1. 서론
This manual provides essential information for the installation, operation, and maintenance of the Nice TT2N receiver. The TT2N is a control unit designed for roller shutters, featuring an integrated radio receiver. It is compatible with 230V AC roller shutter motors up to 500W. Please read these instructions carefully before installation and use to ensure proper function and safety.
2. 안전 정보
- Installation and wiring must be performed by qualified personnel in accordance with local electrical codes and regulations.
- 설치, 배선 또는 유지 보수 작업을 수행하기 전에 반드시 주 전원 공급 장치를 차단하십시오.
- The device operates on 230V AC. Handle with extreme care to avoid electric shock.
- 기기를 습기, 극한 온도 또는 직사광선에 노출시키지 마십시오.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- Do not attempt to modify or repair the unit yourself. Contact qualified service personnel.
3. 패키지 내용
- 1 x Nice TT2N Receiver Unit
4. 제품 오버view
The Nice TT2N is a compact control unit designed for seamless integration with roller shutter systems. It features clearly marked connection points for power and motor control, along with an integrated radio receiver for remote operation.
Figure 1: Nice TT2N Receiver Unit. The image displays the Nice TT2N receiver unit, a compact white rectangular device. One side features multiple numbered connection ports (1-6) and a simplified wiring diagram indicating connections for power (N, L) and motor control. Another side shows labels for 'Push' and 'Led', suggesting a button and indicator light for local control and status indication. A thin white antenna wire extends from the top of the unit. The unit's dimensions are approximately 40 x 33 x 18 mm.
5. 설정 및 설치
The Nice TT2N receiver is designed for integration with 230V AC roller shutter motors up to 500W. It also allows for connection of a wired push-button for local control.
5.1 배선 연결
Refer to the wiring diagram printed on the unit (as shown in Figure 1) and the detailed instructions provided with your motor for specific connection points. General connections include:
- 전원 공급 장치: Connect the 230V AC power supply to the designated 'N' (Neutral) and 'L' (Live) terminals.
- 모터 연결: Connect the roller shutter motor wires to the appropriate output terminals (typically for 'Up' and 'Down' movement).
- Wired Push-Button (Optional): A push-button can be connected for cable control. This allows for various operational modes: no lowering, always raised, or always lowered, depending on configuration.
중요한: Ensure all connections are secure and insulated. Incorrect wiring can damage the unit or motor and poses a safety risk.
6. 사용 설명서
The TT2N receiver allows control of your roller shutter via a compatible Nice radio transmitter or a wired push-button.
6.1 리모컨 프로그래밍
The process for programming a Nice radio transmitter to the TT2N receiver typically involves a sequence of button presses on the receiver and the remote. Specific steps may vary; consult the detailed programming guide available from Nice or the product's official documentation. A common method involves:
- Pressing the 'Push' button on the TT2N unit for a short duration until the 'Led' indicator lights up.
- Immediately pressing a button on the remote control you wish to program.
- The 'Led' on the TT2N should flash or change state to confirm successful programming.
6.2 Wired Push-Button Operation
If a wired push-button is connected, it can be used for direct control. The operational mode (e.g., single press for full open/close, or continuous press for movement) will depend on the configuration set during installation or programming.
7. 유지관리
The Nice TT2N receiver is designed for long-term, reliable operation with minimal maintenance. Follow these general guidelines:
- 기기를 깨끗하고 먼지가 없는 상태로 유지하세요. 청소 시에는 부드럽고 마른 천을 사용하세요.
- 연마성 세척제나 용제를 사용하지 마십시오.
- Regularly check all wiring connections for tightness and signs of wear.
- Ensure the unit is not obstructed or covered, allowing for proper ventilation.
8. 문제 해결
If you encounter issues with your Nice TT2N receiver, consider the following common problems and solutions:
- 장치가 응답하지 않습니다:
- 기기의 전원 공급 장치를 확인하십시오.
- 모든 배선 연결이 안전한지 확인하세요.
- Ensure the remote control has working batteries and is within range.
- Remote control not operating the shutter:
- Confirm the remote control is correctly programmed to the TT2N receiver. Refer to Section 6.1.
- Check for any interference that might be blocking the radio signal.
- Shutter movement is erratic or incomplete:
- This may indicate an issue with the motor itself or its limit switch settings, rather than the receiver.
- Ensure the motor's power rating does not exceed the TT2N's 500W limit.
- 프로그래밍에 어려움이 있습니다:
- Some users have reported that the included instructions for programming can be minimal. It is recommended to search for more detailed programming guides or tutorials online, or contact Nice support for assistance.
If problems persist after attempting these solutions, contact a qualified technician or Nice customer support.
9. 사양
| 제조업체 | 멋진 |
| 모델 번호 | TT2N |
| 제품 크기(L x W x H) | 40 x 33 x 18 mm (approximate unit dimensions) |
| 패키지 치수(L x W x H) | 20 x 15 x 3cm |
| 무게 | 60그램 |
| 색상 | 하얀색 |
| 전원 공급 장치 | 230V 교류 |
| 빈도 | 433.920MHz |
| 최대 모터 출력 | 500와트 |
| 포함된 구성 요소 | TT2N Receiver Unit |
| 필요한 배터리 | 아니요 |
| 원산지 | 이탈리아 |
10. 보증 및 지원
Specific warranty information for the Nice TT2N receiver is not provided in this document. Please refer to the official Nice web자세한 보증 약관은 해당 웹사이트를 참조하거나 판매점에 문의하십시오.
For technical support, additional documentation, or service inquiries, please visit the official Nice website or contact their customer service department. A downloadable manual may be available on the manufacturer's website, which could offer more in-depth programming and installation details.
제조업체: 멋진
Web대지: www.niceforyou.com (지역 코드가 맞는지 확인해 주세요) web대지)
