Zebra ZT220 직접 감열/열전사 프린터 사용 설명서

1. 서론

The Zebra ZT220 is a robust and reliable direct thermal and thermal transfer printer designed for various label printing applications. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your ZT220 printer to ensure optimal performance and longevity.

Key features include a 4.09-inch print width, 203 dpi resolution, and connectivity options such as USB and Serial. It supports both direct thermal printing (no ribbon required) and thermal transfer printing (requires ribbon) for versatile media compatibility.

2. 안전 정보

Please read and understand all safety instructions before operating the printer. Failure to follow these instructions may result in injury or damage to the printer.

• 전원: Use only the power supply provided with the printer. Ensure the power outlet is properly grounded.
• 통풍: Do not block ventilation openings. Ensure adequate airflow around the printer.
• 환경: Operate the printer in a clean, dry environment, away from direct sunlight, excessive heat, and moisture.
• 뜨거운 표면: The printhead can become very hot during operation. Avoid touching it immediately after printing.
• 움직이는 부품: 작동 중에는 움직이는 부분에 손이나 헐렁한 옷을 가까이 두지 마십시오.
• 청소: Disconnect power before cleaning the printer. Use a soft, damp 천으로 닦으세요. 연마성 세척제나 용제는 피하세요.

3. 패키지 내용

Verify that all items are present in the printer package:

• Zebra ZT220 Printer
• 전원 코드
• USB 케이블
• 빠른 시작 가이드
• Documentation CD (may contain drivers and full user manual)

4. 물리적 특징 및 구성 요소

Familiarize yourself with the main components of your Zebra ZT220 printer.

그림 4.1: 앞-오른쪽 view of the Zebra ZT220 printer with a label roll loaded. The image shows the control panel on the left, the main body of the printer, and the media compartment on the right with a label exiting the print mechanism.

4.1 제어판

• 전원 버튼: 프린터를 켜거나 끕니다.
• 피드 버튼: 한 레이블을 발전시킵니다.
• 일시 정지 버튼: 인쇄를 일시 중지하거나 재개합니다.
• 취소 버튼 : 현재 인쇄 작업을 취소합니다.
• 상태 표시기 : LEDs to show printer status (e.g., Ready, Error, Data).

4.2 후면 패널 연결

• 전원 포트: 전원 코드를 연결합니다.
• USB 포트: Connects to a computer for data transfer.
• 시리얼 포트 : Connects to a computer or other device via serial cable.

5. 설정

5.1 하드웨어 설치

1. 놓기: Place the printer on a stable, flat surface with adequate space for media loading and output.
2. 전원 연결: Connect the power cord to the printer's power port and then to a grounded electrical outlet. Do not power on yet.
3. 데이터 케이블을 연결하세요: Connect the USB cable from the printer's USB port to an available USB port on your computer, or connect a serial cable to the serial port.

5.2 미디어(라벨) 로딩

1. Open the printer's media cover.
2. Place the roll of labels onto the media supply hanger. Ensure the labels feed from the bottom of the roll.
3. Thread the labels through the media guides. Adjust the guides to fit the width of your labels snugly but without binding.
4. Pull the leading edge of the labels past the printhead and out through the front slot.
5. 미디어 덮개를 닫습니다.

5.3 Loading Ribbon (for Thermal Transfer Printing)

If you are performing direct thermal printing, you can skip this step.

1. Open the printer's media cover.
2. 리본 롤을 공급 스핀들에 끼우고 리본이 위쪽에서 풀리도록 하십시오.
3. Attach the leading edge of the ribbon to the take-up spindle.
4. Rotate the take-up spindle clockwise a few turns to ensure the ribbon is taut and aligned.
5. 미디어 덮개를 닫습니다.

5.4 드라이버 설치

1. 전원 켜기: 프린터의 전원 버튼을 누릅니다.
2. 드라이버 설치: Insert the documentation CD into your computer's CD-ROM drive and follow the on-screen instructions to install the printer drivers. Alternatively, download the latest drivers from the official Zebra web대지.
3. 프롬프트를 따르십시오: During installation, your operating system may detect the new hardware and prompt you to install drivers. Follow these prompts.
4. 설치 확인: After installation, check your computer's "Devices and Printers" (Windows) or "Printers & Scanners" (macOS) to ensure the Zebra ZT220 is listed and ready.

6. 프린터 작동

6.1 기본 인쇄

1. 프린터의 전원이 켜져 있고 컴퓨터에 연결되어 있는지 확인하세요.
2. Load the appropriate media and ribbon (if using thermal transfer).
3. 인쇄하려는 문서 또는 애플리케이션을 엽니다.
4. 애플리케이션 메뉴에서 "인쇄"를 선택하세요.
5. Choose the "Zebra ZT220" printer from the list of available printers.
6. Adjust print settings (e.g., label size, print darkness, print speed) as needed in the printer preferences.
7. "인쇄"를 클릭하여 인쇄 작업을 프린터로 보내십시오.

6.2 Calibrating the Printer

Calibration ensures accurate label sensing and print registration. Refer to the full user manual or Zebra's support website for detailed calibration procedures, which often involve specific button sequences on the control panel or software utilities.

7. 유지관리

7.1 프린트 헤드 청소

Regular cleaning of the printhead is crucial for maintaining print quality and extending printhead life. Clean the printhead after every few rolls of labels or if print quality degrades.

1. 프린터 전원을 끄고 전원 코드를 뽑으세요.
2. 미디어 커버를 엽니다.
3. Using a Zebra printhead cleaning pen or a cotton swab lightly moistened with 99.9% isopropyl alcohol, gently wipe across the dark line of the printhead from center to edge.
4. Allow the printhead to dry completely (approximately 1 minute) before closing the cover and reconnecting power.

7.2 플래튼 롤러 청소

The platen roller helps feed the media. Clean it periodically to prevent media jams and ensure smooth operation.

1. 프린터 전원을 끄고 전원 코드를 뽑으세요.
2. 미디어 커버를 엽니다.
3. Using a lint-free cloth lightly moistened with 99.9% isopropyl alcohol, wipe the surface of the platen roller while rotating it.
4. 덮개를 닫고 전원을 다시 연결하기 전에 완전히 건조시키십시오.

8. 문제 해결

This section addresses common issues you might encounter with your ZT220 printer.

9. 사양

Below are the technical specifications for the Zebra ZT220 printer:

• 인쇄 방법: Direct Thermal / Thermal Transfer
• 인쇄 해상도: 203dpi(인치당 도트 수)
• Maximum Print Width: 4.09인치(104mm)
• 최대 인쇄 속도: 6 inches per second (152 mm/s)
• 연결성: USB, 직렬
• 프린터 출력: 단색화
• 품목 무게: 22.8파운드(10.34kg)
• 호환 장치: PC
• 제조업체: O.E.M. (Zebra)
• 첫 번째 이용 가능: 25년 2015월 XNUMX일

10. 보증 정보

Warranty terms and conditions for the Zebra ZT220 printer are typically provided with the product at the time of purchase or can be found on the official Zebra website. Please refer to your purchase documentation or the manufacturer's website for specific warranty details, coverage periods, and claim procedures.

11. 지원

For further assistance, technical support, or to download the latest drivers and firmware, please visit the official Zebra support website. You may also find additional resources, FAQs, and contact information for customer service there.

Zebra Technologies Official Web대지: www.zebra.com