect.This may indicate a hardware issue. Contact Tzumi customer support for assistance.

명세서

안전 정보

이어폰을 안전하고 올바르게 사용하려면 다음 안전 지침을 준수하십시오.

보증 및 지원

보증 정보 또는 기술 지원에 대해서는 구매 시 동봉된 설명서를 참조하거나 Tzumi 공식 웹사이트를 방문하십시오. website. If you encounter issues not covered in this manual, please contact Tzumi customer service for assistance.